Implementation advice

Moderators: Site Moderators, PandeGroup

Implementation advice

Postby Urbanfreestyle » Wed May 03, 2017 1:08 pm

Good morning,

So i have just put forward a business case to my boss to use the work servers for F@H.
I am anticipating some questions in return so thought i would seek some advice from you all. The servers are spread out across a few domains and different building locations. none (or very few) are running GPUs so not expecting MASSES of ppd but they all run dual quad or better xeon processors.

1. Is it possible to schedule f@h to run out of hours? i know you can set folding low, med or high but how would that affect the load on the servers if they are being used for other things?
2. How is it best to monitor a lot of machines running f@h? is it possible to use a centralised management console to check the progress / load of each client?
3. Can clients be remotely stopped if there is an issue with the rest of the server and we need to isolate the issues?
4. I hear network traffic is pretty low but some machines are in remote locations so would these have any issues?
How do the clients cope in a Hyper-v environment? i guess they just use the resources available to them so we could dedicate 4 or more cores to the VM and it will use those 4?

Hopefully someone can help me out with this as there are approx 150+ servers sat here not doing much.
Posts: 24
Joined: Fri Jul 31, 2015 7:07 pm
Location: Exeter, Devon

Re: Implementation advice

Postby JimboPalmer » Wed May 03, 2017 3:26 pm

1) You would need to use some other scheduler, it is not a feature of F@H. F@H tries to chose the lowest priority possible so it does not pre-empt other tasks. It uses very little RAM or Disk bandwidth. On a workstation, you can choose On Idle, but that will not function as expected on a server, as it is just looking for the screen saver as an idle indicator.
2) there are third party monitoring applications ... post143366
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
Posts: 1015
Joined: Mon Feb 16, 2009 4:12 am
Location: Greenwood MS USA

Re: Implementation advice

Postby Urbanfreestyle » Wed May 03, 2017 3:36 pm

Thanks for the reply, Hopefully they will embrace this idea....
Posts: 24
Joined: Fri Jul 31, 2015 7:07 pm
Location: Exeter, Devon

Re: Implementation advice

Postby bruce » Wed May 03, 2017 4:30 pm

A centralized management console program is included with the distribution package: FAHControl. Not only is it able to monitor remote clients, it can stop/start them as needed to isolate issues. I'm not sure if it has a limit to the number of clients it can monitor.

When run on CPUs, FAH is specifically designed to use only "idle resources" By dint of it running at the lowest possible priority, the OS should schedule all other activities before dispatching work for the CPU(s). [This is not true for GPU processing, but that's not going to be an issue for you.)

We recommend that you get written confirmation of your boss's decision.
Posts: 23063
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Implementation advice

Postby Urbanfreestyle » Thu May 04, 2017 8:02 am

well it is going to staff forum, then to big bosses, will get it in writing and i have written an implimentation plan (by that i mean how we will roll it out and run on a few test servers first)
Posts: 24
Joined: Fri Jul 31, 2015 7:07 pm
Location: Exeter, Devon

Re: Implementation advice

Postby Joe_H » Thu May 04, 2017 1:39 pm

For additional controls and management, the folding client has a supported connection for third party use through the local telnet port. Some have used that for scripts that paused and resumed folding at specific times or for when they were playing a game. So for example, it would be possible to create a script that caused folding to pause or finish processing at a certain time, and then later resume folding later in the day.

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Site Admin
Posts: 4664
Joined: Tue Apr 21, 2009 4:41 pm
Location: W. MA

Return to Discussions of General-FAH topics

Who is online

Users browsing this forum: No registered users and 2 guests