No points in 9pm and 12am updates for gpu3?

Moderators: Site Moderators, FAHC Science Team

Post Reply
KRAM
Posts: 17
Joined: Sun Nov 28, 2010 4:31 pm

No points in 9pm and 12am updates for gpu3?

Post by KRAM »

I looked through my logs and see there was a bit of time the gpu3 servers were down yesterday, but I know I had gpu3 wu's turned in that should have given me points in the 9pm and 12am updates. I see some other folks that normally have points in every update didn't have points in these updates also.

So was this down server problem also a points giving issue?

Thank You.
KRAM
Posts: 17
Joined: Sun Nov 28, 2010 4:31 pm

Re: No points in 9pm and 12am updates for gpu3?

Post by KRAM »

Come to think of it, even my 3am points update is low.

The points updates I'm looking at are on EOC, hence the 3 hour split on update times.
sco01
Posts: 79
Joined: Sun Mar 21, 2010 8:52 pm
Hardware configuration: Core i7 3930K(C2)@4,2 (1.30v)
Swiftech Apogee Drive II + MCR-H220 Radiator
Asus P9X79
4*4Gb SEC 1600@1866 1.5v
GeForce GTX780ti ref (nztx G10+zalman lq315)
Creative X-Fi Titanium Fatal1ty
Lite-On iHAS124-34
HDD- WD3000GLFS + 2*Hitaсhi HDS723030BLE640 + 2*HDT721010SLA360
case-Corsair Obsidian 700D
PSU - Seasonic Platinum 860W (SS-860XP2)

2) Xeon E5645@4Ghz (1,34v)
ASUS P6T
Thermalright Silver Arrow
Corsair TR3X6G1600C7 (3x2048Mb, 7-7-7-20 1,62v)
GeForce GTX780 ref (nztx G10+corsair H75)
Zotac GTX980 AMP! Edition (ZT-90204-10P)
Hitachi 320Gb HTS543232A7A384
case - Chieftec LBX-03B Dremel edition :-)
PSU - Zalman ZM-850HP+ (Enhance silver)

APC SUA1500RMI2U
APC SUA1500RMI2U

Re: No points in 9pm and 12am updates for gpu3?

Post by sco01 »

The same, no job for 6 hours, the logs are successfully sent

Image
VijayPande
Pande Group Member
Posts: 2058
Joined: Fri Nov 30, 2007 6:25 am
Location: Stanford

Re: No points in 9pm and 12am updates for gpu3?

Post by VijayPande »

We'll look into it, but everything looks pretty good from what we see now. Could you be more specific (either project #'s or server IP's that you think aren't working correctly)?
Prof. Vijay Pande, PhD
Departments of Chemistry, Structural Biology, and Computer Science
Chair, Biophysics
Director, Folding@home Distributed Computing Project
Stanford University
dmaine
Posts: 3
Joined: Tue Nov 30, 2010 12:32 am

Re: No points in 9pm and 12am updates for gpu3?

Post by dmaine »

Vijay, here is a specific 6811 that did not credit this morning, Project: 6811 (Run 0, Clone 269, Gen 19, userid is dmaine

Code: Select all


--- Opening Log file [December 1 15:05:26 UTC] 


# Windows GPU Console Edition #################################################
###############################################################################

                       Folding@Home Client Version 6.40r1

                          http://folding.stanford.edu

###############################################################################
###############################################################################

Launch directory: E:\FAH GPU Tracker V2\GPU0
Executable: E:\FAH GPU Tracker V2\FAH_GPU3.exe
Arguments: -oneunit -forcegpu nvidia_fermi -advmethods -verbosity 9 -gpu 0 

[15:05:26] - Ask before connecting: No
[15:05:26] - User name: dmaine (Team 33)
[15:05:26] - User ID: 7E21AFFE288CF722
[15:05:26] - Machine ID: 3
[15:05:26] 
[15:05:26] Gpu type=3 species=20.
[15:05:26] Work directory not found. Creating...
[15:05:26] Could not open work queue, generating new queue...
[15:05:26] - Preparing to get new work unit...
[15:05:26] Cleaning up work directory
[15:05:26] + Attempting to get work packet
[15:05:26] Passkey found
[15:05:26] - Will indicate memory of 8182 MB
[15:05:26] Gpu type=3 species=20.
[15:05:26] - Detect CPU.[15:05:26] - Autosending finished units... [December 1 15:05:26 UTC]
 Vendor: AuthenticAMD, Family: 15, Model: 4, Stepping: 3
[15:05:26] - Connecting to assignment server
[15:05:26] Connecting to http://assign-GPU.stanford.edu:8080/
[15:05:26] Trying to send all finished work units
[15:05:26] + No unsent completed units remaining.
[15:05:26] - Autosend completed
[15:05:27] Posted data.
[15:05:27] Initial: 40AB; - Successful: assigned to (171.64.65.64).
[15:05:27] + News From Folding@Home: Welcome to Folding@Home
[15:05:27] Loaded queue successfully.
[15:05:27] Gpu type=3 species=20.
[15:05:27] Sent data
[15:05:27] Connecting to http://171.64.65.64:8080/
[15:05:27] Posted data.
[15:05:27] Initial: 0000; - Receiving payload (expected size: 130859)
[15:05:28] - Downloaded at ~127 kB/s
[15:05:28] - Averaged speed for that direction ~127 kB/s
[15:05:28] + Received work.
[15:05:28] + Closed connections
[15:05:28] 
[15:05:28] + Processing work unit
[15:05:28] Core required: FahCore_15.exe
[15:05:28] Core found.
[15:05:28] Working on queue slot 01 [December 1 15:05:28 UTC]
[15:05:28] + Working ...
[15:05:28] - Calling '.\FahCore_15.exe -dir work/ -suffix 01 -nice 19 -priority 96 -nocpulock -checkpoint 3 -verbose -lifeline 6980 -version 640'

