Client stuck on logging [solved]

Moderators: Site Moderators, FAHC Science Team

Client stuck on logging [solved]

Postby ldrahnik » Fri Sep 25, 2020 7:50 am

Hello,

i am using Ubuntu 18.04, concretely Elementary OS. I do not know what happend but inside client i now see connecting. I tried reinstall but without success. Some time i had there updating. But again stucked. Calculations are running on behind, but only CPU i think.

https://ibb.co/FVM200n

Code: Select all
sudo /etc/init.d/FAHClient status           
fahclient is running with PID 1401

sudo /etc/init.d/FAHClient log
06:34:04:WU02:FS00:0xa8: UTC Offset: 2
06:34:04:WU02:FS00:0xa8:        PID: 1458
06:34:04:WU02:FS00:0xa8:        CWD: /var/lib/fahclient/work
06:34:04:WU02:FS00:0xa8:********************************************************************************
06:34:04:WU02:FS00:0xa8:Project: 16810 (Run 53, Clone 674, Gen 28)
06:34:04:WU02:FS00:0xa8:Unit: 0x0000001db2aec48a5eff25b40721bcff
06:34:04:WU02:FS00:0xa8:Digital signatures verified
06:34:04:WU02:FS00:0xa8:Calling: mdrun -c frame28.gro -s frame28.tpr -x frame28.xtc -cpi state.cpt -cpt 15 -nt 1 -ntmpi 1
06:34:04:WU02:FS00:0xa8:Steps: first=14000000 total=14500000
06:34:06:WU02:FS00:0xa8:Completed 475162 out of 500000 steps (95%)


Code: Select all
<config>
  <!-- User Information -->
  <passkey v='XY'/>
  <team v='249477'/>
  <user v='ldrahnik'/>

  <!-- Folding Slots -->
  <slot id='0' type='CPU'/>
  <slot id='1' type='GPU'/>
</config>


Thank you

Best regards

Lukas
Last edited by ldrahnik on Mon Sep 28, 2020 11:48 am, edited 1 time in total.
ldrahnik
 
Posts: 6
Joined: Sun May 10, 2020 5:05 pm

Re: Client stuck on logging

Postby PantherX » Sat Sep 26, 2020 12:48 am

Welcome to the F@H Forum ldrahnik,

Can you please post the log file from /var/lib/fahclient so we can see how the client is configured at start-up and what hardware it is detecting.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
User avatar
PantherX
Site Moderator
 
Posts: 6756
Joined: Wed Dec 23, 2009 10:33 am
Location: Land Of The Long White Cloud

Re: Client stuck on logging

Postby ldrahnik » Sat Sep 26, 2020 7:03 am

Sorry. Here:

