PPD Database - HFM exports needed

A forum for discussing FAH-related hardware choices and info on actual products (not speculation).

Moderator: Site Moderators

Forum rules
Please read the forum rules before posting.
NoMoreQuarantine
Posts: 182
Joined: Tue Apr 07, 2020 2:38 pm

Re: PPD Database - HFM exports needed

Post by NoMoreQuarantine »

I decided to see how extreme I can take my current folding rig in terms of performance/watt. I have spent some time to get the combined power usage of my CPU & GPU to about 160W (AKA less than 2 incandescent light bulbs). I lost about 19% performance on FAHBench with my GPU, while reducing my power draw by 50%. I have it folding now and will post results.
foldinghomealone
Posts: 130
Joined: Wed Feb 01, 2017 7:07 pm

Re: PPD Database - HFM exports needed

Post by foldinghomealone »

New HW entry: i7-8550U
foldinghomealone
Posts: 130
Joined: Wed Feb 01, 2017 7:07 pm

Re: PPD Database - HFM exports needed

Post by foldinghomealone »

New entries for:
i5-8400
i7-2600K
i7-8550U
R5 2600
RX 580
RX 590
RX Vega 64
Xeon E5649 @18t

Thanks to NoMoreQuarantine and AOD_N3URAL for the uploads.
I really appreciate the naming of the slots
foldinghomealone
Posts: 130
Joined: Wed Feb 01, 2017 7:07 pm

Re: PPD Database - HFM exports needed

Post by foldinghomealone »

Juggy wrote:
HaloJones wrote:I think to try to have all the possible variables accounted for is too much complication. OS, motherboard, cpu, gpu type, card maker, cooling spec, overclock settings, cooling, usage of machine while folding, Project, Run, Clone, Gen.

All this will do (which is still a lot) is give a range for a card that a potential buyer/user could expect.
Hmmm, for instance an OC card from XXX manufacturer may be $400 but from YYY may be $370.

There are lower priced manufacturers like Galax that still produce good kit.

Card manufacturer (Gigabyte)
Model Number (RTX 2080 Super)
Sub Model Number (Windfrorce OC)
Factory Clock Speed (1830MHz)

Surely that is not too much info?
If someone can give information in the CSV file like 'RTX 2080Ti @50% power limit' or sth. like this I will add this information in the new column Z.
When we have enough samples of such detailed information I will consider making an additional Table.
Currently there is not enough data/samples to do so.
I also think that manufacturer or Model number is too detailed. I think that clock speed would be enough information.
HaloJones
Posts: 920
Joined: Thu Jul 24, 2008 10:16 am

Re: PPD Database - HFM exports needed

Post by HaloJones »

Clock speed is a variable anyway. Both cpus and gpus auto-boost these days so without having it fixed, the clock frequencies would be all over the place.
single 1070

Image
foldinghomealone
Posts: 130
Joined: Wed Feb 01, 2017 7:07 pm

Re: PPD Database - HFM exports needed

Post by foldinghomealone »

HaloJones wrote:Clock speed is a variable anyway. Both cpus and gpus auto-boost these days so without having it fixed, the clock frequencies would be all over the place.
That's true. Didn't think about that.
NoMoreQuarantine
Posts: 182
Joined: Tue Apr 07, 2020 2:38 pm

Re: PPD Database - HFM exports needed

Post by NoMoreQuarantine »

HaloJones wrote:Clock speed is a variable anyway. Both cpus and gpus auto-boost these days so without having it fixed, the clock frequencies would be all over the place.
That said, there will be an average clock speed when under full load, depending on ambient temperature and cooling solutions. A single datapoint just isn't enought to fully characterize a processor. That would require a sweep of frequencies at various temperatures to map the 3d spectrum.
Image
HaloJones
Posts: 920
Joined: Thu Jul 24, 2008 10:16 am

Re: PPD Database - HFM exports needed

Post by HaloJones »

Good luck trying to get an accurate report of the average clock speed over the course of a work unit! Mean, mode or median?
single 1070

Image
NoMoreQuarantine
Posts: 182
Joined: Tue Apr 07, 2020 2:38 pm

Re: PPD Database - HFM exports needed

Post by NoMoreQuarantine »

HaloJones wrote:Good luck trying to get an accurate report of the average clock speed over the course of a work unit! Mean, mode or median?
Good point, that would require an all new process to monitor the clock speed during each WU. I was being hypothetical, not practical :)
Kebast
Posts: 386
Joined: Thu Aug 06, 2015 5:21 pm

Re: PPD Database - HFM exports needed

Post by Kebast »

I uploaded a new dataset. Couple of older/slower cards mixed in this one, plus a bunch of the GTX970.
Image
Ryzen 5900x 12T - RTX 4070 TI
Kebast
Posts: 386
Joined: Thu Aug 06, 2015 5:21 pm

Re: PPD Database - HFM exports needed

Post by Kebast »

Kebast wrote:I uploaded a new dataset. Couple of older/slower cards mixed in this one, plus a bunch of the GTX970.
oops, I messed up a slot name. Anything that says Ubuntu_GTX970 should say Ubuntu_GTX970-1442Mhz
Image
Ryzen 5900x 12T - RTX 4070 TI
foldinghomealone
Posts: 130
Joined: Wed Feb 01, 2017 7:07 pm

Re: PPD Database - HFM exports needed

Post by foldinghomealone »

@Kebast:
no worries.

I updated the db with following entries:
i3-4130 @2t
i5-8265U
i7-6700HQ @7t
R3 1200 @3t
RX 460
RX 570
GTX 970
GTX 1050
foldinghomealone
Posts: 130
Joined: Wed Feb 01, 2017 7:07 pm

Re: PPD Database - HFM exports needed

Post by foldinghomealone »

Thanks to NormalDiffusion:
Data from ... uploaded:
Titan Xp
GTX 1050Ti
GTX 1650Super
GTX 750
GTX 960
i7-4770
i7-6700
i9-7900X
Xeon E5-1620v4
Xeon E5-1650v4
Xeon E5-2690
foldinghomealone
Posts: 130
Joined: Wed Feb 01, 2017 7:07 pm

Re: PPD Database - HFM exports needed

Post by foldinghomealone »

Thanks to NoMoreQuarantine and Juggy
New updates for:
RTX 2080 Super
RX 590
Intel i9-9900FK
Ryzen 5 2600
Juggy
Posts: 111
Joined: Fri Mar 20, 2020 12:07 pm
Hardware configuration: Intel i9 9900KF @4.9GHZ
MSI Z390M Gaming OC
64GB G-Skill Ripjaw 3200
Gigabyte RTX2060 Super Gaming OC
NZXT Kraken X63 AIO
Corsair RM850
Samsung 1TB Evo Pro NVMe
Location: Qatar

Re: PPD Database - HFM exports needed

Post by Juggy »

foldinghomealone wrote:Thanks to NoMoreQuarantine and Juggy
New updates for:
RTX 2080 Super
RX 590
Intel i9-9900FK
Ryzen 5 2600
My mistake, I labelled the slot incorrectly. It should be i9-9900KF @12t and replace the existing dataset you have

Apologies.
Image
Image
Post Reply