Folding Forum

Posted: **Fri Oct 13, 2017 8:34 pm**

What to do about this?

20:31:22:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:13800 run:0 clone:1481 gen:87 core:0xa7 unit:0x0000007280fccb0458a5fd0f2fc32df9
20:31:22:WU01:FS00:Uploading 16.64MiB to 128.252.203.4
20:31:22:WU01:FS00:Connecting to 128.252.203.4:8080
20:31:43:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80
20:31:43:WU01:FS00:Connecting to 128.252.203.4:80
20:32:04:WARNING:WU01:FS00:Exception: Failed to send results to work server: Failed to connect to 128.252.203.4:80: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.

Posted: **Fri Oct 13, 2017 8:59 pm**

The WS appears to be down. I will send a message to the person in charge of it.

Posted: **Fri Oct 13, 2017 9:26 pm**

Thanks!

Posted: **Fri Oct 13, 2017 9:27 pm**

There is a network hardware failure at WUSTL, they are currently working on fixing it. Hopefully to be fixed soon.

Posted: **Wed Oct 25, 2017 8:11 pm**

It took 3 minutes and 55 seconds to transfer 16.69MiB (PRCG13800 0-121-139) from me to the server. 8080 port was in use.

Folding Forum

Cannot Upload [WS 128.252.203.4]

Cannot Upload [WS 128.252.203.4]

Re: Cannot Upload

Re: Cannot Upload [WS 128.252.203.4]

Re: Cannot Upload [WS 128.252.203.4]

Re: Cannot Upload [WS 128.252.203.4]