Code: Select all
*********************** Log Started 2020-09-25T06:34:03Z ***********************
06:34:03:Trying to access database...
06:34:03:Successfully acquired database lock
06:34:03:Read GPUs.txt
06:34:03:Enabled folding slot 00: READY cpu:1
06:34:03:Enabled folding slot 01: PAUSED gpu:0:GM108 [GeForce GT 840M] (waiting for idle)
06:34:03:****************************** FAHClient ******************************
06:34:03:        Version: 7.6.13
06:34:03:         Author: Joseph Coffland <joseph@cauldrondevelopment.com>
06:34:03:      Copyright: 2020 foldingathome.org
06:34:03:       Homepage: https://foldingathome.org/
06:34:03:           Date: Apr 28 2020
06:34:03:           Time: 04:20:16
06:34:03:       Revision: 5a652817f46116b6e135503af97f18e094414e3b
06:34:03:         Branch: master
06:34:03:       Compiler: GNU 8.3.0
06:34:03:        Options: -std=c++11 -ffunction-sections -fdata-sections -O3
06:34:03:                 -funroll-loops -fno-pie
06:34:03:       Platform: linux2 4.19.0-5-amd64
06:34:03:           Bits: 64
06:34:03:           Mode: Release
06:34:03:           Args: --child /etc/fahclient/config.xml --run-as fahclient
06:34:03:                 --pid-file=/var/run/fahclient.pid --daemon
06:34:03:         Config: /etc/fahclient/config.xml
06:34:03:******************************** CBang ********************************
06:34:03:           Date: Apr 25 2020
06:34:03:           Time: 00:07:53
06:34:03:       Revision: ea081a3b3b0f4a37c4d0440b4f1bc184197c7797
06:34:03:         Branch: master
06:34:03:       Compiler: GNU 8.3.0
06:34:03:        Options: -std=c++11 -ffunction-sections -fdata-sections -O3
06:34:03:                 -funroll-loops -fno-pie -fPIC
06:34:03:       Platform: linux2 4.19.0-5-amd64
06:34:03:           Bits: 64
06:34:03:           Mode: Release
06:34:03:******************************* System ********************************
06:34:03:            CPU: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz
06:34:03:         CPU ID: GenuineIntel Family 6 Model 69 Stepping 1
06:34:03:           CPUs: 4
06:34:03:         Memory: 15.59GiB
06:34:03:    Free Memory: 14.83GiB
06:34:03:        Threads: POSIX_THREADS
06:34:03:     OS Version: 4.15
06:34:03:    Has Battery: true
06:34:03:     On Battery: false
06:34:03:     UTC Offset: 2
06:34:03:            PID: 1403
06:34:03:            CWD: /var/lib/fahclient
06:34:03:             OS: Linux 4.15.0-118-generic x86_64
06:34:03:        OS Arch: AMD64
06:34:03:           GPUs: 1
06:34:03:          GPU 0: Bus:3 Slot:0 Func:0 NVIDIA:4 GM108 [GeForce GT 840M]
06:34:03:  CUDA Device 0: Platform:0 Device:0 Bus:3 Slot:0 Compute:5.0 Driver:11.0
06:34:03:OpenCL Device 0: Platform:0 Device:0 Bus:3 Slot:0 Compute:1.2 Driver:450.66
06:34:03:******************************* libFAH ********************************
06:34:03:           Date: Apr 15 2020
06:34:03:           Time: 21:43:24
06:34:03:       Revision: 216968bc7025029c841ed6e36e81a03a316890d3
06:34:03:         Branch: master
06:34:03:       Compiler: GNU 8.3.0
06:34:03:        Options: -std=c++11 -ffunction-sections -fdata-sections -O3
06:34:03:                 -funroll-loops -fno-pie
06:34:03:       Platform: linux2 4.19.0-5-amd64
06:34:03:           Bits: 64
06:34:03:           Mode: Release
06:34:03:***********************************************************************
06:34:03:<config>
06:34:03:  <!-- User Information -->
06:34:03:  <passkey v='*****'/>
06:34:03:  <team v='249477'/>
06:34:03:  <user v='ldrahnik'/>
06:34:03:
06:34:03:  <!-- Folding Slots -->
06:34:03:  <slot id='0' type='CPU'/>
06:34:03:  <slot id='1' type='GPU'/>
06:34:03:</config>
06:34:03:WU02:FS00:Starting
06:34:03:WU02:FS00:Running FahCore: /usr/bin/FAHCoreWrapper /var/lib/fahclient/cores/cores.foldingathome.org/lin/64bit-avx2-256/a8-0.0.6/Core_a8.fah/FahCore_a8 -dir 02 -suffix 01 -version 706 -lifeline 1403 -checkpoint 15 -np 1
06:34:03:WU02:FS00:Started FahCore on PID 1444
06:34:03:WU02:FS00:Core PID:1458
06:34:03:WU02:FS00:FahCore 0xa8 started
06:34:04:WU02:FS00:0xa8:*********************** Log Started 2020-09-25T06:34:03Z ***********************
06:34:04:WU02:FS00:0xa8:************************** Gromacs Folding@home Core ***************************
06:34:04:WU02:FS00:0xa8:       Core: Gromacs
06:34:04:WU02:FS00:0xa8:       Type: 0xa8
06:34:04:WU02:FS00:0xa8:    Version: 0.0.6