[15:05:28] 
[15:05:28] *------------------------------*
[15:05:28] Folding@Home GPU Core
[15:05:28] Version 2.14 (Thu Nov 11 10:05:53 PST 2010)
[15:05:28] 
[15:05:28] Build host: SimbiosNvdWin7
[15:05:28] Board Type: NVIDIA/CUDA
[15:05:28] Core      : x=15
[15:05:28]  Window's signal control handler registered.
[15:05:28] Preparing to commence simulation
[15:05:28] - Looking at optimizations...
[15:05:28] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[15:05:28] - Created dyn
[15:05:28] - Files status OK
[15:05:28] sizeof(CORE_PACKET_HDR) = 512 file=<>
[15:05:28] - Expanded 130347 -> 541491 (decompressed 415.4 percent)
[15:05:28] Called DecompressByteArray: compressed_data_size=130347 data_size=541491, decompressed_data_size=541491 diff=0
[15:05:28] - Digital signature verified
[15:05:28] 
[15:05:28] Project: 6811 (Run 0, Clone 269, Gen 19)
[15:05:28] 
[15:05:28] Assembly optimizations on if available.
[15:05:28] Entering M.D.
[15:05:30] Tpr hash work/wudata_01.tpr:  1911510154 4241776865 2891567597 3586080238 979863816
[15:05:30] Working on Protein
[15:05:30] Client config found, loading data.
[15:05:31] Starting GUI Server
[15:14:26] Completed    500000 out of 50000000 steps (1%).
[15:23:20] Completed   1000000 out of 50000000 steps (2%).
[15:32:13] Completed   1500000 out of 50000000 steps (3%).
[15:41:08] Completed   2000000 out of 50000000 steps (4%).
[15:50:03] Completed   2500000 out of 50000000 steps (5%).
[15:58:57] Completed   3000000 out of 50000000 steps (6%).
[16:07:50] Completed   3500000 out of 50000000 steps (7%).
[16:16:44] Completed   4000000 out of 50000000 steps (8%).
[16:25:38] Completed   4500000 out of 50000000 steps (9%).
[16:34:34] Completed   5000000 out of 50000000 steps (10%).
[16:43:32] Completed   5500000 out of 50000000 steps (11%).
[16:52:29] Completed   6000000 out of 50000000 steps (12%).
[17:01:23] Completed   6500000 out of 50000000 steps (13%).
[17:10:18] Completed   7000000 out of 50000000 steps (14%).
[17:19:12] Completed   7500000 out of 50000000 steps (15%).
[17:28:07] Completed   8000000 out of 50000000 steps (16%).
[17:37:00] Completed   8500000 out of 50000000 steps (17%).
[17:45:54] Completed   9000000 out of 50000000 steps (18%).
[17:54:48] Completed   9500000 out of 50000000 steps (19%).
[18:03:44] Completed  10000000 out of 50000000 steps (20%).
[18:12:41] Completed  10500000 out of 50000000 steps (21%).
[18:21:37] Completed  11000000 out of 50000000 steps (22%).
[18:30:33] Completed  11500000 out of 50000000 steps (23%).
[18:39:27] Completed  12000000 out of 50000000 steps (24%).
[18:48:21] Completed  12500000 out of 50000000 steps (25%).
[18:57:15] Completed  13000000 out of 50000000 steps (26%).
[19:06:10] Completed  13500000 out of 50000000 steps (27%).
[19:15:05] Completed  14000000 out of 50000000 steps (28%).
[19:23:59] Completed  14500000 out of 50000000 steps (29%).
[19:32:52] Completed  15000000 out of 50000000 steps (30%).
[19:41:47] Completed  15500000 out of 50000000 steps (31%).
[19:50:42] Completed  16000000 out of 50000000 steps (32%).
[19:59:38] Completed  16500000 out of 50000000 steps (33%).
[20:08:34] Completed  17000000 out of 50000000 steps (34%).
[20:17:32] Completed  17500000 out of 50000000 steps (35%).
[20:26:27] Completed  18000000 out of 50000000 steps (36%).
[20:35:23] Completed  18500000 out of 50000000 steps (37%).
[20:44:17] Completed  19000000 out of 50000000 steps (38%).
[20:53:12] Completed  19500000 out of 50000000 steps (39%).
[21:02:07] Completed  20000000 out of 50000000 steps (40%).
[21:05:26] - Autosending finished units... [December 1 21:05:26 UTC]
[21:05:26] Trying to send all finished work units
[21:05:26] + No unsent completed units remaining.
[21:05:26] - Autosend completed
[21:11:04] Completed  20500000 out of 50000000 steps (41%).
[21:20:01] Completed  21000000 out of 50000000 steps (42%).
[21:28:58] Completed  21500000 out of 50000000 steps (43%).
[21:37:55] Completed  22000000 out of 50000000 steps (44%).
[21:47:01] Completed  22500000 out of 50000000 steps (45%).
[21:56:00] Completed  23000000 out of 50000000 steps (46%).
[22:04:56] Completed  23500000 out of 50000000 steps (47%).
[22:13:53] Completed  24000000 out of 50000000 steps (48%).
[22:22:51] Completed  24500000 out of 50000000 steps (49%).
[22:31:49] Completed  25000000 out of 50000000 steps (50%).
[22:40:47] Completed  25500000 out of 50000000 steps (51%).
[22:49:45] Completed  26000000 out of 50000000 steps (52%).
[22:58:42] Completed  26500000 out of 50000000 steps (53%).
[23:07:40] Completed  27000000 out of 50000000 steps (54%).
[23:16:38] Completed  27500000 out of 50000000 steps (55%).
