Folding Forum

After some days of no instances;

PRCG 16448 (0, 16, 178)

Edited a few PRGCs to the message above

Here’s a few latest ones: PRCG 17200 (682, 3, 63) -- (inactive, but 17204 is starting early testing) PRCG 11761 (0, 10454, 140) -- 128.252.203.10 PRCG 11759 (0, 12396, 99) -- 128.252.203.10 EDIT July 22nd, Today I got: PRCG 11760 (0, 743, 110) EDIT July 25th: PRCG 11760 (0, 13115, 32) EDIT July 26th...

Resurrecting this thread from couple of weeks back to give a status update: Out of the 6 clients I have folding, this ”stuck at 0,00%” still comes up maybe once every two days, so the problem is clearly still there. Haven’t really had time to browse/collect any logs. I did browse once just enough to...

In addition to the log from a Z2 machine above, found the setPosition-error from the recent logs of three pretty much identical HP Z240 workstations (i7-7700K & Quadro P4000). Seems to be mostly happening with 144XX units. You consider the setPosition error in one WU would be causing a following...

Unfortunately just had the ”stuck at 0,00%” happen on the HP Z2 (i9 & RTX 4000) client with core version 0.0.11 as well, again at ”state.xml”, log below. If it might have something to do with the problem, this PC has been running headless with RDP used to log a user in. However, before core vers...

Great, thanks for the info bruce. Looking forward to getting the 0.0.11 at some point then! Yes, thought so too that the i7 computers (with P4000) do not have an iGPU, but the i9-9900Ks on the other computers (with RTX 4000) do. Someone just speculated that an iGPU might have something to do with th...

Today this issue came up with one of the HP Z240 / Q P4000 PCs. These machines don't have any integrated GPUs as far as I can tell. Here's the log for this case: *********************** Log Started 2020-06-27T12:28:28Z *********************** 12:28:28:************************* Folding@home Client **...

I can confirm this same issue on HP Z240 and Z2 workstations that have Quadro P4000 and Quadro RTX 4000 GPUs respectively. I’ve noticed this now on four different PCs on maybe 5-6 occasions. It started sometime within a week or so, until then no hiccups whatsoever. In my case the cure has been: Pres...

My logs on several clients are getting a bit full of this: 12:10:13:WU02:FS00:Sending unit results: id:02 state:SEND error:NO_ERROR project:16435 run:277 clone:0 gen:7 core:0x22 unit:0x0000000903854c135e9a4efb5a1a5bea 12:10:13:WU02:FS00:Uploading 141.54MiB to 3.133.76.19 12:10:13:WU02:FS00:Connectin...

Confirming sending errors here as well. Some half a dozen finished WUs on different clients retrying and failing to connect or failing at early percentage when started to upload.

Over 40 tries in the retry counter so far, still getting the PLEASE_WAIT error

PLEASE_WAIT (464) still happening here. I guess they are still out of disk space as it shows only 571.69MiB in serverstats.

I have been getting by log full of PLEASE_WAIT (464): 10:39:54:WU02:FS00:Sending unit results: id:02 state:SEND error:NO_ERROR project:11745 run:0 clone:9705 gen:31 core:0x22 unit:0x0000002f8ca304f15e6bc3742045b884 10:39:54:WU02:FS00:Uploading 14.66MiB to 140.163.4.241 10:39:54:WU02:FS00:Connecting ...

Just came here to confirm some issues with these servers ongoing at the moment. They have persisted for at least 24 hours now: 13:53:30:WU00:FS00:Uploading 55.24MiB to 155.247.164.213 13:53:30:WU00:FS00:Connecting to 155.247.164.213:8080 13:53:51:WARNING:WU00:FS00:WorkServer connection failed on por...