Installed second video card, but only one is recognized

Moderators: Site Moderators, FAHC Science Team

Installed second video card, but only one is recognized

Postby melephant » Wed Nov 09, 2011 3:19 am

I recently added a GT 9600 Nvidia card to my sytem. The previous set up was a GTX 480 and SMP 12 which both worked well. After adding the second video card the first one is no longer avalaible for folding. I noticed previously when running BOINC that only one video card was running when both of them used to run. Whjat could I have possibly configured wrong to void the other card. This must be a motherboard or hardware issue. Both video cards show up in the device manager and are working correctly according to that.
melephant
 
Posts: 42
Joined: Sun Feb 24, 2008 9:23 am

Re: Installed second video card, but only one is recognized

Postby 7im » Wed Nov 09, 2011 3:36 am

Posting the ***System*** section of the log would help us diagnose the issue.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
User avatar
7im
 
Posts: 10189
Joined: Thu Nov 29, 2007 5:30 pm
Location: Arizona

Re: Installed second video card, but only one is recognized

Postby gwildperson » Wed Nov 09, 2011 4:35 am

With two different kinds of cards, you probably need to install the drivers again. Does Windows recognize both cards (i.e.-could you extend your desktop to two monitors if you wanted to? Doing so is no longer required, but it's a good validation test to see if you have good drivers for both cards.
gwildperson
 
Posts: 450
Joined: Tue Dec 04, 2007 9:36 pm

Re: Installed second video card, but only one is recognized

Postby melephant » Thu Nov 10, 2011 9:28 pm

Im added a dummy plug to the second GPU and now Ver 7 identifies both video cards correctly. However, even though they are running according to the status, neither one is folding.
melephant
 
Posts: 42
Joined: Sun Feb 24, 2008 9:23 am

Re: Installed second video card, but only one is recognized

Postby 7im » Thu Nov 10, 2011 11:03 pm

Still waiting for the system info...
User avatar
7im
 
Posts: 10189
Joined: Thu Nov 29, 2007 5:30 pm
Location: Arizona

Re: Installed second video card, but only one is recognized

Postby melephant » Fri Nov 11, 2011 2:29 am

Code: Select all
01:26:18:Unit 00:
01:26:18:Unit 02:
01:26:18:Unit 01:Board Type             NVIDIA/CUDA
01:26:18:Unit 00:Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
01:26:18:Unit 02:*------------------------------*
01:26:18:Unit 01:Core                   15
01:26:18:Unit 00:Build host: amoeba
01:26:18:Unit 02:Folding@Home Gromacs GB Core
01:26:18:Unit 01:GPU device id          1
01:26:18:Unit 00:Board Type: Nvidia
01:26:18:Unit 02:Version 2.27 (Dec. 15, 2010)
01:26:18:Unit 01:
01:26:18:Unit 00:Core      :
01:26:18:Unit 02:
01:26:18:Unit 01:Window's signal control handler registered.
01:26:18:Unit 00:Preparing to commence simulation
01:26:18:Unit 02:Preparing to commence simulation
01:26:18:Unit 01:Preparing to commence simulation
01:26:18:Unit 00:- Ensuring status. Please wait.
01:26:18:Unit 02:- Ensuring status. Please wait.
01:26:18:Unit 01:- Ensuring status. Please wait.
01:26:21:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1
01:26:27:Unit 01:- Looking at optimizations...
01:26:27:Unit 00:- Looking at optimizations...
01:26:27:Unit 02:- Looking at optimizations...
01:26:27:Unit 01:- Working with standard loops on this execution.
01:26:27:Unit 00:- Working with standard loops on this execution.
01:26:27:Unit 02:- Working with standard loops on this execution.
01:26:27:Unit 01:- Previous termination of core was improper.
01:26:27:Unit 00:- Previous termination of core was improper.
01:26:27:Unit 02:- Previous termination of core was improper.
01:26:27:Unit 01:- Going to use standard loops.
01:26:27:Unit 00:- Going to use standard loops.
01:26:27:Unit 02:- Going to use standard loops.
01:26:27:Unit 01:- Files status OK
01:26:27:Unit 00:- Files status OK
01:26:27:Unit 02:- Files status OK
01:26:27:Unit 01:sizeof(CORE_PACKET_HDR) = 512 file=<>
01:26:27:Unit 00:- Expanded 62876 -> 336799 (decompressed 535.6 percent)
01:26:27:Unit 01:- Expanded 43683 -> 170279 (decompressed 389.8 percent)
01:26:27:Unit 00:Called DecompressByteArray: compressed_data_size=62876 data_size=336799, decompressed_data_size=336799 diff=0
01:26:27:Unit 01:Called DecompressByteArray: compressed_data_size=43683 data_size=170279, decompressed_data_size=170279 diff=0
01:26:27:Unit 00:- Digital signature verified
01:26:27:Unit 01:- Digital signature verified
01:26:27:Unit 00:
01:26:27:Unit 01:
01:26:27:Unit 00:Project: 10504 (Run 273, Clone 1, Gen 206)
01:26:27:Unit 01:Project: 6804 (Run 5, Clone 40, Gen 528)
01:26:27:Unit 00:
01:26:27:Unit 01:
01:26:27:Unit 00:Entering M.D.
01:26:27:Unit 01:Entering M.D.
01:26:27:Unit 02:- Expanded 1353668 -> 2552108 (decompressed 188.5 percent)
01:26:27:Unit 02:Called DecompressByteArray: compressed_data_size=1353668 data_size=2552108, decompressed_data_size=2552108 diff=0
01:26:27:Unit 02:- Digital signature verified
01:26:27:Unit 02:
01:26:27:Unit 02:Project: 7905 (Run 49, Clone 13, Gen 0)
01:26:27:Unit 02:
01:26:27:Unit 02:Entering M.D.
01:26:29:Unit 01:Tpr hash 01/wudata_01.tpr:  2589070362 1193363170 3976420354 184496337 1589774075
01:26:29:Unit 01:calling fah_main gpuDeviceId=1
01:26:29:Unit 01:Working on ALZHEIMER'S DISEASE AMYLOID
01:26:29:Unit 01:Client config unavailable.
01:26:29:Unit 01:Starting GUI Server
01:26:33:Unit 00:Tpr hash 00/wudata_01.tpr:  1445216497 3810864370 1215144155 3679927271 1145158563
01:26:33:Unit 02:Mapping NT from 12 to 12
01:26:33:Unit 00:
01:26:33:Unit 00:Calling fah_main args: 14 usage=100
01:26:33:Unit 00:
01:26:34:Unit 02:Completed 0 out of 500000 steps  (0%)


Mod Edit: Added Code Tags - PantherX
melephant
 
Posts: 42
Joined: Sun Feb 24, 2008 9:23 am

Re: Installed second video card, but only one is recognized

Postby bruce » Fri Nov 11, 2011 2:39 am

That's not what we need.