[23:25:35] Completed  28000000 out of 50000000 steps (56%).
[23:34:32] Completed  28500000 out of 50000000 steps (57%).
[23:43:28] Completed  29000000 out of 50000000 steps (58%).
[23:52:23] Completed  29500000 out of 50000000 steps (59%).
[00:01:17] Completed  30000000 out of 50000000 steps (60%).
[00:10:13] Completed  30500000 out of 50000000 steps (61%).
[00:19:10] Completed  31000000 out of 50000000 steps (62%).
[00:28:05] Completed  31500000 out of 50000000 steps (63%).
[00:37:00] Completed  32000000 out of 50000000 steps (64%).
[00:45:54] Completed  32499999 out of 50000000 steps (65%).
[00:54:49] Completed  32999999 out of 50000000 steps (66%).
[01:03:44] Completed  33499999 out of 50000000 steps (67%).
[01:12:39] Completed  33999999 out of 50000000 steps (68%).
[01:21:34] Completed  34499999 out of 50000000 steps (69%).
[01:30:28] Completed  34999999 out of 50000000 steps (70%).
[01:39:21] Completed  35499999 out of 50000000 steps (71%).
[01:48:16] Completed  35999999 out of 50000000 steps (72%).
[01:57:11] Completed  36499999 out of 50000000 steps (73%).
[02:06:04] Completed  36999999 out of 50000000 steps (74%).
[02:14:58] Completed  37499999 out of 50000000 steps (75%).
[02:23:53] Completed  37999999 out of 50000000 steps (76%).
[02:32:52] Completed  38499999 out of 50000000 steps (77%).
[02:41:50] Completed  38999999 out of 50000000 steps (78%).
[02:50:49] Completed  39499999 out of 50000000 steps (79%).
[02:59:44] Completed  39999999 out of 50000000 steps (80%).
[03:05:26] - Autosending finished units... [December 2 03:05:26 UTC]
[03:05:26] Trying to send all finished work units
[03:05:26] + No unsent completed units remaining.
[03:05:26] - Autosend completed
[03:08:38] Completed  40499999 out of 50000000 steps (81%).
[03:17:33] Completed  40999999 out of 50000000 steps (82%).
[03:26:27] Completed  41499999 out of 50000000 steps (83%).
[03:35:21] Completed  41999999 out of 50000000 steps (84%).
[03:44:15] Completed  42499999 out of 50000000 steps (85%).
[03:53:09] Completed  42999999 out of 50000000 steps (86%).
[04:02:03] Completed  43499999 out of 50000000 steps (87%).
[04:10:56] Completed  43999999 out of 50000000 steps (88%).
[04:19:50] Completed  44499999 out of 50000000 steps (89%).
[04:28:44] Completed  44999999 out of 50000000 steps (90%).
[04:37:38] Completed  45499999 out of 50000000 steps (91%).
[04:46:31] Completed  45999999 out of 50000000 steps (92%).
[04:55:25] Completed  46499999 out of 50000000 steps (93%).
[05:04:19] Completed  46999999 out of 50000000 steps (94%).
[05:13:13] Completed  47499999 out of 50000000 steps (95%).
[05:22:07] Completed  47999999 out of 50000000 steps (96%).
[05:31:00] Completed  48499999 out of 50000000 steps (97%).
[05:39:54] Completed  48999999 out of 50000000 steps (98%).
[05:48:48] Completed  49499999 out of 50000000 steps (99%).
[05:57:42] Completed  49999999 out of 50000000 steps (100%).
[05:57:42] Finished fah_main
[05:57:42] 
[05:57:42] Successful run
[05:57:42] DynamicWrapper: Finished Work Unit: sleep=10000
[05:57:52] Reserved 8208260 bytes for xtc file; Cosm status=0
[05:57:52] Allocated 8208260 bytes for xtc file
[05:57:52] - Reading up to 8208260 from "work/wudata_01.xtc": Read 8208260
[05:57:52] Read 8208260 bytes from xtc file; available packet space=778222204
[05:57:52] xtc file hash check passed.
[05:57:52] Reserved 258600 258600 778222204 bytes for arc file=<work/wudata_01.trr> Cosm status=0
[05:57:52] Allocated 258600 bytes for arc file
[05:57:52] - Reading up to 258600 from "work/wudata_01.trr": Read 258600
[05:57:52] Read 258600 bytes from arc file; available packet space=777963604
[05:57:52] trr file hash check passed.
[05:57:52] Allocated 544 bytes for edr file
[05:57:52] Read bedfile
[05:57:52] edr file hash check passed.
[05:57:52] Allocated 121123 bytes for logfile
[05:57:52] Read logfile
[05:57:52] GuardedRun: success in DynamicWrapper
[05:57:52] GuardedRun: done
[05:57:52] Run: GuardedRun completed.
[05:57:54] + Opened results file
[05:57:54] - Writing 8589039 bytes of core data to disk...
[05:57:57] Done: 8588527 -> 8428005 (compressed to 98.1 percent)
[05:57:57]   ... Done.
[05:57:57] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[05:57:57] Shutting down core 
[05:57:57] 
[05:57:57] Folding@home Core Shutdown: FINISHED_UNIT
[05:58:00] CoreStatus = 64 (100)
[05:58:00] Unit 1 finished with 97 percent of time to deadline remaining.
[05:58:00] Updated performance fraction: 0.965566
[05:58:00] Sending work to server
[05:58:00] Project: 6811 (Run 0, Clone 269, Gen 19)
[05:58:00] - Read packet limit of 540015616... Set to 524286976.


