Project:7623 (Run 170, Clone 0, Gen 75)

[BikePsyco]

I'm still new to folding so bear with me as I try to explain myself. I just bought a new GTX 660, and in an effort to get it to work I tryed downloading the beta version of FAHcontrol. Well, it recognized the GPU now, but it won't start. So after more research I learned that Kepler's only work with the beta sets. Since I'm not on the beta team I figured I'd leave that to those who know more than I. But that leaves me with the problem, I know have a WU that I am unable to process. How do I send it back so that it is sent out to someone else?
03:30:31:WU03:FS01:FahCore returned: INTERRUPTED (102 = 0x66)
Is the error I see in the log. I have 7.2.9 FAHcontrol version.

And then about disabling the GPU slot, Going to Configure>Slots>GPU and clicking remove the right way to do it or is there a better way?

[bruce]

Welcome to foldingforum.org, BikePsyco.


If you remove the slot, V7 will recognize that the WU associated with that GPU cannot be processed. The WU will be deleted and assigned to someone else. (It's not a recommended procedure, but under the circumstances, you really don't have a choice.)

After you've done that, there's one more thing you can try. First, search through the log and find the segment where the WU for the GPU was downloaded and started. Post that segment.
Second, Pause any WU which might be folding. Delete the folder called "cores" which can be found in the data directory. Add the GPU slot back and there's a possibility that it might work. Post the segment of the log showing the new WU starting. I don't have any way to test it, myself, but if it doesn't work just delete the new slot again and you'll be no worse off than you are now. If it does work, GREAT.

[BikePsyco]

Here is everything for that GPU Slot in the log since I loaded 7.2.9. I will try your suggestions now to see if they work, and post the log in here.

Code: Select all

04:46:23:WU00:FS00:0x15:Folding@Home GPU Core
04:46:23:WU00:FS00:0x15:Version                2.22 (Thu Dec 8 17:08:05 PST 2011)
04:46:23:WU00:FS00:0x15:Build host             SimbiosNvdWin7
04:46:23:WU00:FS00:0x15:Board Type             NVIDIA/CUDA
04:46:23:WU00:FS00:0x15:Core                   15
04:46:23:WU00:FS00:0x15:
04:46:23:WU00:FS00:0x15:Window's signal control handler registered.
04:46:23:WU00:FS00:0x15:Preparing to commence simulation
04:46:23:WU00:FS00:0x15:- Looking at optimizations...
04:46:23:WU00:FS00:0x15:- Files status OK
04:46:23:WU00:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
04:46:23:WU00:FS00:0x15:- Expanded 124037 -> 501826 (decompressed 404.5 percent)
04:46:23:WU00:FS00:0x15:Called DecompressByteArray: compressed_data_size=124037 data_size=501826, decompressed_data_size=501826 diff=0
04:46:23:WU00:FS00:0x15:- Digital signature verified
04:46:23:WU00:FS00:0x15:
04:46:23:WU00:FS00:0x15:Project: 7623 (Run 170, Clone 0, Gen 75)
04:46:23:WU00:FS00:0x15:
04:46:23:WU00:FS00:0x15:Assembly optimizations on if available.
04:46:23:WU00:FS00:0x15:Entering M.D.
04:46:25:WU00:FS00:0x15:Tpr hash 00/wudata_01.tpr:  4138519777 1783653345 3423729072 149445924 3732455986
04:46:25:WU00:FS00:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
04:46:25:WU00:FS00:0x15:Working on Protein
04:46:25:WU00:FS00:0x15:Client config unavailable.
04:46:26:WU00:FS00:0x15:Starting GUI Server
04:46:28:FS00:Finishing
04:46:30:FS00:Paused
04:46:30:FS00:Shutting core down

04:46:33:WU00:FS00:0x15:Client no longer detected. Shutting down core 
04:46:33:WU00:FS00:0x15:
04:46:33:WU00:FS00:0x15:Folding@home Core Shutdown: CLIENT_DIED
04:46:33:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

Mod - Edited

[BikePsyco]

This is what it says when you add the slot. Same behavior as last time, acts like its going to work, card jumps to full speed but then doesn't do anything, no cpu or gpu load. I'll post the after pausing part in a seperate post.

