Config section from log, as I know I'll get asked for it:
Code: Select all
15:42:49:<config>
15:42:49: <!-- Client Control -->
15:42:49: <fold-anon v='true'/>
15:42:49:
15:42:49: <!-- Folding Slot Configuration -->
15:42:49: <power v='full'/>
15:42:49:
15:42:49: <!-- HTTP Server -->
15:42:49: <allow v='127.0.0.1 192.168.1.24'/>
15:42:49:
15:42:49: <!-- Network -->
15:42:49: <proxy v=':8080'/>
15:42:49:
15:42:49: <!-- Remote Command Server -->
15:42:49: <command-allow-no-pass v='127.0.0.1 192.168.1.24'/>
15:42:49:
15:42:49: <!-- User Information -->
15:42:49: <passkey v='********************************'/>
15:42:49: <user v='[removed]'/>
15:42:49:
15:42:49: <!-- Folding Slots -->
15:42:49: <slot id='0' type='CPU'>
15:42:49: <cpus v='-1'/>
15:42:49: <next-unit-percentage v='100'/>
15:42:49: </slot>
15:42:49:</config>
Code: Select all
14:13:24:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:8585 run:1 clone:7 gen:62 core:0xa3 unit:0x000002100a3b1e5952288a25875cccb7
.
******************************* Date: 2013-10-20 *******************************
.
******************************* Date: 2013-10-24 *******************************
.
16:31:00:WU00:FS00:0xa3:Folding@home Core Shutdown: FINISHED_UNIT
16:31:42:WU00:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
16:31:42:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:8585 run:1 clone:7 gen:62 core:0xa3 unit:0x000002100a3b1e5952288a25875cccb7
16:31:42:WU00:FS00:Uploading 7.19MiB to 128.143.231.202
.
.
16:31:50:WU00:FS00:Server responded WORK_ACK (400)
16:31:50:WU00:FS00:Final credit estimate, 5225.00 points
Code: Select all
03:44:24:WU01:FS00:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:6099 run:3 clone:5 gen:483 core:0xa3 unit:0x000002ad0a3b1e594e889fb587c891d0
.
******************************* Date: 2013-10-25 *******************************
.
******************************* Date: 2013-10-28 *******************************
.
22:54:16:WU01:FS00:0xa3:Folding@home Core Shutdown: FINISHED_UNIT
22:54:58:WU01:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
22:54:58:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:6099 run:3 clone:5 gen:483 core:0xa3 unit:0x000002ad0a3b1e594e889fb587c891d0
22:54:58:WU01:FS00:Uploading 10.77MiB to 128.143.231.202
.
.
22:56:22:WU01:FS00:Upload complete
22:56:22:WU01:FS00:Server responded WORK_ACK (400)
22:56:22:WU01:FS00:Final credit estimate, 5048.00 points
As far as I can tell another WU from the same client was OK, and both the above were returned well within the timeout. Have I missed something or is there still a problem?