128.143.231.201 (BA) acting up?

Moderators: Site Moderators, FAHC Science Team

7im
Posts: 10189
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: 128.143.231.201 (BA) acting up?

Post by 7im »

While I'm sure someone has already notified PG, I sent another ping.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-alias-
Posts: 121
Joined: Sun Feb 22, 2009 1:20 pm

Re: 128.143.231.201 (BA) acting up?

Post by -alias- »

Thanks 7im!
I fold with Linux 64 fah v6.34 on all my 6 servers and it can occure on one or more at the same day, mostly one. Today there have been two issues, but at the moment they are all folding normaly. I always have to delete all without config & fah-software, and then reset the server. If I do not reset the server it will not download a new normal WU.
kasson
Pande Group Member
Posts: 1459
Joined: Thu Nov 29, 2007 9:37 pm

Re: 128.143.231.201 (BA) acting up?

Post by kasson »

I'm not sure what's going on. I'm going to take the server down until we can investigate properly.
kasson
Pande Group Member
Posts: 1459
Joined: Thu Nov 29, 2007 9:37 pm

Re: 128.143.231.201 (BA) acting up?

Post by kasson »

Ok, we fixed the root cause (a bunch of bad work units). The work server has a "feature" where it will resend prior assignments without checking if the work unit was stopped. So you may see some reassigns until this clears out. But there shouldn't be any 512-byte new assigns.
-alias-
Posts: 121
Joined: Sun Feb 22, 2009 1:20 pm

Re: 128.143.231.201 (BA) acting up?

Post by -alias- »

Looks like the work-server 128.143.231.201 is back to normal again. All my servers have now ul/dl workunits and are working just fine, and I hope they will stay like that for a long time. Big thanks to Kasson for his resolute action yesterday!
Post Reply