[05:58:00] + Attempting to send results [December 2 05:58:00 UTC]
[05:58:00] - Reading file work/wuresults_01.dat from core
[05:58:00]   (Read 8428517 bytes from disk)
[05:58:00] Gpu type=3 species=20.
[05:58:00] Connecting to http://171.64.65.64:8080/
[06:00:20] Posted data.
[06:00:20] Initial: 0000; - Uploaded at ~58 kB/s
[06:00:20] - Averaged speed for that direction ~58 kB/s
[06:00:20] + Results successfully sent
[06:00:20] Thank you for your contribution to Folding@Home.
[06:00:20] + Number of Units Completed: 149

[06:00:24] Trying to send all finished work units
[06:00:24] + No unsent completed units remaining.
[06:00:24] + -oneunit flag given and have now finished a unit. Exiting.***** Got a SIGTERM signal (2)
[06:00:24] Killing all core threads

Folding@Home Client Shutdown.
ei57
Posts: 64
Joined: Thu Jun 12, 2008 10:23 am

Re: No points in 9pm and 12am updates for gpu3?

Post by ei57 »

Problem is related to server 171.64.65.64 and EOC updates 12.01, 9am, 12.02, 12 am and partly 3pm. Fahlogs look normal, no down time, but points are not credited.

[03:01:42] Project: 6800 (Run 40, Clone 1, Gen 33)


[03:01:42] + Attempting to send results [December 2 03:01:42 UTC]
[03:01:42] - Reading file work/wuresults_01.dat from core
[03:01:42] (Read 2486687 bytes from disk)
[03:01:42] Gpu type=3 species=30.
[03:01:42] Connecting to http://171.64.65.64:8080/
[03:02:06] Posted data.
[03:02:06] Initial: 0000; - Uploaded at ~101 kB/s
[03:02:06] - Averaged speed for that direction ~121 kB/s
[03:02:06] + Results successfully sent
cdb
Posts: 26
Joined: Sat Feb 02, 2008 8:56 pm

Re: No points in 9pm and 12am updates for gpu3?

Post by cdb »

I have missing credits from the same time and server too. Here's part of my log file from today from one of my GTX460s (I'm running 2) I've cut out the 2%-99% bits to shorten the file. Mine were all 6800WUs

Code: Select all

[00:13:49] Gpu type=3 species=21 driver=3010.
[00:13:49] - Connecting to assignment server
[00:13:49] - Successful: assigned to (171.64.65.64).
[00:13:49] + News From Folding@Home: Welcome to Folding@Home
[00:13:50] Loaded queue successfully.
[00:13:50] Gpu type=3 species=21 driver=3010.
[00:13:51] + Closed connections
[00:13:51] 
[00:13:51] + Processing work unit
[00:13:51] Core required: FahCore_15.exe
[00:13:51] Core found.
[00:13:51] Working on queue slot 07 [December 1 00:13:51 UTC]
[00:13:51] + Working ...
[00:13:51] 
[00:13:51] *------------------------------*
[00:13:51] Folding@Home GPU Core
[00:13:51] Version 2.14 (Thu Nov 11 10:05:53 PST 2010)
[00:13:51] 
[00:13:51] Build host: SimbiosNvdWin7
[00:13:51] Board Type: NVIDIA/CUDA
[00:13:51] Core      : x=15
[00:13:51]  Window's signal control handler registered.
[00:13:51] Preparing to commence simulation
[00:13:51] - Looking at optimizations...
[00:13:51] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp
[00:13:51] - Created dyn
[00:13:51] - Files status OK
[00:13:51] sizeof(CORE_PACKET_HDR) = 512 file=<>
[00:13:51] - Expanded 43486 -> 169787 (decompressed 390.4 percent)
[00:13:51] Called DecompressByteArray: compressed_data_size=43486 data_size=169787, decompressed_data_size=169787 diff=0
[00:13:51] - Digital signature verified
[00:13:51] 
[00:13:51] Project: 6800 (Run 1385, Clone 1, Gen 35)
[00:13:51] 
[00:13:51] Assembly optimizations on if available.
[00:13:51] Entering M.D.
[00:13:53] Tpr hash work/wudata_07.tpr:  1412961509 3978177418 3298929591 749263366 1068309395
[00:13:53] Working on PEPTIDE (1-42)
[00:13:53] Client config found, loading data.
[00:13:54] Starting GUI Server
[00:15:44] Completed    500000 out of 50000000 steps (1%).

[03:13:43] Completed  49999999 out of 50000000 steps (100%).
[03:13:43] Finished fah_main
[03:13:43] 
[03:13:43] Successful run
[03:13:43] DynamicWrapper: Finished Work Unit: sleep=10000
[03:13:53] Reserved 2443024 bytes for xtc file; Cosm status=0
[03:13:53] Allocated 2443024 bytes for xtc file
[03:13:53] - Reading up to 2443024 from "work/wudata_07.xtc": Read 2443024
[03:13:53] Read 2443024 bytes from xtc file; available packet space=783987440
[03:13:53] xtc file hash check passed.
[03:13:53] Reserved 75840 75840 783987440 bytes for arc file=<work/wudata_07.trr> Cosm status=0
[03:13:53] Allocated 75840 bytes for arc file
[03:13:53] - Reading up to 75840 from "work/wudata_07.trr": Read 75840
[03:13:53] Read 75840 bytes from arc file; available packet space=783911600
[03:13:53] trr file hash check passed.
[03:13:53] Allocated 544 bytes for edr file
[03:13:53] Read bedfile
[03:13:53] edr file hash check passed.
[03:13:53] Allocated 121132 bytes for logfile
[03:13:53] Read logfile
[03:13:53] GuardedRun: success in DynamicWrapper
[03:13:53] GuardedRun: done
[03:13:53] Run: GuardedRun completed.
[03:13:57] + Opened results file
[03:13:57] - Writing 2641052 bytes of core data to disk...
[03:13:57] Done: 2640540 -> 2481975 (compressed to 93.9 percent)
[03:13:57]   ... Done.
[03:13:57] DeleteFrameFiles: successfully deleted file=work/wudata_07.ckp
[03:13:58] Shutting down core 
[03:13:58] 
[03:13:58] Folding@home Core Shutdown: FINISHED_UNIT
[03:14:01] CoreStatus = 64 (100)
[03:14:01] Sending work to server
[03:14:01] Project: 6800 (Run 1385, Clone 1, Gen 35)


[03:14:01] + Attempting to send results [December 1 03:14:01 UTC]
[03:14:01] Gpu type=3 species=21 driver=3010.
[03:14:21] + Results successfully sent
[03:14:21] Thank you for your contribution to Folding@Home.
[03:14:21] + Number of Units Completed: 2358

