Graphics card power cables to PSU

If you're new to FAH and need help getting started or you have very basic questions, start here.

Moderators: Site Moderators, FAHC Science Team

Graphics card power cables to PSU

Postby JetJaguar » Sat Apr 18, 2020 5:02 pm

Hello

I have a new (to me) GTX 1070. It came with this Y power cable: https://drive.google.com/file/d/1zNDQJ0kJOwaTgiiwyN1kIhb4kEXZ6wDo/view?usp=sharing

The black end goes into the graphics card, and the two whites are female, 6-pin. My PSU has 3 modular 6-pin PCI-E ports that match the white ends.

I have ordered two PCI-E 6-pin male/male cables. I plan to use them to connect the white ends of that Y cable to two of those ports on my PSU. Will that work, or will it overpower the graphics card? Should I instead get a corresponding Y cable to go from one port of the PSU and splits into two connectors for the pictured Y cable above?

thanks
JetJaguar
 
Posts: 13
Joined: Thu Apr 02, 2020 8:31 pm

Re: Graphics card power cables to PSU

Postby JimboPalmer » Sat Apr 18, 2020 5:19 pm

You will not over power the card. (you may draw too much power from your PSU, but generally, it would not have 3 power connectors if it could not supply them with power)
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
JimboPalmer
 
Posts: 2021
Joined: Mon Feb 16, 2009 5:12 am
Location: Greenwood MS USA

Re: Graphics card power cables to PSU

Postby Jesse_V » Sat Apr 18, 2020 5:24 pm

I don't know how the Y cable is wired or if its wiring is compatible with your PSU ports. It would be extremely unfortunate to use a $10 cable to fry the PSU or graphics card. There's too much money on the line to risk it, it my view. Second, PSUs are usually set up to run a single line, known as a rail, from one of the PSU ports to the graphics card. Sometimes the PSU can even tell you which port to use. It's often a really good idea to use the cables and wiring instructions that come with the PSU.
F@h is now the top computing platform on the planet and nothing unites people like a dedicated fight against a common enemy. This virus affects all of us. Lets end it together.
Jesse_V
Site Moderator
 
Posts: 2851
Joined: Mon Jul 18, 2011 5:44 am
Location: Western Washington

Re: Graphics card power cables to PSU

Postby lostcowboy » Tue Apr 21, 2020 8:04 pm

Hi, your power supply likely came with extra cables. You will likely find one that has an eight-pin connector, it may be split as six-pin and two-pin. you plug the two-pin part in first then the six-pin part. The six-pin locks the two-pin in place so it can't come out. That is what I am using on my RTX 2080, which works just fine.
lostcowboy
 
Posts: 5
Joined: Sat Mar 21, 2020 11:51 pm

Re: Graphics card power cables to PSU

Postby JetJaguar » Tue Apr 21, 2020 8:40 pm

I did order a cable from Aliexpress that claims to be for my brand and model of PSU. It's 6pin on one end and 6+2 on the other. I'll plug the 6 end into one of the 6-hole -modular ports of the PSU, and the 6+2 into the card, and ignore the Y-cable.
JetJaguar
 
Posts: 13
Joined: Thu Apr 02, 2020 8:31 pm


Return to New Donors start here

Who is online

Users browsing this forum: No registered users and 2 guests

cron