Failed to send results after successful upload?

Moderators: Site Moderators, FAHC Science Team

Post Reply
bmeissen
Posts: 1
Joined: Sun Mar 29, 2020 8:05 pm

Failed to send results after successful upload?

Post by bmeissen »

Hi all,

I've had F@H running on my server and my laptop for 24 hours now - at first the software was giving me lofty estimates of being able to earn 600k points per day between the two machines. Yet I keep watching jobs complete and I'm not getting any points for them. So I dug into the log and it appears I'm completing these jobs but the results aren't being accepted?

Any advice? I didn't put this in the specific WU issue forum because I don't believe my problem is specific to a WU.

Code: Select all

19:55:59:WU00:FS01:Sending unit results: id:00 state:SEND error:NO_ERROR project:11747 run:0 clone:5586 gen:0 core:0x22 unit:0x000000068ca304e75e6bab7aeb685705
19:55:59:WU00:FS01:Uploading 21.92MiB to 140.163.4.231
19:55:59:WU00:FS01:Connecting to 140.163.4.231:8080
19:56:07:WU00:FS01:Upload 16.25%
19:56:15:WU00:FS01:Upload 39.34%
19:56:21:WU00:FS01:Upload 76.97%
19:56:27:WU00:FS01:Upload complete
19:56:27:WU00:FS01:Server responded PLEASE_WAIT (464)
19:56:27:WARNING:WU00:FS01:Failed to send results, will try again later
19:58:20:WU02:FS01:0x22:Completed 40000 out of 1000000 steps (4%)
20:02:33:WU02:FS01:0x22:Completed 50000 out of 1000000 steps (5%)
20:06:52:WU02:FS01:0x22:Completed 60000 out of 1000000 steps (6%)
20:07:05:WU00:FS01:Sending unit results: id:00 state:SEND error:NO_ERROR project:11747 run:0 clone:5586 gen:0 core:0x22 unit:0x000000068ca304e75e6bab7aeb685705
20:07:05:WU00:FS01:Uploading 21.92MiB to 140.163.4.231
20:07:05:WU00:FS01:Connecting to 140.163.4.231:8080
20:07:11:WU00:FS01:Upload 39.34%
20:07:17:WU00:FS01:Upload 61.01%
20:07:25:WU00:FS01:Upload 95.22%
20:07:26:WU00:FS01:Upload complete
20:07:26:WU00:FS01:Server responded PLEASE_WAIT (464)
20:07:26:WARNING:WU00:FS01:Failed to send results, will try again later
20:11:05:WU02:FS01:0x22:Completed 70000 out of 1000000 steps (7%)
20:15:20:WU02:FS01:0x22:Completed 80000 out of 1000000 steps (8%)
20:19:36:WU02:FS01:0x22:Completed 90000 out of 1000000 steps (9%)
20:23:36:WU01:FS00:Connecting to 65.254.110.245:8080
20:23:36:WARNING:WU01:FS00:Failed to get assignment from '65.254.110.245:8080': No WUs available for this configuration
20:23:36:WU01:FS00:Connecting to 18.218.241.186:80
20:23:37:WARNING:WU01:FS00:Failed to get assignment from '18.218.241.186:80': No WUs available for this configuration
20:23:37:ERROR:WU01:FS00:Exception: Could not get an assignment
20:23:51:WU02:FS01:0x22:Completed 100000 out of 1000000 steps (10%)
20:25:02:WU00:FS01:Sending unit results: id:00 state:SEND error:NO_ERROR project:11747 run:0 clone:5586 gen:0 core:0x22 unit:0x000000068ca304e75e6bab7aeb685705
20:25:02:WU00:FS01:Uploading 21.92MiB to 140.163.4.231
20:25:02:WU00:FS01:Connecting to 140.163.4.231:8080
20:25:47:WU00:FS01:Upload 3.42%
20:25:53:WU00:FS01:Upload 31.07%
20:25:59:WU00:FS01:Upload 39.06%
20:26:05:WU00:FS01:Upload 60.44%
20:26:11:WU00:FS01:Upload 90.94%
20:26:13:WU00:FS01:Upload complete
20:26:13:WU00:FS01:Server responded PLEASE_WAIT (464)
20:26:13:WARNING:WU00:FS01:Failed to send results, will try again later
Mod Edit: Added Code Tags - PantherX
IamKeef
Posts: 1
Joined: Mon Mar 30, 2020 5:13 pm

Re: Failed to send results after successful upload?