[03:14:25] - Preparing to get new work unit...
[03:14:25] Cleaning up work directory
[03:14:25] + Attempting to get work packet
[03:14:25] Passkey found
[03:14:25] Gpu type=3 species=21 driver=3010.
[03:14:25] - Connecting to assignment server
[03:14:26] - Successful: assigned to (171.64.65.64).
[03:14:26] + News From Folding@Home: Welcome to Folding@Home
[03:14:26] Loaded queue successfully.
[03:14:26] Gpu type=3 species=21 driver=3010.
[03:14:28] + Closed connections
[03:14:28] 
[03:14:28] + Processing work unit
[03:14:28] Core required: FahCore_15.exe
[03:14:28] Core found.
[03:14:28] Working on queue slot 08 [December 1 03:14:28 UTC]
[03:14:28] + Working ...
[03:14:28] 
[03:14:28] *------------------------------*
[03:14:28] Folding@Home GPU Core
[03:14:28] Version 2.14 (Thu Nov 11 10:05:53 PST 2010)
[03:14:28] 
[03:14:28] Build host: SimbiosNvdWin7
[03:14:28] Board Type: NVIDIA/CUDA
[03:14:28] Core      : x=15
[03:14:28]  Window's signal control handler registered.
[03:14:28] Preparing to commence simulation
[03:14:28] - Looking at optimizations...
[03:14:28] DeleteFrameFiles: successfully deleted file=work/wudata_08.ckp
[03:14:28] - Created dyn
[03:14:28] - Files status OK
[03:14:28] sizeof(CORE_PACKET_HDR) = 512 file=<>
[03:14:28] - Expanded 43443 -> 169787 (decompressed 390.8 percent)
[03:14:28] Called DecompressByteArray: compressed_data_size=43443 data_size=169787, decompressed_data_size=169787 diff=0
[03:14:28] - Digital signature verified
[03:14:28] 
[03:14:28] Project: 6800 (Run 1385, Clone 1, Gen 36)
[03:14:28] 
[03:14:28] Assembly optimizations on if available.
[03:14:28] Entering M.D.
[03:14:30] Tpr hash work/wudata_08.tpr:  994759725 3079209485 2262876080 2761896200 1891225003
[03:14:30] Working on PEPTIDE (1-42)
[03:14:30] Client config found, loading data.
[03:14:31] Starting GUI Server
[03:16:11] Completed    500000 out of 50000000 steps (1%).

[06:01:40] Completed  49999999 out of 50000000 steps (100%).
[06:01:40] Finished fah_main
[06:01:40] 
[06:01:40] Successful run
[06:01:40] DynamicWrapper: Finished Work Unit: sleep=10000
[06:01:50] Reserved 2443208 bytes for xtc file; Cosm status=0
[06:01:50] Allocated 2443208 bytes for xtc file
[06:01:50] - Reading up to 2443208 from "work/wudata_08.xtc": Read 2443208
[06:01:50] Read 2443208 bytes from xtc file; available packet space=783987256
[06:01:51] xtc file hash check passed.
[06:01:51] Reserved 75840 75840 783987256 bytes for arc file=<work/wudata_08.trr> Cosm status=0
[06:01:51] Allocated 75840 bytes for arc file
[06:01:51] - Reading up to 75840 from "work/wudata_08.trr": Read 75840
[06:01:51] Read 75840 bytes from arc file; available packet space=783911416
[06:01:51] trr file hash check passed.
[06:01:51] Allocated 544 bytes for edr file
[06:01:51] Read bedfile
[06:01:51] edr file hash check passed.
[06:01:51] Allocated 121133 bytes for logfile
[06:01:51] Read logfile
[06:01:51] GuardedRun: success in DynamicWrapper
[06:01:51] GuardedRun: done
[06:01:51] Run: GuardedRun completed.
[06:01:52] + Opened results file
[06:01:52] - Writing 2641237 bytes of core data to disk...
[06:01:53] Done: 2640725 -> 2481847 (compressed to 93.9 percent)
[06:01:53]   ... Done.
[06:01:53] DeleteFrameFiles: successfully deleted file=work/wudata_08.ckp
[06:01:53] Shutting down core 
[06:01:53] 
[06:01:53] Folding@home Core Shutdown: FINISHED_UNIT
[06:01:57] CoreStatus = 64 (100)
[06:01:57] Sending work to server
[06:01:57] Project: 6800 (Run 1385, Clone 1, Gen 36)


[06:01:57] + Attempting to send results [December 1 06:01:57 UTC]
[06:01:57] Gpu type=3 species=21 driver=3010.
[06:02:11] + Results successfully sent
[06:02:11] Thank you for your contribution to Folding@Home.
[06:02:11] + Number of Units Completed: 2359

[06:02:15] - Preparing to get new work unit...
[06:02:15] Cleaning up work directory
[06:02:15] + Attempting to get work packet
[06:02:15] Passkey found
[06:02:15] Gpu type=3 species=21 driver=3010.
[06:02:15] - Connecting to assignment server
[06:02:17] - Successful: assigned to (171.64.65.64).
[06:02:17] + News From Folding@Home: Welcome to Folding@Home
[06:02:17] Loaded queue successfully.
[06:02:17] Gpu type=3 species=21 driver=3010.
[06:02:18] + Closed connections
[06:02:18] 
[06:02:18] + Processing work unit
[06:02:18] Core required: FahCore_15.exe
[06:02:18] Core found.
[06:02:18] Working on queue slot 09 [December 1 06:02:18 UTC]
[06:02:18] + Working ...
[06:02:18] 
[06:02:18] *------------------------------*
[06:02:18] Folding@Home GPU Core
[06:02:18] Version 2.14 (Thu Nov 11 10:05:53 PST 2010)
[06:02:18] 
[06:02:18] Build host: SimbiosNvdWin7
[06:02:18] Board Type: NVIDIA/CUDA
[06:02:18] Core      : x=15
[06:02:18]  Window's signal control handler registered.
[06:02:18] Preparing to commence simulation
[06:02:18] - Looking at optimizations...
[06:02:18] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp
[06:02:18] - Created dyn
[06:02:18] - Files status OK
[06:02:18] sizeof(CORE_PACKET_HDR) = 512 file=<>
[06:02:18] - Expanded 43338 -> 169787 (decompressed 391.7 percent)
[06:02:18] Called DecompressByteArray: compressed_data_size=43338 data_size=169787, decompressed_data_size=169787 diff=0
[06:02:18] - Digital signature verified
[06:02:18] 
[06:02:18] Project: 6800 (Run 1385, Clone 1, Gen 37)
[06:02:18] 
[06:02:18] Assembly optimizations on if available.
[06:02:18] Entering M.D.
[06:02:20] Tpr hash work/wudata_09.tpr:  3287613831 1735269424 3086758748 2503026943 690071339
[06:02:20] Working on PEPTIDE (1-42)
[06:02:20] Client config found, loading data.
[06:02:21] Starting GUI Server
[06:04:01] Completed    500000 out of 50000000 steps (1%).