06:34:04:WU02:FS00:0xa8:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
06:34:04:WU02:FS00:0xa8:  Copyright: 2020 foldingathome.org
06:34:04:WU02:FS00:0xa8:   Homepage: https://foldingathome.org/
06:34:04:WU02:FS00:0xa8:       Date: Jul 25 2020
06:34:04:WU02:FS00:0xa8:       Time: 14:01:55
06:34:04:WU02:FS00:0xa8:   Compiler: GNU 8.3.0
06:34:04:WU02:FS00:0xa8:    Options: -std=c++14 -fsigned-char -ffunction-sections -fdata-sections -O3
06:34:04:WU02:FS00:0xa8:             -funroll-loops -fno-pie
06:34:04:WU02:FS00:0xa8:   Platform: linux2 4.15.0-108-generic
06:34:04:WU02:FS00:0xa8:       Bits: 64
06:34:04:WU02:FS00:0xa8:       Mode: Release
06:34:04:WU02:FS00:0xa8:       SIMD: avx2_256
06:34:04:WU02:FS00:0xa8:     OpenMP: ON
06:34:04:WU02:FS00:0xa8:       CUDA: OFF
06:34:04:WU02:FS00:0xa8:       Args: -dir 02 -suffix 01 -version 706 -lifeline 1444 -checkpoint 15 -np 1
06:34:04:WU02:FS00:0xa8:************************************ libFAH ************************************
06:34:04:WU02:FS00:0xa8:       Date: Jul 12 2020
06:34:04:WU02:FS00:0xa8:       Time: 18:25:05
06:34:04:WU02:FS00:0xa8:   Compiler: GNU 8.3.0
06:34:04:WU02:FS00:0xa8:    Options: -std=c++14 -fsigned-char -ffunction-sections -fdata-sections -O3
06:34:04:WU02:FS00:0xa8:             -funroll-loops -fno-pie
06:34:04:WU02:FS00:0xa8:   Platform: linux2 4.15.0-108-generic
06:34:04:WU02:FS00:0xa8:       Bits: 64
06:34:04:WU02:FS00:0xa8:       Mode: Release
06:34:04:WU02:FS00:0xa8:************************************ CBang *************************************
06:34:04:WU02:FS00:0xa8:       Date: Jul 12 2020
06:34:04:WU02:FS00:0xa8:       Time: 18:24:52
06:34:04:WU02:FS00:0xa8:   Compiler: GNU 8.3.0
06:34:04:WU02:FS00:0xa8:    Options: -std=c++14 -fsigned-char -ffunction-sections -fdata-sections -O3
06:34:04:WU02:FS00:0xa8:             -funroll-loops -fno-pie -fPIC
06:34:04:WU02:FS00:0xa8:   Platform: linux2 4.15.0-108-generic
06:34:04:WU02:FS00:0xa8:       Bits: 64
06:34:04:WU02:FS00:0xa8:       Mode: Release
06:34:04:WU02:FS00:0xa8:************************************ System ************************************
06:34:04:WU02:FS00:0xa8:        CPU: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz
06:34:04:WU02:FS00:0xa8:     CPU ID: GenuineIntel Family 6 Model 69 Stepping 1
06:34:04:WU02:FS00:0xa8:       CPUs: 4
06:34:04:WU02:FS00:0xa8:     Memory: 15.59GiB
06:34:04:WU02:FS00:0xa8:Free Memory: 14.78GiB
06:34:04:WU02:FS00:0xa8:    Threads: POSIX_THREADS
06:34:04:WU02:FS00:0xa8: OS Version: 4.15
06:34:04:WU02:FS00:0xa8:Has Battery: true
06:34:04:WU02:FS00:0xa8: On Battery: false
06:34:04:WU02:FS00:0xa8: UTC Offset: 2
06:34:04:WU02:FS00:0xa8:        PID: 1458
06:34:04:WU02:FS00:0xa8:        CWD: /var/lib/fahclient/work
06:34:04:WU02:FS00:0xa8:********************************************************************************
06:34:04:WU02:FS00:0xa8:Project: 16810 (Run 53, Clone 674, Gen 28)
06:34:04:WU02:FS00:0xa8:Unit: 0x0000001db2aec48a5eff25b40721bcff
06:34:04:WU02:FS00:0xa8:Digital signatures verified
06:34:04:WU02:FS00:0xa8:Calling: mdrun -c frame28.gro -s frame28.tpr -x frame28.xtc -cpi state.cpt -cpt 15 -nt 1 -ntmpi 1
06:34:04:WU02:FS00:0xa8:Steps: first=14000000 total=14500000
06:34:06:WU02:FS00:0xa8:Completed 475162 out of 500000 steps (95%)
06:49:38:WU02:FS00:0xa8:Completed 480000 out of 500000 steps (96%)
07:04:51:WU02:FS00:0xa8:Completed 485000 out of 500000 steps (97%)
07:19:47:WU02:FS00:0xa8:Completed 490000 out of 500000 steps (98%)
07:34:47:WU02:FS00:0xa8:Completed 495000 out of 500000 steps (99%)
07:34:48:WU00:FS00:Connecting to assign1.foldingathome.org:80
07:34:48:WU00:FS00:Assigned to work server 128.252.203.10
07:34:48:WU00:FS00:Requesting new work unit for slot 00: RUNNING cpu:1 from 128.252.203.10
07:34:48:WU00:FS00:Connecting to 128.252.203.10:8080
07:34:49:ERROR:WU00:FS00:Exception: Server did not assign work unit
07:34:49:WU00:FS00:Connecting to assign1.foldingathome.org:80
07:34:49:WARNING:WU00:FS00:Failed to get assignment from 'assign1.foldingathome.org:80': No WUs available for this configuration
07:34:49:WU00:FS00:Connecting to assign2.foldingathome.org:80
07:34:50:WU00:FS00:Assigned to work server 206.223.170.146
07:34:50:WU00:FS00:Requesting new work unit for slot 00: RUNNING cpu:1 from 206.223.170.146
07:34:50:WU00:FS00:Connecting to 206.223.170.146:8080
07:34:51:WU00:FS00:Downloading 3.39MiB
07:34:56:WU00:FS00:Download complete
