SMP Crash - Core A4 and PRCG 7200 (65, 8, 13)

Moderators: Site Moderators, PandeGroup

Re: SMP Crash - Core A4 and PRCG 7200 (65, 8, 13)

Postby csimon » Sat Mar 03, 2012 12:21 am

I'm getting this same (similar) crash as well.

"Assertion failed|Program F:\...\FAHControl.exe|File: cairo-surface.c|Line:860|Expression status==CAIRO_STATUS_SUCCESS"

AMD 1100T @ 3.8GHz | ASUS CH5 Formula | 2 x 4GB DDR3-1600MHz | EVGA GTX570 | OCZ 850W Zseries | Win7 x64 Pro SP1 | F@h V7.1.48

I've disabled the sleep function on the graphics card ...just to see if this helps. I've read where the 295.73 drivers are having issues.

edit:\ this didn't work ...I'm going back to 285.62 drivers.

Those drivers didn't work either. I crash as soon as both cpu & gpu are folding on V7 no matter what I do. I switched to V7gpu and V6cpu and so far good but still too early to tell.
CVF-Z (1801) | FX-8350 @ 4.6ghz @ 1.5v | cpu/nb @ 2600 @ 1.275v| ht @ 2600 | 8gb (2x4) Redlines (996997) @ DDR3-2133 (9-11-10-28-1T ) | GTX 770/GTX 570 PhysX | 850Z PSU
csimon
 
Posts: 60
Joined: Sun Feb 05, 2012 2:53 pm
Location: Louisiana

Re: SMP Crash - Core A4 and PRCG 7200 (65, 8, 13)

Postby Shadowmeph » Thu Nov 08, 2012 4:54 pm

I also have been getting this crash on my Main PC running a AMD 1100T no OC 2x4gb ram , My ram and everything on this system is ok
this is the pop up un hiden information
Code: Select all
 Problem Event Name:   APPCRASH
  Application Name:   FahCore_a4.exe
  Application Version:   0.0.0.0
  Application Timestamp:   4d23eafc
  Fault Module Name:   FahCore_a4.exe
  Fault Module Version:   0.0.0.0
  Fault Module Timestamp:   4d23eafc
  Exception Code:   c0000005
  Exception Offset:   003509d9
  OS Version:   6.2.9200.2.0.0.400.8
  Locale ID:   4105
  Additional Information 1:   5861
  Additional Information 2:   5861822e1919d7c014bbb064c64908b2
  Additional Information 3:   dac6
  Additional Information 4:   dac6c2650fa14dd558bd9f448e23afd1

the funny thing is that if I press the "close the program Fah will still run and then about 2 mins later I get the same pop up . but if I just leave the Pop up alonne and just minimize it to the task bar the fah will still run
Shadowmeph
 
Posts: 9
Joined: Tue Mar 10, 2009 6:34 pm

Re: SMP Crash - Core A4 and PRCG 7200 (65, 8, 13)

Postby Rolo » Thu Nov 08, 2012 5:34 pm

csimon, Why are you running old GPU drivers? You may want to try a clean install of 306.97 or 310.33 (I'm running the later on my 580).
Additionally, if you're having problems specifically and only when you SMP+GPU fold, I would look at power. Your model had issues with the ATX connector:
cf. http://www.jonnyguru.com/modules.php?na ... 2&reid=167
Because these numbers were anything but stable on the 3.3V and 5V rails. I had to keep poking and prodding at the ATX connector to get an accurate reading. Yes, friends, this unit has issues with the ATX connector pins. Big issues. In test five if I didn't hold down the wires to the connector, I would see massive drops on the 3.3V rail and only slightly less massive drops at 5V to the point they were out of ATX spec. OCZ needs to do some work here. Me, I'm going to tighten these pins for the hot tests.


Shadowmeph, how did you test your RAM to verify it is good?
Image
User avatar
Rolo
 
Posts: 33
Joined: Fri Oct 26, 2012 11:49 pm
Location: Pike's Peak

Re: SMP Crash - Core A4 and PRCG 7200 (65, 8, 13)

Postby Shadowmeph » Thu Nov 08, 2012 5:56 pm

I used two different mem tests one from the windows boot. but the second one was off of a Linux live cd which took a few hours to do
Shadowmeph
 
Posts: 9
Joined: Tue Mar 10, 2009 6:34 pm

Re: SMP Crash - Core A4 and PRCG 7200 (65, 8, 13)

Postby Rolo » Thu Nov 08, 2012 6:48 pm

I can't attest to those two but memtest86+ overnight is authoritative.

Perhaps check for a corrupt installation; run chkdsk /r (will take a while) or reinstall FAH.

Did you exclude FAH work directory from your security software?
User avatar
Rolo
 
Posts: 33
Joined: Fri Oct 26, 2012 11:49 pm
Location: Pike's Peak

Previous

Return to V7.1.52 Windows/Linux

Who is online

Users browsing this forum: No registered users and 1 guest

cron