WS 140.163.4.210 upload blocked by "untangle"

Moderators: Site Moderators, FAHC Science Team

Post Reply
Satori80
Posts: 1
Joined: Mon Feb 08, 2021 2:45 pm

WS 140.163.4.210 upload blocked by "untangle"

Post by Satori80 »

14:25:21:WU00:FS01:Trying to send results to collection server
14:25:21:WU00:FS01:Uploading 13.56MiB to 140.163.4.210
14:25:21:WU00:FS01:Connecting to 140.163.4.210:8080
14:25:22:WARNING:WU01:FS01:Exception: Failed to send results to work server: 10002: Received short response, expected 512 bytes, got 0
Neil-B
Posts: 2027
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon E5-2697v3@2.60GHz, 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon E3-1505Mv5@2.80GHz, 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: i7-960@3.20GHz, 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: WS 140.163.4.210 no upload possible

Post by Neil-B »

Welcome to the forums :)

You may want to check your firewall (untangle was the firewall in question below) ... I'll post below a discord post form someone with similar issues ... even though the firewall was allowing all traffic it was inspecting the flow and that caused this issue ... Once he turned that off all was fine.

Jason EllingsonToday at 11:24
Well... gee... figured out the problem. I set my firewall to pass all traffic... but apparently it still "inspects" port 80 traffic for compliance. Disabled that and voila! We're in business.
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
bruce
Posts: 20910
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: WS 140.163.4.210 no upload possible

Post by bruce »

These two posts must be part of some other topic ... which I have not located.
Post Reply