If you're looking at the log through FAHControl, do a Reload and then scroll back to the very top. You may need two screens to cover from the beginning to where it says Trying to access database.../Successfully acquired database lock. If you're copying from the log file in the data directory, we need exactly that same information.
bruce
 
Posts: 20140
Joined: Thu Nov 29, 2007 11:13 pm
Location: So. Cal.

Re: Installed second video card, but only one is recognized

Postby 7im » Fri Nov 11, 2011 2:42 am

System info... has gpu info we need.

Code: Select all
01:11:43:******************************* SYSTEM ********************************
01:11:43:          CPU: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
01:11:43:       CPU ID: GenuineIntel Family 6 Model 23 Stepping 10
01:11:43:         CPUs: 2
01:11:43:       Memory: 3.21GiB
01:11:43:  Free Memory: 2.16GiB
01:11:43:      Threads: WINDOWS_THREADS
01:11:43:   On Battery: false
01:11:43:   UTC offset: -7
01:11:43:          PID: 1576
01:11:43:          CWD: C:/Documents and Settings/Guido Fawkes/Application Data/FAHClient
01:11:43:           OS: Microsoft Windows XP Service Pack 3
01:11:43:      OS Arch: X86
01:11:43:         GPUs: 0                  <--------------------
01:11:43:         CUDA: Not detected         
01:11:43:Win32 Service: false
01:11:43:***********************************************************************
User avatar
7im
 
Posts: 10189
Joined: Thu Nov 29, 2007 5:30 pm
Location: Arizona

Re: Installed second video card, but only one is recognized

Postby melephant » Fri Nov 11, 2011 5:10 am

If this isn't it, tell me exactly where to find it. I uninstalled and reinstalled v 7 because it kept giving the same log file as I gave you.
Code: Select all
04:01:52:Requesting new work unit for slot 00: READY gpu:0:"G94 [GeForce 9600 GT]" from 171.67.108.21
04:01:52:Connecting to 171.67.108.21:8080
04:01:53:Slot 01: Downloading 44.21KiB
04:01:53:Slot 00: Downloading 61.88KiB
04:01:53:Slot 01: Download complete
04:01:53:Received Unit: id:01 state:DOWNLOAD error:OK project:6804 run:15 clone:68 gen:430 core:0x15 unit:0x000001bd6652edc64e03a0fe9eeb6e25
04:01:53:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah
04:01:53:Connecting to http://www.stanford.edu:80
04:01:53:Slot 00: Download complete
04:01:53:Received Unit: id:00 state:DOWNLOAD error:OK project:10504 run:319 clone:0 gen:287 core:0x11 unit:0x000002f76652eda54b75b190000088e0
04:01:53:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah
04:01:53:Connecting to http://www.stanford.edu:80
04:01:53:FahCore 15: Downloading 1.47MiB
04:01:54:FahCore 11: Downloading 648.82KiB
04:01:55:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1
04:01:55:News: Welcome to Folding@Home
04:01:55:Assigned to work server 129.74.85.15
04:01:55:Requesting new work unit for slot 02: READY smp:12 from 129.74.85.15
04:01:55:Connecting to 129.74.85.15:8080
04:01:55:Slot 02: Downloading 52.49KiB
04:01:56:Slot 02: Download complete
04:01:56:Received Unit: id:02 state:DOWNLOAD error:OK project:7007 run:1 clone:29 gen:71 core:0xa4 unit:0x000000ef0001329c4dfb908e5d06bdc3
04:01:56:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah
04:01:56:Connecting to http://www.stanford.edu:80
04:01:56:FahCore 11: Download complete
04:01:56:FahCore a4: Downloading 2.89MiB
04:01:56:Valid core signature
04:01:56:Unpacked 1.82MiB to cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe
04:01:56:Starting Unit 00
04:01:56:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 00 -suffix 01 -lifeline 5576 -version 701 -checkpoint 15 -gpu 0
04:01:56:Started core on PID 3044
04:01:56:FahCore 0x11 started
04:01:57:Unit 00:
04:01:57:Unit 00:*------------------------------*
04:01:57:Unit 00:Folding@Home GPU Core
04:01:57:Unit 00:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
04:01:57:Unit 00:
04:01:57:Unit 00:Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
04:01:57:Unit 00:Build host: amoeba
04:01:57:Unit 00:Board Type: Nvidia
04:01:57:Unit 00:Core      :
04:01:57:Unit 00:Preparing to commence simulation
04:01:57:Unit 00:- Looking at optimizations...
04:01:57:Unit 00:DeleteFrameFiles: successfully deleted file=00/wudata_01.ckp
04:01:57:Unit 00:- Created dyn
04:01:57:Unit 00:- Files status OK
04:01:57:Unit 00:- Expanded 62854 -> 336799 (decompressed 535.8 percent)
04:01:57:Unit 00:Called DecompressByteArray: compressed_data_size=62854 data_size=336799, decompressed_data_size=336799 diff=0
04:01:57:Unit 00:- Digital signature verified
04:01:57:Unit 00:
04:01:57:Unit 00:Project: 10504 (Run 319, Clone 0, Gen 287)
04:01:57:Unit 00:
04:01:57:Unit 00:Assembly optimizations on if available.
04:01:57:Unit 00:Entering M.D.
04:01:58:FahCore 15: Download complete
04:01:58:Valid core signature
04:01:58:Unpacked 4.40MiB to cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe
04:01:58:Starting Unit 01
04:01:58:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -lifeline 5576 -version 701 -checkpoint 15 -gpu 1
04:01:58:Started core on PID 6800
04:01:58:FahCore 0x15 started
04:01:59:Unit 01:
04:01:59:Unit 01:*------------------------------*
04:01:59:Unit 01:Folding@Home GPU Core
04:01:59:Unit 01:Version                2.20 (Tue Aug 2 12:06:37 PDT 2011)
04:01:59:Unit 01:Build host             SimbiosNvdWin7
04:01:59:Unit 01:Board Type             NVIDIA/CUDA
04:01:59:Unit 01:Core                   15
04:01:59:Unit 01:GPU device id          1
04:01:59:Unit 01:
04:01:59:Unit 01:Window's signal control handler registered.
04:01:59:Unit 01:Preparing to commence simulation
04:01:59:Unit 01:- Looking at optimizations...
04:01:59:Unit 01:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
04:01:59:Unit 01:- Created dyn
04:01:59:Unit 01:- Files status OK
04:01:59:Unit 01:sizeof(CORE_PACKET_HDR) = 512 file=<>
04:01:59:Unit 01:- Expanded 44762 -> 170279 (decompressed 380.4 percent)
04:01:59:Unit 01:Called DecompressByteArray: compressed_data_size=44762 data_size=170279, decompressed_data_size=170279 diff=0
04:01:59:Unit 01:- Digital signature verified
04:01:59:Unit 01:
04:01:59:Unit 01:Project: 6804 (Run 15, Clone 68, Gen 430)
04:01:59:Unit 01:
04:01:59:Unit 01:Assembly optimizations on if available.
04:01:59:Unit 01:Entering M.D.
04:02:01:Unit 01:Tpr hash 01/wudata_01.tpr:  1298217322 2856057250 2808705497 3718013368 2433894363
04:02:01:Unit 01:calling fah_main gpuDeviceId=1
04:02:01:Unit 01:Working on ALZHEIMER'S DISEASE AMYLOID
04:02:01:Unit 01:Client config unavailable.
04:02:01:Unit 01:Starting GUI Server
04:02:02:FahCore a4: 59.79%
04:02:03:Unit 00:Tpr hash 00/wudata_01.tpr:  261460189 2234769035 1512277183 342947789 808027929
04:02:03:Unit 00:
04:02:03:Unit 00:Calling fah_main args: 14 usage=100
04:02:03:Unit 00:
04:02:05:FahCore a4: Download complete
04:02:05:Valid core signature
04:02:05:Unpacked 9.59MiB to cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe
04:02:05:Starting Unit 02
04:02:05:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 02 -suffix 01 -lifeline 5576 -version 701 -checkpoint 15 -np 12
04:02:05:Started core on PID 6808
04:02:05:FahCore 0xa4 started
04:02:06:Unit 02:
04:02:06:Unit 02:*------------------------------*
04:02:06:Unit 02:Folding@Home Gromacs GB Core
04:02:06:Unit 02:Version 2.27 (Dec. 15, 2010)
04:02:06:Unit 02:
04:02:06:Unit 02:Preparing to commence simulation
04:02:06:Unit 02:- Looking at optimizations...
04:02:06:Unit 02:- Created dyn
04:02:06:Unit 02:- Files status OK
04:02:06:Unit 02:- Expanded 53239 -> 207472 (decompressed 389.6 percent)
04:02:06:Unit 02:Called DecompressByteArray: compressed_data_size=53239 data_size=207472, decompressed_data_size=207472 diff=0
04:02:06:Unit 02:- Digital signature verified
04:02:06:Unit 02:
04:02:06:Unit 02:Project: 7007 (Run 1, Clone 29, Gen 71)
04:02:06:Unit 02:
04:02:06:Unit 02:Assembly optimizations on if available.
04:02:06:Unit 02:Entering M.D.
04:02:12:Unit 02:Mapping NT from 12 to 12
04:02:12:Unit 02:Completed 0 out of 10000000 steps  (0%)
04:03:49:Unit 02:Completed 100000 out of 10000000 steps  (1%)
04:05:59:Unit 02:Completed 200000 out of 10000000 steps  (2%)
04:06:52:Downloading project 6804 description
04:06:52:Connecting to fah-web.stanford.edu:80
04:06:53:Downloading project 7007 description
04:06:53:Connecting to fah-web.stanford.edu:80
04:06:53:Downloading project 10504 description
04:06:53:Connecting to fah-web.stanford.edu:80
04:07:38:Unit 02:Completed 300000 out of 10000000 steps  (3%)
04:09:16:Unit 02:Completed 400000 out of 10000000 steps  (4%)