[08:49:15] Completed  49999999 out of 50000000 steps (100%).
[08:49:15] Finished fah_main
[08:49:15] 
[08:49:15] Successful run
[08:49:15] DynamicWrapper: Finished Work Unit: sleep=10000
[08:49:25] Reserved 2442568 bytes for xtc file; Cosm status=0
[08:49:25] Allocated 2442568 bytes for xtc file
[08:49:25] - Reading up to 2442568 from "work/wudata_09.xtc": Read 2442568
[08:49:25] Read 2442568 bytes from xtc file; available packet space=783987896
[08:49:25] xtc file hash check passed.
[08:49:25] Reserved 75840 75840 783987896 bytes for arc file=<work/wudata_09.trr> Cosm status=0
[08:49:25] Allocated 75840 bytes for arc file
[08:49:25] - Reading up to 75840 from "work/wudata_09.trr": Read 75840
[08:49:25] Read 75840 bytes from arc file; available packet space=783912056
[08:49:25] trr file hash check passed.
[08:49:25] Allocated 544 bytes for edr file
[08:49:25] Read bedfile
[08:49:25] edr file hash check passed.
[08:49:25] Allocated 121133 bytes for logfile
[08:49:25] Read logfile
[08:49:25] GuardedRun: success in DynamicWrapper
[08:49:25] GuardedRun: done
[08:49:25] Run: GuardedRun completed.
[08:49:28] + Opened results file
[08:49:28] - Writing 2640597 bytes of core data to disk...
[08:49:29] Done: 2640085 -> 2481705 (compressed to 94.0 percent)
[08:49:29]   ... Done.
[08:49:29] DeleteFrameFiles: successfully deleted file=work/wudata_09.ckp
[08:49:29] Shutting down core 
[08:49:29] 
[08:49:29] Folding@home Core Shutdown: FINISHED_UNIT
[08:49:33] CoreStatus = 64 (100)
[08:49:33] Sending work to server
[08:49:33] Project: 6800 (Run 1385, Clone 1, Gen 37)


[08:49:33] + Attempting to send results [December 1 08:49:33 UTC]
[08:49:33] Gpu type=3 species=21 driver=3010.
[08:49:46] + Results successfully sent
[08:49:46] Thank you for your contribution to Folding@Home.
[08:49:46] + Number of Units Completed: 2360

[08:49:50] - Preparing to get new work unit...
[08:49:50] Cleaning up work directory
[08:49:50] + Attempting to get work packet
[08:49:50] Passkey found
[08:49:50] Gpu type=3 species=21 driver=3010.
[08:49:50] - Connecting to assignment server
[08:49:51] - Successful: assigned to (171.64.65.64).
[08:49:51] + News From Folding@Home: Welcome to Folding@Home
[08:49:51] Loaded queue successfully.
[08:49:51] Gpu type=3 species=21 driver=3010.
[08:49:53] + Closed connections
[08:49:53] 
[08:49:53] + Processing work unit
[08:49:53] Core required: FahCore_15.exe
[08:49:53] Core found.
[08:49:53] Working on queue slot 00 [December 1 08:49:53 UTC]
[08:49:53] + Working ...
[08:49:53] 
[08:49:53] *------------------------------*
[08:49:53] Folding@Home GPU Core
[08:49:53] Version 2.14 (Thu Nov 11 10:05:53 PST 2010)
[08:49:53] 
[08:49:53] Build host: SimbiosNvdWin7
[08:49:53] Board Type: NVIDIA/CUDA
[08:49:53] Core      : x=15
[08:49:53]  Window's signal control handler registered.
[08:49:53] Preparing to commence simulation
[08:49:53] - Looking at optimizations...
[08:49:53] DeleteFrameFiles: successfully deleted file=work/wudata_00.ckp
[08:49:53] - Created dyn
[08:49:53] - Files status OK
[08:49:53] sizeof(CORE_PACKET_HDR) = 512 file=<>
[08:49:53] - Expanded 43386 -> 169787 (decompressed 391.3 percent)
[08:49:53] Called DecompressByteArray: compressed_data_size=43386 data_size=169787, decompressed_data_size=169787 diff=0
[08:49:53] - Digital signature verified
[08:49:53] 
[08:49:53] Project: 6800 (Run 1385, Clone 1, Gen 38)
[08:49:53] 
[08:49:53] Assembly optimizations on if available.
[08:49:53] Entering M.D.
[08:49:55] Tpr hash work/wudata_00.tpr:  1868763019 3596479663 3084493324 2111199588 967929369
[08:49:55] Working on PEPTIDE (1-42)
[08:49:55] Client config found, loading data.
[08:49:55] Starting GUI Server
[08:51:36] Completed    500000 out of 50000000 steps (1%).

[11:36:58] Completed  49999999 out of 50000000 steps (100%).
[11:36:58] Finished fah_main
[11:36:58] 
[11:36:58] Successful run
[11:36:58] DynamicWrapper: Finished Work Unit: sleep=10000
[11:37:08] Reserved 2442628 bytes for xtc file; Cosm status=0
[11:37:08] Allocated 2442628 bytes for xtc file
[11:37:08] - Reading up to 2442628 from "work/wudata_00.xtc": Read 2442628
[11:37:08] Read 2442628 bytes from xtc file; available packet space=783987836
[11:37:08] xtc file hash check passed.
[11:37:08] Reserved 75840 75840 783987836 bytes for arc file=<work/wudata_00.trr> Cosm status=0
[11:37:08] Allocated 75840 bytes for arc file
[11:37:08] - Reading up to 75840 from "work/wudata_00.trr": Read 75840
[11:37:08] Read 75840 bytes from arc file; available packet space=783911996
[11:37:08] trr file hash check passed.
[11:37:08] Allocated 544 bytes for edr file
[11:37:08] Read bedfile
[11:37:08] edr file hash check passed.
[11:37:08] Allocated 121132 bytes for logfile
[11:37:08] Read logfile
[11:37:08] GuardedRun: success in DynamicWrapper
[11:37:08] GuardedRun: done
[11:37:08] Run: GuardedRun completed.
[11:37:11] + Opened results file
[11:37:11] - Writing 2640656 bytes of core data to disk...
[11:37:12] Done: 2640144 -> 2481365 (compressed to 93.9 percent)
[11:37:12]   ... Done.
[11:37:12] DeleteFrameFiles: successfully deleted file=work/wudata_00.ckp
[11:37:12] Shutting down core 
[11:37:12] 
[11:37:12] Folding@home Core Shutdown: FINISHED_UNIT
[11:37:15] CoreStatus = 64 (100)
[11:37:15] Sending work to server
[11:37:15] Project: 6800 (Run 1385, Clone 1, Gen 38)


