Folding Forum

Did you add it under the Passwordless IP restriction section too?

On the second computer you need to have configured it for remote access. If you haven't done that yet, on Advanced Control, Configure, Remote Access, under the section called Passwordless IP Address Restriction, Allow - 192.168.0.0/24 Then save it and restart the second computer. Then in HFM select...

I tried creating a firewall rule blocking the work server, hoping to force to the collection server, but that didn't work either. Still stuck. 15:46:09:WU02:FS01:Sending unit results: id:02 state:SEND error:NO_ERROR project:16435 run:433 clone:0 gen:6 core:0x22 unit:0x0000000903854c135e9a4efb584bc49...

Sadly the two most interesting GPUs to me are still missing. Would love to see data for RTX 2060 and RTX 2070

That has been seen by some after a driver crash and reset, the clocks on a GPU get "stuck" on a lower speed and do not g back to more normal speeds. Sometimes a reboot has been needed to reset thing, others just stopping and starting. Might be th problem here, or something similar. I noti...

On my 3950x I had to do a bios upgrade. It readjusted the voltages on auto overclock. After this, I saw a 10c drop on air. The $75 Closed loop water-cooling system from cooler-master really works wonders in getting the temps down even further, allowing it to keep boost speeds much longer! This one?...

I played around a bit with my 3800x today. Set voltage to 1.25 and turned on all core manual clock to 4.2 Ghz. That's running about 150Mhz all core over stock and 5C cooler (78C now). So far it's perfectly stable. I tried everything I could using auto and pbo, but my temps would get closer to 90C th...

Yep, mine's still stuck sending...

Looks like it's only trying to connect to port 8080: 13:48:38:WU02:FS01:Sending unit results: id:02 state:SEND error:NO_ERROR project:16435 run:433 clone:0 gen:6 core:0x22 unit:0x0000000903854c135e9a4efb584bc493 13:48:38:WU02:FS01:Uploading 141.53MiB to 3.133.76.19 13:48:38:WU02:FS01:Connecting to 3...

Down again? I've had a WU failed to send for several hours: 06:55:20:WU02:FS01:Sending unit results: id:02 state:SEND error:NO_ERROR project:16435 run:433 clone:0 gen:6 core:0x22 unit:0x0000000903854c135e9a4efb584bc493 06:55:20:WU02:FS01:Uploading 141.53MiB to 3.133.76.19 06:55:20:WU02:FS01:Connecti...

bollix47 wrote:The topology message is not detrimental to the simulation so, no, do not dump. It is more of a cosmetic error and the message will be removed with the next version.

Thanks!

2 GPUs in this system. I had one froze for the CORE_OUTDATED message. Updated core, now the other GPU is getting Size of positions does not match topology: 19:11:37:FS02:Unpaused 19:11:37:WU01:FS02:Downloading core from http://cores.foldingathome.org/v7/lin/64bit/beta/Core_22.fah 19:11:37:WU01:FS02:...

Kebast wrote:I uploaded a new dataset. Couple of older/slower cards mixed in this one, plus a bunch of the GTX970.

oops, I messed up a slot name. Anything that says Ubuntu_GTX970 should say Ubuntu_GTX970-1442Mhz

I uploaded a new dataset. Couple of older/slower cards mixed in this one, plus a bunch of the GTX970.

I just built a Ryzen 3600 on a B450M board and for stability and efficiency I set the clock to 3600 preventing it from boosting. As a result the voltage dropped from 1.4 in the BIOS to 1.1 and the temps are much much lower without really hurting the performance. These boards try to overclock themse...