07:34:56:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:14256 run:0 clone:4569 gen:23 core:0xa7 unit:0x00000018cedfaa925f6a392f22205e58
07:49:43:WU02:FS00:0xa8:Completed 500000 out of 500000 steps (100%)
07:49:45:WU02:FS00:0xa8:Saving result file ../logfile_01.txt
07:49:45:WU02:FS00:0xa8:Saving result file ener.edr
07:49:45:WU02:FS00:0xa8:Saving result file frame28.gro
07:49:45:WU02:FS00:0xa8:Saving result file frame28.xtc
07:49:45:WU02:FS00:0xa8:Saving result file md.log
07:49:45:WU02:FS00:0xa8:Saving result file science.log
07:49:45:WU02:FS00:0xa8:Saving result file state.cpt
07:49:45:WU02:FS00:0xa8:Folding@home Core Shutdown: FINISHED_UNIT
07:49:45:WU02:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
07:49:45:WU02:FS00:Sending unit results: id:02 state:SEND error:NO_ERROR project:16810 run:53 clone:674 gen:28 core:0xa8 unit:0x0000001db2aec48a5eff25b40721bcff
07:49:45:WU02:FS00:Uploading 8.09MiB to 178.174.196.138
07:49:45:WU02:FS00:Connecting to 178.174.196.138:8080
07:49:45:WU00:FS00:Starting
07:49:45:WU00:FS00:Running FahCore: /usr/bin/FAHCoreWrapper /var/lib/fahclient/cores/cores.foldingathome.org/lin/64bit-avx-256/a7-0.0.19/Core_a7.fah/FahCore_a7 -dir 00 -suffix 01 -version 706 -lifeline 1403 -checkpoint 15 -np 1
07:49:45:WU00:FS00:Started FahCore on PID 8912
07:49:45:WU00:FS00:Core PID:8916
07:49:45:WU00:FS00:FahCore 0xa7 started
07:49:46:WU00:FS00:0xa7:*********************** Log Started 2020-09-25T07:49:45Z ***********************
07:49:46:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
07:49:46:WU00:FS00:0xa7:       Type: 0xa7
07:49:46:WU00:FS00:0xa7:       Core: Gromacs
07:49:46:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 706 -lifeline 8912 -checkpoint 15 -np 1
07:49:46:WU00:FS00:0xa7:************************************ CBang *************************************
07:49:46:WU00:FS00:0xa7:       Date: Nov 27 2019
07:49:46:WU00:FS00:0xa7:       Time: 11:26:54
07:49:46:WU00:FS00:0xa7:   Revision: d25803215b59272441049dfa05a0a9bf7a6e3c48
07:49:46:WU00:FS00:0xa7:     Branch: master
07:49:46:WU00:FS00:0xa7:   Compiler: GNU 8.3.0
07:49:46:WU00:FS00:0xa7:    Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
07:49:46:WU00:FS00:0xa7:             -fno-pie -fPIC
07:49:46:WU00:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
07:49:46:WU00:FS00:0xa7:       Bits: 64
07:49:46:WU00:FS00:0xa7:       Mode: Release
07:49:46:WU00:FS00:0xa7:************************************ System ************************************
07:49:46:WU00:FS00:0xa7:        CPU: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz
07:49:46:WU00:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 69 Stepping 1
07:49:46:WU00:FS00:0xa7:       CPUs: 4
07:49:46:WU00:FS00:0xa7:     Memory: 15.59GiB
07:49:46:WU00:FS00:0xa7:Free Memory: 11.17GiB
07:49:46:WU00:FS00:0xa7:    Threads: POSIX_THREADS
07:49:46:WU00:FS00:0xa7: OS Version: 4.15
07:49:46:WU00:FS00:0xa7:Has Battery: true
07:49:46:WU00:FS00:0xa7: On Battery: false
07:49:46:WU00:FS00:0xa7: UTC Offset: 2
07:49:46:WU00:FS00:0xa7:        PID: 8916
07:49:46:WU00:FS00:0xa7:        CWD: /var/lib/fahclient/work
07:49:46:WU00:FS00:0xa7:******************************** Build - libFAH ********************************
07:49:46:WU00:FS00:0xa7:    Version: 0.0.19
07:49:46:WU00:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
07:49:46:WU00:FS00:0xa7:  Copyright: 2019 foldingathome.org
07:49:46:WU00:FS00:0xa7:   Homepage: https://foldingathome.org/
07:49:46:WU00:FS00:0xa7:       Date: Nov 26 2019
07:49:46:WU00:FS00:0xa7:       Time: 00:41:42
07:49:46:WU00:FS00:0xa7:   Revision: d5b5c747532224f986b7cd02c968ed9a20c16d6e
07:49:46:WU00:FS00:0xa7:     Branch: master
07:49:46:WU00:FS00:0xa7:   Compiler: GNU 8.3.0
07:49:46:WU00:FS00:0xa7:    Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
07:49:46:WU00:FS00:0xa7:             -fno-pie
07:49:46:WU00:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
07:49:46:WU00:FS00:0xa7:       Bits: 64
07:49:46:WU00:FS00:0xa7:       Mode: Release
07:49:46:WU00:FS00:0xa7:************************************ Build *************************************
07:49:46:WU00:FS00:0xa7:       SIMD: avx_256
07:49:46:WU00:FS00:0xa7:********************************************************************************
07:49:46:WU00:FS00:0xa7:Project: 14256 (Run 0, Clone 4569, Gen 23)
07:49:46:WU00:FS00:0xa7:Unit: 0x00000018cedfaa925f6a392f22205e58
