Unable to upload to server 69.94.66.6

Moderators: Site Moderators, FAHC Science Team

PantherX
Site Moderator
Posts: 7020
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:

Re: Unable to upload to server 69.94.66.6

Post by PantherX »

sejtam wrote:...Doesn't F@H have a way to redirect results to another collection server?
It is up-to the Project Owner to set that up or not. It's entirely optional depending on the Infrastructure Setup (it varies per lab). Thus, it can get tricky.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
bruce
Posts: 20910
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Unable to upload to server 69.94.66.6

Post by bruce »

When a WS is rebooted, it tests which CS is available and makes a list. I don't know if new entries are added or when. When a WU is downloaded, it contains the address of the WS and a single CS. When the WU is uploaded, it only has one or two choices. The next WU assigned may have a different CS without any manual intervention.

There has been talk of enhancing FAHClient so it can have a 3rd choice but I don't think any work has been done on that idea. More work has been done on choosing CS locations to avoid common-mode failures (e.g. both servers on the same campus) and on weeding out unreliable hosts. Yes, it's disappointing when servers are less than 100% reliable but the CS only enters the picture when there's a problem with the primary WS.
Post Reply