[11:37:15] + Attempting to send results [December 1 11:37:15 UTC]
[11:37:15] Gpu type=3 species=21 driver=3010.
[11:37:34] + Results successfully sent
[11:37:34] Thank you for your contribution to Folding@Home.
[11:37:34] + Number of Units Completed: 2361

[11:37:38] - Preparing to get new work unit...
[11:37:38] Cleaning up work directory
[11:37:38] + Attempting to get work packet
[11:37:38] Passkey found
[11:37:38] Gpu type=3 species=21 driver=3010.
[11:37:38] - Connecting to assignment server
[11:37:39] - Successful: assigned to (171.64.65.64).
[11:37:39] + News From Folding@Home: Welcome to Folding@Home
[11:37:39] Loaded queue successfully.
[11:37:39] Gpu type=3 species=21 driver=3010.
[11:37:40] + Closed connections
[11:37:40] 
[11:37:40] + Processing work unit
[11:37:40] Core required: FahCore_15.exe
[11:37:40] Core found.
[11:37:40] Working on queue slot 01 [December 1 11:37:40 UTC]
[11:37:40] + Working ...
[11:37:41] 
[11:37:41] *------------------------------*
[11:37:41] Folding@Home GPU Core
[11:37:41] Version 2.14 (Thu Nov 11 10:05:53 PST 2010)
[11:37:41] 
[11:37:41] Build host: SimbiosNvdWin7
[11:37:41] Board Type: NVIDIA/CUDA
[11:37:41] Core      : x=15
[11:37:41]  Window's signal control handler registered.
[11:37:41] Preparing to commence simulation
[11:37:41] - Looking at optimizations...
[11:37:41] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[11:37:41] - Created dyn
[11:37:41] - Files status OK
[11:37:41] sizeof(CORE_PACKET_HDR) = 512 file=<>
[11:37:41] - Expanded 43314 -> 169787 (decompressed 391.9 percent)
[11:37:41] Called DecompressByteArray: compressed_data_size=43314 data_size=169787, decompressed_data_size=169787 diff=0
[11:37:41] - Digital signature verified
[11:37:41] 
[11:37:41] Project: 6800 (Run 1385, Clone 1, Gen 39)
[11:37:41] 
[11:37:41] Assembly optimizations on if available.
[11:37:41] Entering M.D.
[11:37:43] Tpr hash work/wudata_01.tpr:  1490114817 1852538686 3530801251 2309251572 4019325696
[11:37:43] Working on PEPTIDE (1-42)
[11:37:43] Client config found, loading data.
[11:37:43] Starting GUI Server
[11:39:24] Completed    500000 out of 50000000 steps (1%).

[14:24:41] Completed  49999999 out of 50000000 steps (100%).
[14:24:41] Finished fah_main
[14:24:41] 
[14:24:41] Successful run
[14:24:41] DynamicWrapper: Finished Work Unit: sleep=10000
[14:24:51] Reserved 2440152 bytes for xtc file; Cosm status=0
[14:24:51] Allocated 2440152 bytes for xtc file
[14:24:51] - Reading up to 2440152 from "work/wudata_01.xtc": Read 2440152
[14:24:51] Read 2440152 bytes from xtc file; available packet space=783990312
[14:24:51] xtc file hash check passed.
[14:24:51] Reserved 75840 75840 783990312 bytes for arc file=<work/wudata_01.trr> Cosm status=0
[14:24:51] Allocated 75840 bytes for arc file
[14:24:51] - Reading up to 75840 from "work/wudata_01.trr": Read 75840
[14:24:51] Read 75840 bytes from arc file; available packet space=783914472
[14:24:51] trr file hash check passed.
[14:24:51] Allocated 544 bytes for edr file
[14:24:51] Read bedfile
[14:24:51] edr file hash check passed.
[14:24:51] Allocated 121133 bytes for logfile
[14:24:51] Read logfile
[14:24:51] GuardedRun: success in DynamicWrapper
[14:24:51] GuardedRun: done
[14:24:51] Run: GuardedRun completed.
[14:24:51] + Opened results file
[14:24:51] - Writing 2638181 bytes of core data to disk...
[14:24:52] Done: 2637669 -> 2478823 (compressed to 93.9 percent)
[14:24:52]   ... Done.
[14:24:52] DeleteFrameFiles: successfully deleted file=work/wudata_01.ckp
[14:24:52] Shutting down core 
[14:24:52] 
[14:24:52] Folding@home Core Shutdown: FINISHED_UNIT
[14:24:55] CoreStatus = 64 (100)
[14:24:55] Sending work to server
[14:24:55] Project: 6800 (Run 1385, Clone 1, Gen 39)


[14:24:55] + Attempting to send results [December 1 14:24:55 UTC]
[14:24:55] Gpu type=3 species=21 driver=3010.
[14:25:15] + Results successfully sent
[14:25:15] Thank you for your contribution to Folding@Home.
[14:25:15] + Number of Units Completed: 2362