Mod Edit: Added Code Tags - PantherX
melephant
 
Posts: 42
Joined: Sun Feb 24, 2008 9:23 am

Re: Installed second video card, but only one is recognized

Postby melephant » Fri Nov 11, 2011 5:14 am

I could not figure out how to copy system info but I noted the GPU's your arrow pointed to said 2 and that both GPU's were identified correctly there.
melephant
 
Posts: 42
Joined: Sun Feb 24, 2008 9:23 am

Re: Installed second video card, but only one is recognized

Postby bruce » Fri Nov 11, 2011 7:08 am

As I said earlier, there are two ways to find the required information.

Method 1) If FAHControl is running, click on the log tab, then the Reload button on the far right. Wait for it to finish refreshing. Scroll back to the very top. Copy the first two screens into a post so that you cover everything from the beginning of the log to where it says Trying to access database.../Successfully acquired database lock.

Method 2) Open the data directory. If you're in Windows, there's a shortcut under All programs + FAHClient that opens the data directory. In it, you'll find a file called log.txt which you can open. Copy exactly that same information to your post.
bruce
 
Posts: 20140
Joined: Thu Nov 29, 2007 11:13 pm
Location: So. Cal.

Re: Installed second video card, but only one is recognized

Postby melephant » Sat Nov 12, 2011 12:19 am

Code: Select all
*********************** Log Started 2011-11-11T04:01:52 ************************
04:01:52:************************* Folding@home Client *************************
04:01:52:      Website: http://folding.stanford.edu/
04:01:52:    Copyright: (c) 2009-2011 Stanford University
04:01:52:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
04:01:52:         Args: --lifeline 6044 --command-port=36330
04:01:52:       Config: C:/Users/Mel/AppData/Roaming/FAHClient/config.xml
04:01:52:******************************** Build ********************************
04:01:52:      Version: 7.1.38
04:01:52:         Date: Oct 6 2011
04:01:52:         Time: 19:57:04
04:01:52:      SVN Rev: 3080
04:01:52:       Branch: fah/trunk/client
04:01:52:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
04:01:52:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
04:01:52:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT
04:01:52:     Platform: win32 XP
04:01:52:         Bits: 32
04:01:52:         Mode: Release
04:01:52:******************************* System ********************************
04:01:52:          CPU: Intel(R) Core(TM) i7 CPU 980 @ 3.33GHz
04:01:52:       CPU ID: GenuineIntel Family 6 Model 44 Stepping 2
04:01:52:         CPUs: 12
04:01:52:       Memory: 11.99GiB
04:01:52:  Free Memory: 7.28GiB
04:01:52:      Threads: WINDOWS_THREADS
04:01:52:   On Battery: false
04:01:52:   UTC offset: -6
04:01:52:          PID: 5576
04:01:52:          CWD: C:/Users/Mel/AppData/Roaming/FAHClient
04:01:52:           OS: Windows 7 Home Premium
04:01:52:      OS Arch: AMD64
04:01:52:         GPUs: 2
04:01:52:        GPU 0: NVIDIA:1 G94 [GeForce 9600 GT]
04:01:52:        GPU 1: FERMI:1 GF100 [GeForce GTX 480]
04:01:52:         CUDA: 2.0
04:01:52:  CUDA Driver: 4010
04:01:52:Win32 Service: false
04:01:52:***********************************************************************
04:01:52:<config>
04:01:52:  <!-- Folding Slot Configuration -->
04:01:52:  <gpu v='true'/>
04:01:52:
04:01:52:  <!-- User Information -->
04:01:52:  <passkey v='********************************'/>
04:01:52:  <team v='12867'/>
04:01:52:  <user v='Mel_Stark'/>
04:01:52:
04:01:52:  <!-- Folding Slots -->
04:01:52:</config>
04:01:52:Trying to access database...
04:01:52:Successfully acquired database lock
04:01:52:Enabled folding slot 00: READY gpu:0:"G94 [GeForce 9600 GT]"
04:01:52:Enabled folding slot 01: READY gpu:1:"GF100 [GeForce GTX 480]"
04:01:52:Enabled folding slot 02: READY smp:12
04:01:52:Connecting to assign-GPU.stanford.edu:80
04:01:52:Connecting to assign-GPU.stanford.edu:80
04:01:52:Connecting to assign-GPU.stanford.edu:80
04:01:52:Connecting to assign3.stanford.edu:8080
04:01:52:Connecting to assign-GPU.stanford.edu:80
04:01:52:Connecting to assign-GPU.stanford.edu:80
04:01:52:News: Welcome to Folding@Home
04:01:52:Assigned to work server 171.67.108.54
04:01:52:Requesting new work unit for slot 01: READY gpu:1:"GF100 [GeForce GTX 480]" from 171.67.108.54
04:01:52:News: Welcome to Folding@Home
04:01:52:Connecting to 171.67.108.54:8080
04:01:52:Assigned to work server 171.67.108.21
04:01:52:Requesting new work unit for slot 00: READY gpu:0:"G94 [GeForce 9600 GT]" from 171.67.108.21
04:01:52:Connecting to 171.67.108.21:8080
04:01:53:Slot 01: Downloading 44.21KiB
04:01:53:Slot 00: Downloading 61.88KiB
04:01:53:Slot 01: Download complete
04:01:53:Received Unit: id:01 state:DOWNLOAD error:OK project:6804 run:15 clone:68 gen:430 core:0x15 unit:0x000001bd6652edc64e03a0fe9eeb6e25
04:01:53:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah
04:01:53:Connecting to http://www.stanford.edu:80