07:49:46:WU00:FS00:0xa7:Reading tar file core.xml
07:49:46:WU00:FS00:0xa7:Reading tar file frame23.tpr
07:49:46:WU00:FS00:0xa7:Digital signatures verified
07:49:46:WU00:FS00:0xa7:Calling: mdrun -s frame23.tpr -o frame23.trr -x frame23.xtc -cpt 15 -nt 1
07:49:46:WU00:FS00:0xa7:Steps: first=5750000 total=250000
07:49:47:WU00:FS00:0xa7:Completed 1 out of 250000 steps (0%)
07:49:51:WU02:FS00:Upload 35.56%
07:49:57:WU02:FS00:Upload 74.98%
07:50:01:WU02:FS00:Upload complete
07:50:01:WU02:FS00:Server responded WORK_ACK (400)
07:50:01:WU02:FS00:Final credit estimate, 2623.00 points
07:50:01:WU02:FS00:Cleaning up
07:56:44:WU00:FS00:0xa7:Completed 2500 out of 250000 steps (1%)
08:03:42:WU00:FS00:0xa7:Completed 5000 out of 250000 steps (2%)
08:10:41:WU00:FS00:0xa7:Completed 7500 out of 250000 steps (3%)
08:17:39:WU00:FS00:0xa7:Completed 10000 out of 250000 steps (4%)
08:24:38:WU00:FS00:0xa7:Completed 12500 out of 250000 steps (5%)
08:31:36:WU00:FS00:0xa7:Completed 15000 out of 250000 steps (6%)
08:38:53:WU00:FS00:0xa7:Completed 17500 out of 250000 steps (7%)
08:45:52:WU00:FS00:0xa7:Completed 20000 out of 250000 steps (8%)
08:52:55:WU00:FS00:0xa7:Completed 22500 out of 250000 steps (9%)
09:00:05:WU00:FS00:0xa7:Completed 25000 out of 250000 steps (10%)
09:07:04:WU00:FS00:0xa7:Completed 27500 out of 250000 steps (11%)
09:14:03:WU00:FS00:0xa7:Completed 30000 out of 250000 steps (12%)
09:21:02:WU00:FS00:0xa7:Completed 32500 out of 250000 steps (13%)
09:28:00:WU00:FS00:0xa7:Completed 35000 out of 250000 steps (14%)
09:34:58:WU00:FS00:0xa7:Completed 37500 out of 250000 steps (15%)
09:41:56:WU00:FS00:0xa7:Completed 40000 out of 250000 steps (16%)
09:48:54:WU00:FS00:0xa7:Completed 42500 out of 250000 steps (17%)
09:55:52:WU00:FS00:0xa7:Completed 45000 out of 250000 steps (18%)
10:02:50:WU00:FS00:0xa7:Completed 47500 out of 250000 steps (19%)
10:09:49:WU00:FS00:0xa7:Completed 50000 out of 250000 steps (20%)
10:16:47:WU00:FS00:0xa7:Completed 52500 out of 250000 steps (21%)
10:23:46:WU00:FS00:0xa7:Completed 55000 out of 250000 steps (22%)
10:30:44:WU00:FS00:0xa7:Completed 57500 out of 250000 steps (23%)
10:37:49:WU00:FS00:0xa7:Completed 60000 out of 250000 steps (24%)
10:44:49:WU00:FS00:0xa7:Completed 62500 out of 250000 steps (25%)
10:52:13:WU00:FS00:0xa7:Completed 65000 out of 250000 steps (26%)
10:59:09:WU00:FS00:0xa7:Completed 67500 out of 250000 steps (27%)
11:06:06:WU00:FS00:0xa7:Completed 70000 out of 250000 steps (28%)
11:13:02:WU00:FS00:0xa7:Completed 72500 out of 250000 steps (29%)
11:19:58:WU00:FS00:0xa7:Completed 75000 out of 250000 steps (30%)
11:26:53:WU00:FS00:0xa7:Completed 77500 out of 250000 steps (31%)
11:33:49:WU00:FS00:0xa7:Completed 80000 out of 250000 steps (32%)
11:40:46:WU00:FS00:0xa7:Completed 82500 out of 250000 steps (33%)
11:47:42:WU00:FS00:0xa7:Completed 85000 out of 250000 steps (34%)
11:54:40:WU00:FS00:0xa7:Completed 87500 out of 250000 steps (35%)
12:01:37:WU00:FS00:0xa7:Completed 90000 out of 250000 steps (36%)
12:08:35:WU00:FS00:0xa7:Completed 92500 out of 250000 steps (37%)
12:15:32:WU00:FS00:0xa7:Completed 95000 out of 250000 steps (38%)
12:22:30:WU00:FS00:0xa7:Completed 97500 out of 250000 steps (39%)
12:29:28:WU00:FS00:0xa7:Completed 100000 out of 250000 steps (40%)
******************************* Date: 2020-09-25 *******************************
12:36:25:WU00:FS00:0xa7:Completed 102500 out of 250000 steps (41%)
12:43:52:WU00:FS00:0xa7:Completed 105000 out of 250000 steps (42%)
12:51:24:WU00:FS00:0xa7:Completed 107500 out of 250000 steps (43%)
12:59:11:WU00:FS00:0xa7:Completed 110000 out of 250000 steps (44%)
13:06:39:WU00:FS00:0xa7:Completed 112500 out of 250000 steps (45%)
13:13:47:WU00:FS00:0xa7:Completed 115000 out of 250000 steps (46%)
13:20:55:WU00:FS00:0xa7:Completed 117500 out of 250000 steps (47%)
13:28:28:WU00:FS00:0xa7:Completed 120000 out of 250000 steps (48%)
13:35:25:WU00:FS00:0xa7:Completed 122500 out of 250000 steps (49%)
13:42:22:WU00:FS00:0xa7:Completed 125000 out of 250000 steps (50%)
13:49:18:WU00:FS00:0xa7:Completed 127500 out of 250000 steps (51%)
13:56:35:WU00:FS00:0xa7:Completed 130000 out of 250000 steps (52%)
14:03:32:WU00:FS00:0xa7:Completed 132500 out of 250000 steps (53%)
14:10:29:WU00:FS00:0xa7:Completed 135000 out of 250000 steps (54%)
14:17:26:WU00:FS00:0xa7:Completed 137500 out of 250000 steps (55%)
14:24:22:WU00:FS00:0xa7:Completed 140000 out of 250000 steps (56%)