[14:25:19] - Preparing to get new work unit...
[14:25:19] Cleaning up work directory
[14:25:19] + Attempting to get work packet
[14:25:19] Passkey found
[14:25:19] Gpu type=3 species=21 driver=3010.
[14:25:19] - Connecting to assignment server
[14:25:20] - Successful: assigned to (171.64.65.64).
[14:25:20] + News From Folding@Home: Welcome to Folding@Home
[14:25:21] Loaded queue successfully.
[14:25:21] Gpu type=3 species=21 driver=3010.
[14:25:22] + Closed connections
[14:25:22] 
[14:25:22] + Processing work unit
[14:25:22] Core required: FahCore_15.exe
[14:25:22] Core found.
[14:25:22] Working on queue slot 02 [December 1 14:25:22 UTC]
[14:25:22] + Working ...
[14:25:22] 
[14:25:22] *------------------------------*
[14:25:22] Folding@Home GPU Core
[14:25:22] Version 2.14 (Thu Nov 11 10:05:53 PST 2010)
[14:25:22] 
[14:25:22] Build host: SimbiosNvdWin7
[14:25:22] Board Type: NVIDIA/CUDA
[14:25:22] Core      : x=15
[14:25:22]  Window's signal control handler registered.
[14:25:22] Preparing to commence simulation
[14:25:22] - Looking at optimizations...
[14:25:22] DeleteFrameFiles: successfully deleted file=work/wudata_02.ckp
[14:25:22] - Created dyn
[14:25:22] - Files status OK
[14:25:22] sizeof(CORE_PACKET_HDR) = 512 file=<>
[14:25:22] - Expanded 43366 -> 169787 (decompressed 391.5 percent)
[14:25:22] Called DecompressByteArray: compressed_data_size=43366 data_size=169787, decompressed_data_size=169787 diff=0
[14:25:22] - Digital signature verified
[14:25:22] 
[14:25:22] Project: 6800 (Run 3222, Clone 1, Gen 15)
[14:25:22] 
[14:25:22] Assembly optimizations on if available.
[14:25:22] Entering M.D.
[14:25:24] Tpr hash work/wudata_02.tpr:  2920750696 3039269622 2442547049 3481073928 1641954881
[14:25:24] Working on PEPTIDE (1-42)
[14:25:24] Client config found, loading data.
[14:25:25] Starting GUI Server
[14:27:05] Completed    500000 out of 50000000 steps (1%).
[14:28:45] Completed   1000000 out of 50000000 steps (2%).
VijayPande
Pande Group Member
Posts: 2058
Joined: Fri Nov 30, 2007 6:25 am
Location: Stanford

Re: No points in 9pm and 12am updates for gpu3?

Post by VijayPande »

Thanks. Upon further investigation, I think there was an issue with a particular physical server (handling vspg2, vspg2v, vspg2v2), but other servers are unaffected. We're taking a look to see what to do from here.
Prof. Vijay Pande, PhD
Departments of Chemistry, Structural Biology, and Computer Science
Chair, Biophysics
Director, Folding@home Distributed Computing Project
Stanford University
VijayPande
Pande Group Member
Posts: 2058
Joined: Fri Nov 30, 2007 6:25 am
Location: Stanford

Re: No points in 9pm and 12am updates for gpu3?

Post by VijayPande »

PS There indeed was a problem on Dec 1 from 3pm to 11:30pm . After that, the issue was resolved. We're looking to see what sort of recredit is possible. This looks like one of the cases in which a recredit may not be possible (no records to do the recredit), but we're pushing to see what we can do.
Prof. Vijay Pande, PhD
Departments of Chemistry, Structural Biology, and Computer Science
Chair, Biophysics
Director, Folding@home Distributed Computing Project
Stanford University
KRAM
Posts: 17
Joined: Sun Nov 28, 2010 4:31 pm

Re: No points in 9pm and 12am updates for gpu3?

Post by KRAM »

What exactly do you need for info to look into possible recredit? I already took a 20k beating on my -bigadv last Sunday with server issues and now it looks like another 25k to 30k points loss again this week with not getting any points for my gpu3 clients. I run seven 400 series cards and they turned in several wu's with no credit.

Would like to get this corrected if possible. Thank you.
cdb
Posts: 26
Joined: Sat Feb 02, 2008 8:56 pm

Re: No points in 9pm and 12am updates for gpu3?

Post by cdb »

VijayPande wrote: We're looking to see what sort of recredit is possible. This looks like one of the cases in which a recredit may not be possible (no records to do the recredit), but we're pushing to see what we can do.

Doesn't the fahlog count as a record? it's not like we can make it up is it?
7im
Posts: 10189
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: No points in 9pm and 12am updates for gpu3?

Post by 7im »

Fahlogs are simple text files. Easy to duplicate. Sorry.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
CadBane
Posts: 22
Joined: Wed May 26, 2010 6:49 pm

Re: No points in 9pm and 12am updates for gpu3?

Post by CadBane »

For the past couple days I have not received credit for GPU 3 WUs. GPU 2 and SMP work fine. This is not effecting me at this very moment because it is going in for RMA due to inability to run 6811s. Every WU runs fine except the 6811s even at stock. So I sent it in because its only a matter of time before those can be had without the advmethods flag.
bruce
Posts: 20910
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: No points in 9pm and 12am updates for gpu3?

Post by bruce »

CadBane wrote:For the past couple days I have not received credit for GPU 3 WUs. GPU 2 and SMP work fine. This is not effecting me at this very moment because it is going in for RMA due to inability to run 6811s. Every WU runs fine except the 6811s even at stock. So I sent it in because its only a matter of time before those can be had without the advmethods flag.
Which GPU3 WUs have you completed for which you did not get credit and when were they uploaded?

Are they all associated with a particular Work Server?
CadBane
Posts: 22
Joined: Wed May 26, 2010 6:49 pm

Re: No points in 9pm and 12am updates for gpu3?

Post by CadBane »

I would have to look that up. I am not in front of the box at the moment. And they should all be 6800s as the 6811 were unfoldable on the card. Before I sent the card out for RMA the 275 was capable of putting out 2 WUs per EOC update but as its driving both displays its ability is halved till i get back to unplug one of them. I will look up the info when I get back.
Post Reply