04:01:53:Slot 00: Download complete
04:01:53:Received Unit: id:00 state:DOWNLOAD error:OK project:10504 run:319 clone:0 gen:287 core:0x11 unit:0x000002f76652eda54b75b190000088e0
04:01:53:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah
04:01:53:Connecting to http://www.stanford.edu:80
04:01:53:FahCore 15: Downloading 1.47MiB
04:01:54:FahCore 11: Downloading 648.82KiB
04:01:55:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1
04:01:55:News: Welcome to Folding@Home
04:01:55:Assigned to work server 129.74.85.15
04:01:55:Requesting new work unit for slot 02: READY smp:12 from 129.74.85.15
04:01:55:Connecting to 129.74.85.15:8080
04:01:55:Slot 02: Downloading 52.49KiB
04:01:56:Slot 02: Download complete
04:01:56:Received Unit: id:02 state:DOWNLOAD error:OK project:7007 run:1 clone:29 gen:71 core:0xa4 unit:0x000000ef0001329c4dfb908e5d06bdc3
04:01:56:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah
04:01:56:Connecting to http://www.stanford.edu:80
04:01:56:FahCore 11: Download complete
04:01:56:FahCore a4: Downloading 2.89MiB
04:01:56:Valid core signature
04:01:56:Unpacked 1.82MiB to cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe
04:01:56:Starting Unit 00
04:01:56:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 00 -suffix 01 -lifeline 5576 -version 701 -checkpoint 15 -gpu 0
04:01:56:Started core on PID 3044
04:01:56:FahCore 0x11 started
04:01:57:Unit 00:
04:01:57:Unit 00:*------------------------------*
04:01:57:Unit 00:Folding@Home GPU Core
04:01:57:Unit 00:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
04:01:57:Unit 00:
04:01:57:Unit 00:Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
04:01:57:Unit 00:Build host: amoeba
04:01:57:Unit 00:Board Type: Nvidia
04:01:57:Unit 00:Core      :
04:01:57:Unit 00:Preparing to commence simulation
04:01:57:Unit 00:- Looking at optimizations...
04:01:57:Unit 00:DeleteFrameFiles: successfully deleted file=00/wudata_01.ckp
04:01:57:Unit 00:- Created dyn
04:01:57:Unit 00:- Files status OK
04:01:57:Unit 00:- Expanded 62854 -> 336799 (decompressed 535.8 percent)
04:01:57:Unit 00:Called DecompressByteArray: compressed_data_size=62854 data_size=336799, decompressed_data_size=336799 diff=0
04:01:57:Unit 00:- Digital signature verified
04:01:57:Unit 00:
04:01:57:Unit 00:Project: 10504 (Run 319, Clone 0, Gen 287)
04:01:57:Unit 00:
04:01:57:Unit 00:Assembly optimizations on if available.
04:01:57:Unit 00:Entering M.D.
04:01:58:FahCore 15: Download complete
04:01:58:Valid core signature
04:01:58:Unpacked 4.40MiB to cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe
04:01:58:Starting Unit 01
04:01:58:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -lifeline 5576 -version 701 -checkpoint 15 -gpu 1
04:01:58:Started core on PID 6800
04:01:58:FahCore 0x15 started
04:01:59:Unit 01:
04:01:59:Unit 01:*------------------------------*
04:01:59:Unit 01:Folding@Home GPU Core
04:01:59:Unit 01:Version                2.20 (Tue Aug 2 12:06:37 PDT 2011)
04:01:59:Unit 01:Build host             SimbiosNvdWin7
04:01:59:Unit 01:Board Type             NVIDIA/CUDA
04:01:59:Unit 01:Core                   15
04:01:59:Unit 01:GPU device id          1
04:01:59:Unit 01:
04:01:59:Unit 01:Window's signal control handler registered.
04:01:59:Unit 01:Preparing to commence simulation
04:01:59:Unit 01:- Looking at optimizations...
04:01:59:Unit 01:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
04:01:59:Unit 01:- Created dyn
04:01:59:Unit 01:- Files status OK
04:01:59:Unit 01:sizeof(CORE_PACKET_HDR) = 512 file=<>
04:01:59:Unit 01:- Expanded 44762 -> 170279 (decompressed 380.4 percent)
04:01:59:Unit 01:Called DecompressByteArray: compressed_data_size=44762 data_size=170279, decompressed_data_size=170279 diff=0
04:01:59:Unit 01:- Digital signature verified
04:01:59:Unit 01:
04:01:59:Unit 01:Project: 6804 (Run 15, Clone 68, Gen 430)
04:01:59:Unit 01:
04:01:59:Unit 01:Assembly optimizations on if available.
04:01:59:Unit 01:Entering M.D.
04:02:01:Unit 01:Tpr hash 01/wudata_01.tpr:  1298217322 2856057250 2808705497 3718013368 2433894363
04:02:01:Unit 01:calling fah_main gpuDeviceId=1
04:02:01:Unit 01:Working on ALZHEIMER'S DISEASE AMYLOID
04:02:01:Unit 01:Client config unavailable.
04:02:01:Unit 01:Starting GUI Server
04:02:02:FahCore a4: 59.79%
04:02:03:Unit 00:Tpr hash 00/wudata_01.tpr:  261460189 2234769035 1512277183 342947789 808027929
04:02:03:Unit 00:
04:02:03:Unit 00:Calling fah_main args: 14 usage=100
04:02:03:Unit 00:
04:02:05:FahCore a4: Download complete
04:02:05:Valid core signature
04:02:05:Unpacked 9.59MiB to cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe
04:02:05:Starting Unit 02
04:02:05:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 02 -suffix 01 -lifeline 5576 -version 701 -checkpoint 15 -np 12
04:02:05:Started core on PID 6808
04:02:05:FahCore 0xa4 started
04:02:06:Unit 02:
04:02:06:Unit 02:*------------------------------*
04:02:06:Unit 02:Folding@Home Gromacs GB Core
04:02:06:Unit 02:Version 2.27 (Dec. 15, 2010)