14:31:19:WU00:FS00:0xa7:Completed 142500 out of 250000 steps (57%)
14:38:16:WU00:FS00:0xa7:Completed 145000 out of 250000 steps (58%)
14:45:13:WU00:FS00:0xa7:Completed 147500 out of 250000 steps (59%)
14:52:09:WU00:FS00:0xa7:Completed 150000 out of 250000 steps (60%)
14:59:06:WU00:FS00:0xa7:Completed 152500 out of 250000 steps (61%)
15:06:14:WU00:FS00:0xa7:Completed 155000 out of 250000 steps (62%)
15:13:33:WU00:FS00:0xa7:Completed 157500 out of 250000 steps (63%)
15:20:51:WU00:FS00:0xa7:Completed 160000 out of 250000 steps (64%)
15:28:09:WU00:FS00:0xa7:Completed 162500 out of 250000 steps (65%)
15:35:27:WU00:FS00:0xa7:Completed 165000 out of 250000 steps (66%)
15:42:46:WU00:FS00:0xa7:Completed 167500 out of 250000 steps (67%)
15:50:04:WU00:FS00:0xa7:Completed 170000 out of 250000 steps (68%)
15:57:22:WU00:FS00:0xa7:Completed 172500 out of 250000 steps (69%)
16:04:40:WU00:FS00:0xa7:Completed 175000 out of 250000 steps (70%)
16:11:57:WU00:FS00:0xa7:Completed 177500 out of 250000 steps (71%)
16:19:23:WU00:FS00:0xa7:Completed 180000 out of 250000 steps (72%)
16:26:55:WU00:FS00:0xa7:Completed 182500 out of 250000 steps (73%)
16:33:57:WU00:FS00:0xa7:Completed 185000 out of 250000 steps (74%)
16:41:07:WU00:FS00:0xa7:Completed 187500 out of 250000 steps (75%)
16:48:42:WU00:FS00:0xa7:Completed 190000 out of 250000 steps (76%)
16:56:02:WU00:FS00:0xa7:Completed 192500 out of 250000 steps (77%)
17:03:14:WU00:FS00:0xa7:Completed 195000 out of 250000 steps (78%)
17:10:13:WU00:FS00:0xa7:Completed 197500 out of 250000 steps (79%)
17:17:09:WU00:FS00:0xa7:Completed 200000 out of 250000 steps (80%)
17:24:06:WU00:FS00:0xa7:Completed 202500 out of 250000 steps (81%)
17:31:02:WU00:FS00:0xa7:Completed 205000 out of 250000 steps (82%)
17:37:59:WU00:FS00:0xa7:Completed 207500 out of 250000 steps (83%)
17:44:55:WU00:FS00:0xa7:Completed 210000 out of 250000 steps (84%)
17:51:51:WU00:FS00:0xa7:Completed 212500 out of 250000 steps (85%)
17:58:47:WU00:FS00:0xa7:Completed 215000 out of 250000 steps (86%)
18:05:44:WU00:FS00:0xa7:Completed 217500 out of 250000 steps (87%)
18:12:39:WU00:FS00:0xa7:Completed 220000 out of 250000 steps (88%)
18:19:36:WU00:FS00:0xa7:Completed 222500 out of 250000 steps (89%)
18:26:32:WU00:FS00:0xa7:Completed 225000 out of 250000 steps (90%)
18:33:28:WU00:FS00:0xa7:Completed 227500 out of 250000 steps (91%)
******************************* Date: 2020-09-25 *******************************
18:40:25:WU00:FS00:0xa7:Completed 230000 out of 250000 steps (92%)
18:47:22:WU00:FS00:0xa7:Completed 232500 out of 250000 steps (93%)
18:54:19:WU00:FS00:0xa7:Completed 235000 out of 250000 steps (94%)
19:01:16:WU00:FS00:0xa7:Completed 237500 out of 250000 steps (95%)
19:08:12:WU00:FS00:0xa7:Completed 240000 out of 250000 steps (96%)
19:15:08:WU00:FS00:0xa7:Completed 242500 out of 250000 steps (97%)
19:22:16:WU00:FS00:0xa7:Completed 245000 out of 250000 steps (98%)
19:29:13:WU00:FS00:0xa7:Completed 247500 out of 250000 steps (99%)
19:29:14:WU02:FS00:Connecting to assign1.foldingathome.org:80
19:29:15:WARNING:WU02:FS00:Failed to get assignment from 'assign1.foldingathome.org:80': No WUs available for this configuration
19:29:15:WU02:FS00:Connecting to assign2.foldingathome.org:80
19:29:15:WU02:FS00:Assigned to work server 69.94.66.7
19:29:15:WU02:FS00:Requesting new work unit for slot 00: RUNNING cpu:1 from 69.94.66.7
19:29:15:WU02:FS00:Connecting to 69.94.66.7:8080
19:29:15:WU02:FS00:Downloading 2.84MiB
19:29:18:WU02:FS00:Download complete
19:29:18:WU02:FS00:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:14379 run:287 clone:2 gen:445 core:0xa7 unit:0x00000202455e42075e9330dbb3131596
19:36:11:WU00:FS00:0xa7:Completed 250000 out of 250000 steps (100%)
19:36:13:WU00:FS00:0xa7:Saving result file ../logfile_01.txt
19:36:13:WU00:FS00:0xa7:Saving result file frame23.trr
19:36:13:WU00:FS00:0xa7:Saving result file frame23.xtc
19:36:13:WU00:FS00:0xa7:Saving result file md.log
19:36:13:WU00:FS00:0xa7:Saving result file science.log
19:36:13:WU00:FS00:0xa7:Folding@home Core Shutdown: FINISHED_UNIT
19:36:13:WU00:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
19:36:13:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:14256 run:0 clone:4569 gen:23 core:0xa7 unit:0x00000018cedfaa925f6a392f22205e58
19:36:13:WU00:FS00:Uploading 2.82MiB to 206.223.170.146
19:36:13:WU00:FS00:Connecting to 206.223.170.146:8080