Post by IamKeef »

I'm getting exactly the same here, does this mean that work is lost or will it upload when the remote server is fixed (I'm assuming it's something on the remote end)?
Joe_H
Site Admin
Posts: 7857
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Failed to send results after successful upload?

Post by Joe_H »

Eventually it should upload and be accepted. The person managing this server has been notified, several others reported the same problem.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
IkkeDus
Posts: 14
Joined: Wed Jun 18, 2008 10:42 am
Hardware configuration: Q9550 @ 2.8 GHz
WIN10 x64
2x Radeon R9 280X-3GB
1x Radeon R9 7950-3GB
Location: Amsterdam, The Netherlands

Re: Failed to send results after successful upload?

Post by IkkeDus »

Any progress here?

A bit of a shame that the points are ticking away.... :(

Code: Select all

21:39:19:WU03:FS02:Sending unit results: id:03 state:SEND error:NO_ERROR project:11742 run:0 clone:5847 gen:10 core:0x22 unit:0x000000148ca304f15e6bc525628927bd
21:39:19:WU03:FS02:Uploading 12.57MiB to 140.163.4.241
21:39:19:WU03:FS02:Connecting to 140.163.4.241:8080
21:39:25:WU03:FS02:Upload 28.83%
21:39:31:WU03:FS02:Upload 61.14%
21:39:37:WU03:FS02:Upload 91.45%
21:39:38:WU03:FS02:Upload complete
21:39:38:WU03:FS02:Server responded PLEASE_WAIT (464)
21:39:38:WARNING:WU03:FS02:Failed to send results, will try again later
Q9550 @ 2.8 GHz | 2x R9 280X-3GB | HD 7950-3GB | Win10 x64

Image
IkkeDus
Posts: 14
Joined: Wed Jun 18, 2008 10:42 am
Hardware configuration: Q9550 @ 2.8 GHz
WIN10 x64
2x Radeon R9 280X-3GB
1x Radeon R9 7950-3GB
Location: Amsterdam, The Netherlands

Re: Failed to send results after successful upload?

Post by IkkeDus »

It got uploaded after several hours (losing points :( )

First occurrence:

Code: Select all

15:00:40:WU03:FS02:Received Unit: id:03 state:DOWNLOAD error:NO_ERROR project:11742 run:0 clone:5847 gen:10 core:0x22 unit:0x000000148ca304f15e6bc525628927bd

Code: Select all

04:38:28:WU03:FS02:Sending unit results: id:03 state:SEND error:NO_ERROR project:11742 run:0 clone:5847 gen:10 core:0x22 unit:0x000000148ca304f15e6bc525628927bd
04:38:28:WU03:FS02:Uploading 12.57MiB to 140.163.4.241
04:38:28:WU03:FS02:Connecting to 140.163.4.241:8080
04:38:34:WU03:FS02:Upload 25.35%
04:38:40:WU03:FS02:Upload 54.67%
04:38:46:WU03:FS02:Upload 84.50%
04:38:50:WU03:FS02:Upload complete
04:38:50:WU03:FS02:Server responded WORK_ACK (400)
04:38:50:WU03:FS02:Final credit estimate, 30930.00 points
04:38:50:WU03:FS02:Cleaning up
Q9550 @ 2.8 GHz | 2x R9 280X-3GB | HD 7950-3GB | Win10 x64

Image
petrkovacs
Posts: 6
Joined: Sun Apr 05, 2020 6:34 pm

Re: Failed to send results after successful upload?