04:02:06:Unit 02:
04:02:06:Unit 02:Preparing to commence simulation
04:02:06:Unit 02:- Looking at optimizations...
04:02:06:Unit 02:- Created dyn
04:02:06:Unit 02:- Files status OK
04:02:06:Unit 02:- Expanded 53239 -> 207472 (decompressed 389.6 percent)
04:02:06:Unit 02:Called DecompressByteArray: compressed_data_size=53239 data_size=207472, decompressed_data_size=207472 diff=0
04:02:06:Unit 02:- Digital signature verified
04:02:06:Unit 02:
04:02:06:Unit 02:Project: 7007 (Run 1, Clone 29, Gen 71)
04:02:06:Unit 02:
04:02:06:Unit 02:Assembly optimizations on if available.
04:02:06:Unit 02:Entering M.D.
04:02:12:Unit 02:Mapping NT from 12 to 12
04:02:12:Unit 02:Completed 0 out of 10000000 steps  (0%)
04:03:49:Unit 02:Completed 100000 out of 10000000 steps  (1%)
04:05:59:Unit 02:Completed 200000 out of 10000000 steps  (2%)
04:06:52:Downloading project 6804 description
04:06:52:Connecting to fah-web.stanford.edu:80
04:06:53:Downloading project 7007 description
04:06:53:Connecting to fah-web.stanford.edu:80
04:06:53:Downloading project 10504 description
04:06:53:Connecting to fah-web.stanford.edu:80
04:07:38:Unit 02:Completed 300000 out of 10000000 steps  (3%)
04:09:16:Unit 02:Completed 400000 out of 10000000 steps  (4%)
04:11:07:Unit 02:Completed 500000 out of 10000000 steps  (5%)
04:12:49:Unit 02:Completed 600000 out of 10000000 steps  (6%)
04:14:26:Unit 02:Completed 700000 out of 10000000 steps  (7%)
04:16:03:Unit 02:Completed 800000 out of 10000000 steps  (8%)
04:17:42:Unit 02:Completed 900000 out of 10000000 steps  (9%)
04:19:18:Unit 02:Completed 1000000 out of 10000000 steps  (10%)
04:21:06:Unit 02:Completed 1100000 out of 10000000 steps  (11%)
04:22:43:Unit 02:Completed 1200000 out of 10000000 steps  (12%)
04:25:33:Slot 01 paused
04:25:33:Slot 01: shutting core down
04:25:36:Slot 00 paused
04:25:37:Slot 00: shutting core down
04:26:13:Unit 02:Completed 1300000 out of 10000000 steps  (13%)
04:26:34:WARNING: Killing Unit 01
04:26:34:FahCore, running Unit 01, terminated.
04:26:38:WARNING: Killing Unit 00
04:26:41:FahCore, running Unit 00, terminated.
04:29:25:Unit 02:Completed 1400000 out of 10000000 steps  (14%)
04:31:56:Unit 02:Completed 1500000 out of 10000000 steps  (15%)
04:33:30:Unit 02:Completed 1600000 out of 10000000 steps  (16%)
04:33:35:Slot 00 unpaused
04:33:35:Starting Unit 00
04:33:35:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 00 -suffix 01 -lifeline 5576 -version 701 -checkpoint 15 -gpu 0
04:33:35:Started core on PID 2448
04:33:35:FahCore 0x11 started
04:33:36:Unit 00:
04:33:36:Unit 00:*------------------------------*
04:33:36:Unit 00:Folding@Home GPU Core
04:33:36:Unit 00:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
04:33:36:Unit 00:
04:33:36:Unit 00:Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
04:33:36:Unit 00:Build host: amoeba
04:33:36:Unit 00:Board Type: Nvidia
04:33:36:Unit 00:Core      :
04:33:36:Unit 00:Preparing to commence simulation
04:33:36:Unit 00:- Ensuring status. Please wait.
04:33:38:Slot 01 unpaused
04:33:38:Starting Unit 01
04:33:38:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -lifeline 5576 -version 701 -checkpoint 15 -gpu 1
04:33:38:Started core on PID 4048
04:33:38:FahCore 0x15 started
04:33:39:Unit 01:
04:33:39:Unit 01:*------------------------------*
04:33:39:Unit 01:Folding@Home GPU Core
04:33:39:Unit 01:Version                2.20 (Tue Aug 2 12:06:37 PDT 2011)
04:33:39:Unit 01:Build host             SimbiosNvdWin7
04:33:39:Unit 01:Board Type             NVIDIA/CUDA
04:33:39:Unit 01:Core                   15
04:33:39:Unit 01:GPU device id          1
04:33:39:Unit 01:
04:33:39:Unit 01:Window's signal control handler registered.
04:33:39:Unit 01:Preparing to commence simulation
04:33:39:Unit 01:- Ensuring status. Please wait.
04:33:45:Unit 00:- Looking at optimizations...
04:33:45:Unit 00:- Working with standard loops on this execution.
04:33:45:Unit 00:- Previous termination of core was improper.
04:33:45:Unit 00:- Files status OK
04:33:45:Unit 00:- Expanded 62854 -> 336799 (decompressed 535.8 percent)
04:33:45:Unit 00:Called DecompressByteArray: compressed_data_size=62854 data_size=336799, decompressed_data_size=336799 diff=0
04:33:45:Unit 00:- Digital signature verified
04:33:45:Unit 00:
04:33:45:Unit 00:Project: 10504 (Run 319, Clone 0, Gen 287)
04:33:45:Unit 00:
04:33:45:Unit 00:Entering M.D.
04:33:48:Unit 01:- Looking at optimizations...
04:33:48:Unit 01:- Working with standard loops on this execution.
04:33:48:Unit 01:- Previous termination of core was improper.
04:33:48:Unit 01:- Files status OK
04:33:48:Unit 01:sizeof(CORE_PACKET_HDR) = 512 file=<>
04:33:48:Unit 01:- Expanded 44762 -> 170279 (decompressed 380.4 percent)
04:33:48:Unit 01:Called DecompressByteArray: compressed_data_size=44762 data_size=170279, decompressed_data_size=170279 diff=0
04:33:48:Unit 01:- Digital signature verified
04:33:48:Unit 01:
04:33:48:Unit 01:Project: 6804 (Run 15, Clone 68, Gen 430)
04:33:48:Unit 01:
04:33:48:Unit 01:Entering M.D.