19:36:13:WU02:FS00:Starting
19:36:13:WU02:FS00:Running FahCore: /usr/bin/FAHCoreWrapper /var/lib/fahclient/cores/cores.foldingathome.org/lin/64bit-avx-256/a7-0.0.19/Core_a7.fah/FahCore_a7 -dir 02 -suffix 01 -version 706 -lifeline 1403 -checkpoint 15 -np 1
19:36:13:WU02:FS00:Started FahCore on PID 27656
19:36:13:WU02:FS00:Core PID:27660
19:36:13:WU02:FS00:FahCore 0xa7 started
19:36:13:WU02:FS00:0xa7:*********************** Log Started 2020-09-25T19:36:13Z ***********************
19:36:13:WU02:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
19:36:13:WU02:FS00:0xa7:       Type: 0xa7
19:36:13:WU02:FS00:0xa7:       Core: Gromacs
19:36:13:WU02:FS00:0xa7:       Args: -dir 02 -suffix 01 -version 706 -lifeline 27656 -checkpoint 15 -np
19:36:13:WU02:FS00:0xa7:             1
19:36:13:WU02:FS00:0xa7:************************************ CBang *************************************
19:36:13:WU02:FS00:0xa7:       Date: Nov 27 2019
19:36:13:WU02:FS00:0xa7:       Time: 11:26:54
19:36:13:WU02:FS00:0xa7:   Revision: d25803215b59272441049dfa05a0a9bf7a6e3c48
19:36:13:WU02:FS00:0xa7:     Branch: master
19:36:13:WU02:FS00:0xa7:   Compiler: GNU 8.3.0
19:36:13:WU02:FS00:0xa7:    Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
19:36:13:WU02:FS00:0xa7:             -fno-pie -fPIC
19:36:13:WU02:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
19:36:13:WU02:FS00:0xa7:       Bits: 64
19:36:13:WU02:FS00:0xa7:       Mode: Release
19:36:13:WU02:FS00:0xa7:************************************ System ************************************
19:36:13:WU02:FS00:0xa7:        CPU: Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz
19:36:13:WU02:FS00:0xa7:     CPU ID: GenuineIntel Family 6 Model 69 Stepping 1
19:36:13:WU02:FS00:0xa7:       CPUs: 4
19:36:13:WU02:FS00:0xa7:     Memory: 15.59GiB
19:36:13:WU02:FS00:0xa7:Free Memory: 10.10GiB
19:36:13:WU02:FS00:0xa7:    Threads: POSIX_THREADS
19:36:13:WU02:FS00:0xa7: OS Version: 4.15
19:36:13:WU02:FS00:0xa7:Has Battery: true
19:36:13:WU02:FS00:0xa7: On Battery: false
19:36:13:WU02:FS00:0xa7: UTC Offset: 2
19:36:13:WU02:FS00:0xa7:        PID: 27660
19:36:13:WU02:FS00:0xa7:        CWD: /var/lib/fahclient/work
19:36:13:WU02:FS00:0xa7:******************************** Build - libFAH ********************************
19:36:13:WU02:FS00:0xa7:    Version: 0.0.19
19:36:13:WU02:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
19:36:13:WU02:FS00:0xa7:  Copyright: 2019 foldingathome.org
19:36:13:WU02:FS00:0xa7:   Homepage: https://foldingathome.org/
19:36:13:WU02:FS00:0xa7:       Date: Nov 26 2019
19:36:13:WU02:FS00:0xa7:       Time: 00:41:42
19:36:13:WU02:FS00:0xa7:   Revision: d5b5c747532224f986b7cd02c968ed9a20c16d6e
19:36:13:WU02:FS00:0xa7:     Branch: master
19:36:13:WU02:FS00:0xa7:   Compiler: GNU 8.3.0
19:36:13:WU02:FS00:0xa7:    Options: -std=c++11 -ffunction-sections -fdata-sections -O3 -funroll-loops
19:36:13:WU02:FS00:0xa7:             -fno-pie
19:36:13:WU02:FS00:0xa7:   Platform: linux2 4.19.0-5-amd64
19:36:13:WU02:FS00:0xa7:       Bits: 64
19:36:13:WU02:FS00:0xa7:       Mode: Release
19:36:13:WU02:FS00:0xa7:************************************ Build *************************************
19:36:13:WU02:FS00:0xa7:       SIMD: avx_256
19:36:13:WU02:FS00:0xa7:********************************************************************************
19:36:13:WU02:FS00:0xa7:Project: 14379 (Run 287, Clone 2, Gen 445)
19:36:13:WU02:FS00:0xa7:Unit: 0x00000202455e42075e9330dbb3131596
19:36:13:WU02:FS00:0xa7:Reading tar file core.xml
19:36:13:WU02:FS00:0xa7:Reading tar file frame445.tpr
19:36:13:WU02:FS00:0xa7:Digital signatures verified
19:36:13:WU02:FS00:0xa7:Calling: mdrun -s frame445.tpr -o frame445.trr -cpt 15 -nt 1
19:36:13:WU02:FS00:0xa7:Steps: first=0 total=250000
19:36:15:WU02:FS00:0xa7:Completed 1 out of 250000 steps (0%)
19:36:19:WU00:FS00:Upload 95.27%
19:36:19:WU00:FS00:Upload complete
19:36:19:WU00:FS00:Server responded WORK_ACK (400)
19:36:19:WU00:FS00:Final credit estimate, 1754.00 points
19:36:19:WU00:FS00:Cleaning up
19:44:09:WU02:FS00:0xa7:Completed 2500 out of 250000 steps (1%)
19:52:04:WU02:FS00:0xa7:Completed 5000 out of 250000 steps (2%)
19:59:18:Caught signal SIGINT(2) on PID 1403
19:59:18:Exiting, please wait. . .
19:59:19:FS00:Shutting core down
19:59:19:WU02:FS00:0xa7:Caught signal SIGINT(2) on PID 27660
19:59:19:WU02:FS00:0xa7:Exiting, please wait. . .
19:59:20:Clean exit
ldrahnik
 