Post by petrkovacs »

Same problem for me today, server 140.163.4.241 won't accept my upload:

Code: Select all

14:17:36:WU03:FS01:Sending unit results: id:03 state:SEND error:NO_ERROR project:11741 run:0 clone:3302 gen:50 core:0x22 unit:0x000000578ca304f15e694648d1408f70
14:17:36:WU03:FS01:Uploading 21.92MiB to 140.163.4.241
14:17:36:WU03:FS01:Connecting to 140.163.4.241:8080
14:18:53:WU03:FS01:Upload 0.57%
14:18:59:WU03:FS01:Upload 7.70%
14:19:05:WU03:FS01:Upload 16.53%
14:19:11:WU03:FS01:Upload 28.51%
14:19:17:WU03:FS01:Upload 41.33%
14:19:23:WU03:FS01:Upload 51.60%
14:19:29:WU03:FS01:Upload 64.14%
14:19:35:WU03:FS01:Upload 76.40%
14:19:41:WU03:FS01:Upload 89.80%
14:19:46:WU03:FS01:Upload complete
14:19:46:WU03:FS01:Server responded PLEASE_WAIT (464)
14:19:46:WARNING:WU03:FS01:Failed to send results, will try again later
chabgood
Posts: 78
Joined: Wed Mar 29, 2017 7:59 pm
Hardware configuration: Core I7 7800
4 - 2080
3 - 2080 Super
32GB ram
Ubuntu OS.
All on an EK waterblock system
Location: Austin Tx.

Re: Failed to send results after successful upload?

Post by chabgood »

Joe_H wrote:Eventually it should upload and be accepted. The person managing this server has been notified, several others reported the same problem.
]

What about 3.21.157.11? I have 3 slots that have been in in SENDING status since Sat.
Image
petrkovacs
Posts: 6
Joined: Sun Apr 05, 2020 6:34 pm

Re: Failed to send results after successful upload?

Post by petrkovacs »

It's strange that the upload goes to 100 %, it says upload complete and then it says "Failed to send the results". That doesn't make sense.
petrkovacs
Posts: 6
Joined: Sun Apr 05, 2020 6:34 pm

Re: Failed to send results after successful upload?

Post by petrkovacs »

My results were finally accepted after cca 20 hours :-).
PantherX
Site Moderator
Posts: 7020
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:

Re: Failed to send results after successful upload?

Post by PantherX »

petrkovacs wrote:It's strange that the upload goes to 100 %, it says upload complete and then it says "Failed to send the results". That doesn't make sense.
It just means that the Server didn't valid the WU and won't. The "send results" means a successful validation is performed on the WU for the Server to make a decision to either accept it or reject it.

I understand from a logical perspective that "send" means "upload" but in this case, the workflow defines the meaning.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
chabgood
Posts: 78
Joined: Wed Mar 29, 2017 7:59 pm
Hardware configuration: Core I7 7800
4 - 2080
3 - 2080 Super
32GB ram
Ubuntu OS.
All on an EK waterblock system
Location: Austin Tx.

Re: Failed to send results after successful upload?

Post by chabgood »

I have 3 slots that are still in SENDING status since SAT. The points are down 28K....
Image
bruce
Posts: 20910
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Failed to send results after successful upload?

Post by bruce »

Serveral issues were addressed over the weekend and things have gotten better. I'm not going to pretend everything is resolved, though. If you're still haveing problems which server(s) is/are involved?
Joe_H
Site Admin
Posts: 7857
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Failed to send results after successful upload?

Post by Joe_H »

chabgood wrote:
Joe_H wrote:Eventually it should upload and be accepted. The person managing this server has been notified, several others reported the same problem.
What about 3.21.157.11? I have 3 slots that have been in in SENDING status since Sat.
I put in a report on that server, and posted about it in a topic specific to the WS and CS involved.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Post Reply