04:33:50:Unit 01:Tpr hash 01/wudata_01.tpr:  1298217322 2856057250 2808705497 3718013368 2433894363
04:33:50:Unit 01:calling fah_main gpuDeviceId=1
04:33:50:Unit 01:Working on ALZHEIMER'S DISEASE AMYLOID
04:33:50:Unit 01:Client config unavailable.
04:33:50:Unit 01:Starting GUI Server
04:33:51:Unit 00:Tpr hash 00/wudata_01.tpr:  261460189 2234769035 1512277183 342947789 808027929
04:33:51:Unit 00:
04:33:51:Unit 00:Calling fah_main args: 14 usage=100
04:33:51:Unit 00:
04:35:08:Unit 02:Completed 1700000 out of 10000000 steps  (17%)
04:36:47:Unit 02:Completed 1800000 out of 10000000 steps  (18%)
04:37:21:Slot 01 finishing
04:37:24:Slot 00 finishing
04:38:27:Unit 02:Completed 1900000 out of 10000000 steps  (19%)
04:38:36:Slot 00 finishing
04:41:06:Unit 02:Completed 2000000 out of 10000000 steps  (20%)
04:44:03:Unit 02:Completed 2100000 out of 10000000 steps  (21%)
04:47:18:Unit 02:Completed 2200000 out of 10000000 steps  (22%)
04:50:20:Unit 02:Completed 2300000 out of 10000000 steps  (23%)
04:53:26:Unit 02:Completed 2400000 out of 10000000 steps  (24%)
04:56:29:Unit 02:Completed 2500000 out of 10000000 steps  (25%)
04:59:32:Unit 02:Completed 2600000 out of 10000000 steps  (26%)
05:02:37:Unit 02:Completed 2700000 out of 10000000 steps  (27%)
05:05:49:Unit 02:Completed 2800000 out of 10000000 steps  (28%)
05:08:51:Unit 02:Completed 2900000 out of 10000000 steps  (29%)
05:11:58:Unit 02:Completed 3000000 out of 10000000 steps  (30%)
05:15:06:Unit 02:Completed 3100000 out of 10000000 steps  (31%)
05:18:09:Unit 02:Completed 3200000 out of 10000000 steps  (32%)
05:21:12:Unit 02:Completed 3300000 out of 10000000 steps  (33%)
05:24:19:Unit 02:Completed 3400000 out of 10000000 steps  (34%)
05:27:26:Unit 02:Completed 3500000 out of 10000000 steps  (35%)
05:30:29:Unit 02:Completed 3600000 out of 10000000 steps  (36%)
05:33:32:Unit 02:Completed 3700000 out of 10000000 steps  (37%)
05:36:38:Unit 02:Completed 3800000 out of 10000000 steps  (38%)
05:39:48:Unit 02:Completed 3900000 out of 10000000 steps  (39%)
05:42:59:Unit 02:Completed 4000000 out of 10000000 steps  (40%)
05:46:35:Unit 02:Completed 4100000 out of 10000000 steps  (41%)
05:49:47:Unit 02:Completed 4200000 out of 10000000 steps  (42%)
05:53:00:Unit 02:Completed 4300000 out of 10000000 steps  (43%)
05:56:14:Unit 02:Completed 4400000 out of 10000000 steps  (44%)
05:59:43:Unit 02:Completed 4500000 out of 10000000 steps  (45%)
06:02:56:Unit 02:Completed 4600000 out of 10000000 steps  (46%)
06:06:30:Unit 02:Completed 4700000 out of 10000000 steps  (47%)
06:09:38:Unit 02:Completed 4800000 out of 10000000 steps  (48%)
06:12:40:Unit 02:Completed 4900000 out of 10000000 steps  (49%)
06:15:43:Unit 02:Completed 5000000 out of 10000000 steps  (50%)
06:18:46:Unit 02:Completed 5100000 out of 10000000 steps  (51%)
06:21:51:Unit 02:Completed 5200000 out of 10000000 steps  (52%)
06:25:10:Unit 02:Completed 5300000 out of 10000000 steps  (53%)
06:28:22:Unit 02:Completed 5400000 out of 10000000 steps  (54%)
06:32:21:Unit 02:Completed 5500000 out of 10000000 steps  (55%)
06:35:23:Unit 02:Completed 5600000 out of 10000000 steps  (56%)
06:38:25:Unit 02:Completed 5700000 out of 10000000 steps  (57%)
06:41:29:Unit 02:Completed 5800000 out of 10000000 steps  (58%)
06:44:31:Unit 02:Completed 5900000 out of 10000000 steps  (59%)
06:48:00:Unit 02:Completed 6000000 out of 10000000 steps  (60%)
06:51:01:Unit 02:Completed 6100000 out of 10000000 steps  (61%)
06:54:05:Unit 02:Completed 6200000 out of 10000000 steps  (62%)
06:57:08:Unit 02:Completed 6300000 out of 10000000 steps  (63%)
07:00:07:Unit 02:Completed 6400000 out of 10000000 steps  (64%)
07:03:10:Unit 02:Completed 6500000 out of 10000000 steps  (65%)
07:06:33:Unit 02:Completed 6600000 out of 10000000 steps  (66%)
07:09:34:Unit 02:Completed 6700000 out of 10000000 steps  (67%)
07:12:35:Unit 02:Completed 6800000 out of 10000000 steps  (68%)
07:15:38:Unit 02:Completed 6900000 out of 10000000 steps  (69%)
07:18:37:Unit 02:Completed 7000000 out of 10000000 steps  (70%)
07:21:38:Unit 02:Completed 7100000 out of 10000000 steps  (71%)
07:24:52:Unit 02:Completed 7200000 out of 10000000 steps  (72%)
07:28:15:Unit 02:Completed 7300000 out of 10000000 steps  (73%)
07:31:14:Unit 02:Completed 7400000 out of 10000000 steps  (74%)
07:34:13:Unit 02:Completed 7500000 out of 10000000 steps  (75%)
07:37:14:Unit 02:Completed 7600000 out of 10000000 steps  (76%)
07:40:14:Unit 02:Completed 7700000 out of 10000000 steps  (77%)
07:43:11:Unit 02:Completed 7800000 out of 10000000 steps  (78%)
07:46:13:Unit 02:Completed 7900000 out of 10000000 steps  (79%)
07:49:12:Unit 02:Completed 8000000 out of 10000000 steps  (80%)
07:52:12:Unit 02:Completed 8100000 out of 10000000 steps  (81%)
07:55:14:Unit 02:Completed 8200000 out of 10000000 steps  (82%)
07:58:23:Unit 02:Completed 8300000 out of 10000000 steps  (83%)
08:01:27:Unit 02:Completed 8400000 out of 10000000 steps  (84%)
08:04:32:Unit 02:Completed 8500000 out of 10000000 steps  (85%)