Posts: 6
Joined: Sun May 10, 2020 5:05 pm

Re: Client stuck on logging

Postby gunnarre » Sat Sep 26, 2020 7:45 am

GPU folding is not enabled unless you slide the Folding Power slide to Medium or Full.

Idle detection for the GPU is another matter - it depends on your operating system what it considers to be an idle GPU. I gave up trying to make sense of it and just manually pause the GPU if I'm going to be gaming on very high settings. (I can play some games at full FPS even while folding, but not others.).
Image
gunnarre
 
Posts: 180
Joined: Sun May 24, 2020 8:23 pm
Location: Norway

Re: Client stuck on logging

Postby ldrahnik » Sat Sep 26, 2020 4:32 pm

Any idea how i should continue with debugging?

GPU driver says:

Code: Select all
 nvidia-smi
Sat Sep 26 17:31:42 2020       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 450.66       Driver Version: 450.66       CUDA Version: 11.0     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|                               |                      |               MIG M. |
|===============================+======================+======================|
|   0  GeForce 840M        Off  | 00000000:03:00.0 Off |                  N/A |
| N/A   60C    P0    N/A /  N/A |    508MiB /  2004MiB |      5%      Default |
|                               |                      |                  N/A |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                                  |
|  GPU   GI   CI        PID   Type   Process name                  GPU Memory |
|        ID   ID                                                   Usage      |
|=============================================================================|
|    0   N/A  N/A      1006      G   /usr/lib/xorg/Xorg                155MiB |
|    0   N/A  N/A      1637      G   gala                               59MiB |
|    0   N/A  N/A      1793      G   ...gAAAAAAAAA --shared-files       55MiB |
|    0   N/A  N/A      1909      G   ...AAAAAAAAA= --shared-files      229MiB |
+-----------------------------------------------------------------------------+
ldrahnik
 
Posts: 6
Joined: Sun May 10, 2020 5:05 pm

Re: Client stuck on logging

Postby gunnarre » Sat Sep 26, 2020 6:10 pm

Did you pull the Folding Power slider to full?

Image

Edit: Or visit http://client.foldingathome.org and do it there.

If you can't get FAHControl to connect to the client, then put this line in /etc/fahclient/config.xml and re-start the client:
Code: Select all
<power v='full'/>


so in other words

Code: Select all
<config>
  <!-- User Information -->
  <passkey v='XY'/>
  <team v='249477'/>
  <user v='ldrahnik'/>

  <power v='full'/>

  <!-- Folding Slots -->
  <slot id='0' type='CPU'/>
  <slot id='1' type='GPU'/>
</config>
gunnarre
 
Posts: 180
Joined: Sun May 24, 2020 8:23 pm
Location: Norway

Re: Client stuck on logging

Postby ldrahnik » Sat Sep 26, 2020 6:58 pm

Oh, ok. Did not understand fully to your answer. Its solution. Thanks! GPU now runs. So drivers was not a problem.

GUI Client still not. But i think i dont need GUI.
ldrahnik
 
Posts: 6
Joined: Sun May 10, 2020 5:05 pm

Re: Client stuck on logging

Postby gunnarre » Sat Sep 26, 2020 7:48 pm

Glad to see you got it working.
GUI client should work in Ubuntu 18 without any extra work. If you press "Configure" does the address for the client say "localhost" and port number "36330"?

Anyway, the web client is enough for just getting it running. Happy folding.
gunnarre
 
Posts: 180
Joined: Sun May 24, 2020 8:23 pm
Location: Norway

Re: Client stuck on logging

Postby ldrahnik » Sun Sep 27, 2020 7:50 am

Works. Port was incremented by one. Where everywhere i should change port when i want change it? Is it possible?

Thanks!
ldrahnik
 
Posts: 6
Joined: Sun May 10, 2020 5:05 pm

Re: Client stuck on logging

Postby gunnarre » Sun Sep 27, 2020 8:36 am

You're welcome.

If you want to change the command port for the client and control application, you have to change it both in the "Connection" tab and the "Remote Access" tab, and then restart the client. The config.xml line is
Code: Select all
<command-port v='36330'/>

You really only need to change the port number if you're running multiple clients on the same computer (for virtualization for example), or if you're running some other service on that port.
gunnarre
 
Posts: 180
Joined: Sun May 24, 2020 8:23 pm
Location: Norway


Return to Discussions of General-FAH topics

Who is online

Users browsing this forum: JimboPalmer and 4 guests

cron