Code: Select all

20:24:24:Adding folding slot 00: READY gpu:0:"GK106 [GeForce GTX 660]"
20:24:25:WU00:FS00:Connecting to assign-GPU.stanford.edu:80
20:24:25:Saving configuration to config.xml
20:24:25:<config>
20:24:25:  <!-- Folding Slot Configuration -->
20:24:25:  <gpu v='true'/>
20:24:25:
20:24:25:  <!-- Network -->
20:24:25:  <proxy v=':8080'/>
20:24:25:
20:24:25:  <!-- User Information -->
20:24:25:  <passkey v='********************************'/>
20:24:25:  <user v='BikePsyco'/>
20:24:25:
20:24:25:  <!-- Folding Slots -->
20:24:25:  <slot id='1' type='SMP'/>
20:24:25:  <slot id='0' type='GPU'/>
20:24:25:</config>
20:24:25:WU00:FS00:News: Welcome to Folding@Home
20:24:25:WU00:FS00:Assigned to work server 171.64.65.105
20:24:25:WU00:FS00:Requesting new work unit for slot 00: READY gpu:0:"GK106 [GeForce GTX 660]" from 171.64.65.105
20:24:25:WU00:FS00:Connecting to 171.64.65.105:8080
20:24:26:WU00:FS00:Downloading 122.22KiB
20:24:26:WU00:FS00:Download complete
20:24:26:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:7623 run:567 clone:0 gen:59 core:0x15 unit:0x0000005b664f2dd14fe4fba0c8a0635e
20:24:26:WU00:FS00:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah
20:24:26:WU00:FS00:Connecting to http://www.stanford.edu:80
20:24:26:WU00:FS00:FahCore 15: Downloading 1.49MiB
20:24:31:WU00:FS00:FahCore 15: Download complete
20:24:31:WU00:FS00:Valid core signature
20:24:31:WU00:FS00:Unpacked 4.47MiB to cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe
20:24:31:WU00:FS00:Starting
20:24:31:WU00:FS00:Running FahCore: C:\FAHClient/FAHCoreWrapper.exe C:/Users/Mike/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 00 -suffix 01 -version 702 -lifeline 3384 -checkpoint 15 -gpu 0
20:24:31:WU00:FS00:Started FahCore on PID 4476
20:24:32:WU00:FS00:Core PID:4472
20:24:32:WU00:FS00:FahCore 0x15 started
20:24:33:WU00:FS00:0x15:
20:24:33:WU00:FS00:0x15:*------------------------------*
20:24:33:WU00:FS00:0x15:Folding@Home GPU Core
20:24:33:WU00:FS00:0x15:Version                2.22 (Thu Dec 8 17:08:05 PST 2011)
20:24:33:WU00:FS00:0x15:Build host             SimbiosNvdWin7
20:24:33:WU00:FS00:0x15:Board Type             NVIDIA/CUDA
20:24:33:WU00:FS00:0x15:Core                   15
20:24:33:WU00:FS00:0x15:
20:24:33:WU00:FS00:0x15:Window's signal control handler registered.
20:24:33:WU00:FS00:0x15:Preparing to commence simulation
20:24:33:WU00:FS00:0x15:- Looking at optimizations...
20:24:33:WU00:FS00:0x15:DeleteFrameFiles: successfully deleted file=00/wudata_01.ckp
20:24:33:WU00:FS00:0x15:- Created dyn
20:24:33:WU00:FS00:0x15:- Files status OK
20:24:33:WU00:FS00:0x15:sizeof(CORE_PACKET_HDR) = 512 file=<>
20:24:33:WU00:FS00:0x15:- Expanded 124645 -> 501826 (decompressed 402.6 percent)
20:24:33:WU00:FS00:0x15:Called DecompressByteArray: compressed_data_size=124645 data_size=501826, decompressed_data_size=501826 diff=0
20:24:33:WU00:FS00:0x15:- Digital signature verified
20:24:33:WU00:FS00:0x15:
20:24:33:WU00:FS00:0x15:Project: 7623 (Run 567, Clone 0, Gen 59)
20:24:33:WU00:FS00:0x15:
20:24:33:WU00:FS00:0x15:Assembly optimizations on if available.
20:24:33:WU00:FS00:0x15:Entering M.D.
20:24:35:WU00:FS00:0x15:Tpr hash 00/wudata_01.tpr:  2460024749 3977408850 2491208191 76763900 3932168218
20:24:35:WU00:FS00:0x15:GPU device info: vendor=0 device=0 name=<NA> match=0
20:24:35:WU00:FS00:0x15:Working on Protein
20:24:35:WU00:FS00:0x15:Client config unavailable.
20:24:35:WU00:FS00:0x15:Starting GUI Server

Mod - Edited

[BikePsyco]

This is all it says after I paused it. I guess I will wait till they have the implementation of the kepler's figured out, and then try again.

20:32:11:FS00:Paused
20:32:12:FS00:Shutting core down
20:32:13:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

[P5-133XL]

You paused it only 8 minutes after it started. Whenever you pause it will always give those last three lines and then later when you unpause it should start back up again. May I suggest that you let it run a while longer to see if it actually progresses.

[Xavier Zepherious]

kepler not officially supported yet (in testing)

if bruce's advice doesn't work

1 remove the slot - wait til kepler (600 series) public supported and a new core release
2. join the beta team

[bruce]

Bruce's advice was amended above (delete the cores folder). It may be simpler than that. (I have not tested this rename process, so somebody please confirm or deny if it works.)
3. Rename the cores folder that's in the data directory. Pause the slot. Wait a bit. Resume folding.

The new version of the core should be available for advanced or released fah projects but it won't overwrite the old version yet. For those who might not see this suggestion, the automatic update should begin soon.

Don't ask to join the beta team unless you really do want to monitor your clients closely and give detailed reports of any anomalies.

[P5-133XL]

May I suggest that you pause the slot before renaming the cores folder. Then you should be able to restart the slot immediately without waiting as it should reconstruct the folder structure and auto-DL an appropriate core before running the WU in the slot.