08:08:01:Unit 02:Completed 8600000 out of 10000000 steps  (86%)
08:11:06:Unit 02:Completed 8700000 out of 10000000 steps  (87%)
08:14:10:Unit 02:Completed 8800000 out of 10000000 steps  (88%)
08:17:14:Unit 02:Completed 8900000 out of 10000000 steps  (89%)
08:20:21:Unit 02:Completed 9000000 out of 10000000 steps  (90%)
08:23:30:Unit 02:Completed 9100000 out of 10000000 steps  (91%)
08:27:04:Unit 02:Completed 9200000 out of 10000000 steps  (92%)
08:30:16:Unit 02:Completed 9300000 out of 10000000 steps  (93%)
08:33:23:Unit 02:Completed 9400000 out of 10000000 steps  (94%)
08:36:29:Unit 02:Completed 9500000 out of 10000000 steps  (95%)
08:39:40:Unit 02:Completed 9600000 out of 10000000 steps  (96%)
08:42:47:Unit 02:Completed 9700000 out of 10000000 steps  (97%)
08:46:20:Unit 02:Completed 9800000 out of 10000000 steps  (98%)
08:49:25:Unit 02:Completed 9900000 out of 10000000 steps  (99%)
08:49:26:Connecting to assign3.stanford.edu:8080
08:49:26:News: Welcome to Folding@Home
08:49:26:Assigned to work server 128.113.12.163
08:49:26:Requesting new work unit for slot 02: RUNNING smp:12 from 128.113.12.163
08:49:26:Connecting to 128.113.12.163:8080
08:49:27:Slot 02: Downloading 1.29MiB
08:49:28:Slot 02: Download complete
08:49:28:Received Unit: id:03 state:DOWNLOAD error:OK project:7905 run:100 clone:12 gen:0 core:0xa4 unit:0x0000000000ac9c234ebaaca6bfaeee77
08:52:31:Unit 02:Completed 10000000 out of 10000000 steps  (100%)
08:52:31:Unit 02:DynamicWrapper: Finished Work Unit: sleep=10000
08:52:41:Unit 02:
08:52:41:Unit 02:Finished Work Unit:
08:52:41:Unit 02:- Reading up to 2146452 from "02/wudata_01.trr": Read 2146452
08:52:41:Unit 02:trr file hash check passed.
08:52:41:Unit 02:- Reading up to 223540 from "02/wudata_01.xtc": Read 223540
08:52:41:Unit 02:xtc file hash check passed.
08:52:41:Unit 02:edr file hash check passed.
08:52:41:Unit 02:logfile size: 80751
08:52:41:Unit 02:Leaving Run
08:52:46:Unit 02:- Writing 2475215 bytes of core data to disk...
08:52:46:Unit 02:Done: 2474703 -> 1695655 (compressed to 68.5 percent)
08:52:46:Unit 02:  ... Done.
08:52:46:Unit 02:- Shutting down core
08:52:46:Unit 02:
08:52:46:Unit 02:Folding@home Core Shutdown: FINISHED_UNIT
08:52:46:FahCore, running Unit 02, returned: FINISHED_UNIT (100 = 0x64)
08:52:46:Sending unit results: id:02 state:SEND error:OK project:7007 run:1 clone:29 gen:71 core:0xa4 unit:0x000000ef0001329c4dfb908e5d06bdc3
08:52:46:Unit 02: Uploading 1.62MiB to 129.74.85.15
08:52:46:Starting Unit 03
08:52:46:Connecting to 129.74.85.15:8080
08:52:46:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 03 -suffix 01 -lifeline 5576 -version 701 -checkpoint 15 -np 12
08:52:46:Started core on PID 3512
08:52:46:FahCore 0xa4 started
08:52:47:Unit 03:
08:52:47:Unit 03:*------------------------------*
08:52:47:Unit 03:Folding@Home Gromacs GB Core
08:52:47:Unit 03:Version 2.27 (Dec. 15, 2010)
08:52:47:Unit 03:
08:52:47:Unit 03:Preparing to commence simulation
08:52:47:Unit 03:- Looking at optimizations...
08:52:47:Unit 03:- Created dyn
08:52:47:Unit 03:- Files status OK
08:52:47:Unit 03:- Expanded 1354576 -> 2552108 (decompressed 188.4 percent)
08:52:47:Unit 03:Called DecompressByteArray: compressed_data_size=1354576 data_size=2552108, decompressed_data_size=2552108 diff=0
08:52:47:Unit 03:- Digital signature verified
08:52:47:Unit 03:
08:52:47:Unit 03:Project: 7905 (Run 100, Clone 12, Gen 0)
08:52:47:Unit 03:
08:52:47:Unit 03:Assembly optimizations on if available.
08:52:47:Unit 03:Entering M.D.
08:52:52:Unit 02: 89.35%
08:52:53:Unit 02: Upload complete
08:52:53:Server responded WORK_ACK (400)
08:52:53:Final credit estimate, 3833.00 points
08:52:53:Cleaning up Unit 02
08:52:53:Unit 03:Mapping NT from 12 to 12
08:52:53:Unit 03:Completed 0 out of 500000 steps  (0%)
08:56:40:Unit 03:Completed 5000 out of 500000 steps  (1%)
09:00:23:Unit 03:Completed 10000 out of 500000 steps  (2%)
09:04:45:Unit 03:Completed 15000 out of 500000 steps  (3%)
09:08:41:Unit 03:Completed 20000 out of 500000 steps  (4%)
09:12:24:Unit 03:Completed 25000 out of 500000 steps  (5%)
09:16:15:Unit 03:Completed 30000 out of 500000 steps  (6%)
09:20:11:Unit 03:Completed 35000 out of 500000 steps  (7%)
09:24:08:Unit 03:Completed 40000 out of 500000 steps  (8%)
09:28:33:Unit 03:Completed 45000 out of 500000 steps  (9%)
09:32:18:Unit 03:Completed 50000 out of 500000 steps  (10%)
09:36:04:Unit 03:Completed 55000 out of 500000 steps  (11%)
09:39:51:Unit 03:Completed 60000 out of 500000 steps  (12%)
09:43:33:Unit 03:Completed 65000 out of 500000 steps  (13%)
09:46:43:Lost lifeline PID 6044, exiting
09:46:43:Server connection id=1 ended
09:46:44:Slot 00: shutting core down
09:46:44:WARNING: FahCore is known to not shutdown cleanly, killing
09:46:44:WARNING: Killing Unit 00
09:46:44:Slot 01: shutting core down
09:46:44:WARNING: FahCore is known to not shutdown cleanly, killing
09:46:44:WARNING: Killing Unit 01
09:46:44:Slot 02: shutting core down
09:47:45:WARNING: Killing Unit 03
09:47:45:Clean exit


Mod Edit: Added Code Tags - PantherX
melephant
 
Posts: 42
Joined: Sun Feb 24, 2008 9:23 am

Re: Installed second video card, but only one is recognized

Postby 7im » Sat Nov 12, 2011 2:36 am

This is a good sign...

04:01:52: GPU 0: NVIDIA:1 G94 [GeForce 9600 GT]
04:01:52: GPU 1: FERMI:1 GF100 [GeForce GTX 480]

However, I expected to see CUDA 2.1.

04:01:52: CUDA: 2.0

What driver version is installed? As gwildperson, you may need to uninstall the driver, and then install the latest version.

Then uninstall and reinstall the v7 client.

Post the new log if not working. Thanks.
User avatar
7im
 
Posts: 10189
Joined: Thu Nov 29, 2007 5:30 pm
Location: Arizona

Re: Installed second video card, but only one is recognized

Postby melephant » Sat Nov 12, 2011 5:13 am

Followed your instructions. Nvidia driver version 285.62 installed. Version 7 uninstalled and reinstalled. CUDA version remains 2.0. I downloaded the beta drivers released yesterday 285.79 and the results are the same: CUDA 2.0 and CUDA version 4010. It would appear CUDA 2.1 is not supported by these drivers.
Code: Select all
*********************** Log Started 2011-11-12T04:03:23 ************************
04:03:23:************************* Folding@home Client *************************
04:03:23:      Website: http://folding.stanford.edu/
04:03:23:    Copyright: (c) 2009-2011 Stanford University
04:03:23:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
04:03:23:         Args: --lifeline 4628 --command-port=36330
04:03:23:       Config: C:/Users/Mel/AppData/Roaming/FAHClient/config.xml
04:03:23:******************************** Build ********************************
04:03:23:      Version: 7.1.38
04:03:23:         Date: Oct 6 2011
04:03:23:         Time: 19:57:04
04:03:23:      SVN Rev: 3080
04:03:23:       Branch: fah/trunk/client
04:03:23:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
04:03:23:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
04:03:23:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT
04:03:23:     Platform: win32 XP
04:03:23:         Bits: 32
04:03:23:         Mode: Release
04:03:23:******************************* System ********************************
04:03:23:          CPU: Intel(R) Core(TM) i7 CPU 980 @ 3.33GHz
04:03:23:       CPU ID: GenuineIntel Family 6 Model 44 Stepping 2
04:03:23:         CPUs: 12
04:03:23:       Memory: 11.99GiB
04:03:23:  Free Memory: 9.79GiB
04:03:23:      Threads: WINDOWS_THREADS
04:03:23:   On Battery: false
04:03:23:   UTC offset: -6
04:03:23:          PID: 1344
04:03:23:          CWD: C:/Users/Mel/AppData/Roaming/FAHClient
04:03:23:           OS: Windows 7 Home Premium
04:03:23:      OS Arch: AMD64
04:03:23:         GPUs: 2
04:03:23:        GPU 0: NVIDIA:1 G94 [GeForce 9600 GT]
04:03:23:        GPU 1: FERMI:1 GF100 [GeForce GTX 480]
04:03:23:         CUDA: 2.0
04:03:23:  CUDA Driver: 4010
04:03:23:Win32 Service: false
04:03:23:***********************************************************************
04:03:23:<config>
04:03:23:  <!-- Folding Slot Configuration -->
04:03:23:  <gpu v='true'/>
04:03:23:
04:03:23:  <!-- User Information -->
04:03:23:  <passkey v='********************************'/>
04:03:23:  <team v='12867'/>
04:03:23:  <user v='Mel_Stark'/>
04:03:23:
04:03:23:  <!-- Folding Slots -->
04:03:23:</config>
04:03:23:Trying to access database...
04:03:23:Successfully acquired database lock
04:03:23:Enabled folding slot 00: READY gpu:0:"G94 [GeForce 9600 GT]"
04:03:23:Enabled folding slot 01: READY gpu:1:"GF100 [GeForce GTX 480]"
04:03:23:Enabled folding slot 02: READY smp:12
04:03:23:Connecting to assign-GPU.stanford.edu:80
04:03:23:Connecting to assign-GPU.stanford.edu:80
04:03:23:Connecting to assign-GPU.stanford.edu:80
04:03:23:Connecting to assign-GPU.stanford.edu:80
04:03:23:Connecting to assign3.stanford.edu:8080
04:03:23:Connecting to assign-GPU.stanford.edu:80
04:03:23:News: Welcome to Folding@Home
04:03:23:Assigned to work server 171.67.108.11
04:03:23:Requesting new work unit for slot 00: READY gpu:0:"G94 [GeForce 9600 GT]" from 171.67.108.11
04:03:23:Connecting to 171.67.108.11:8080
04:03:23:News: Welcome to Folding@Home
04:03:23:Assigned to work server 171.64.65.64
04:03:23:Requesting new work unit for slot 01: READY gpu:1:"GF100 [GeForce GTX 480]" from 171.64.65.64
04:03:23:Connecting to 171.64.65.64:8080
04:03:23:Slot 00: Downloading 46.16KiB
04:03:23:Slot 01: Downloading 44.59KiB
04:03:24:Slot 00: Download complete
04:03:24:Received Unit: id:00 state:DOWNLOAD error:OK project:5765 run:1 clone:175 gen:83 core:0x11 unit:0x0b818cd94ebdf008005300af00011685
04:03:24:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah
04:03:24:Connecting to http://www.stanford.edu:80
04:03:24:Slot 01: Download complete
04:03:24:Received Unit: id:01 state:DOWNLOAD error:OK project:6801 run:8806 clone:0 gen:85 core:0x15 unit:0x000000580a3b1e644d94c128bf3d6ca6
04:03:24:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah
04:03:24:Connecting to http://www.stanford.edu:80
04:03:24:FahCore 11: Downloading 648.82KiB
04:03:24:FahCore 15: Downloading 1.47MiB
04:03:26:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1
04:03:26:FahCore 11: Download complete
04:03:26:Valid core signature
04:03:26:Unpacked 1.82MiB to cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe
04:03:26:Starting Unit 00
04:03:26:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/G80/Core_11.fah/FahCore_11.exe -dir 00 -suffix 01 -lifeline 1344 -version 701 -checkpoint 15 -gpu 0
04:03:26:Started core on PID 828
04:03:26:FahCore 0x11 started
04:03:27:Unit 00:
04:03:27:Unit 00:*------------------------------*
04:03:27:Unit 00:Folding@Home GPU Core
04:03:27:Unit 00:Version 1.31 (Tue Sep 15 10:57:42 PDT 2009)
04:03:27:Unit 00:
04:03:27:Unit 00:Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86
04:03:27:Unit 00:Build host: amoeba
04:03:27:Unit 00:Board Type: Nvidia
04:03:27:Unit 00:Core      :
04:03:27:Unit 00:Preparing to commence simulation
04:03:27:Unit 00:- Looking at optimizations...
04:03:27:Unit 00:DeleteFrameFiles: successfully deleted file=00/wudata_01.ckp
04:03:27:Unit 00:- Created dyn
04:03:27:Unit 00:- Files status OK
04:03:27:Unit 00:- Expanded 46755 -> 252912 (decompressed 540.9 percent)
04:03:27:Unit 00:Called DecompressByteArray: compressed_data_size=46755 data_size=252912, decompressed_data_size=252912 diff=0
04:03:27:Unit 00:- Digital signature verified
04:03:27:Unit 00:
04:03:27:Unit 00:Project: 5765 (Run 1, Clone 175, Gen 83)
04:03:27:Unit 00:
04:03:27:Unit 00:Assembly optimizations on if available.
04:03:27:Unit 00:Entering M.D.
04:03:29:FahCore 15: Download complete
04:03:29:Valid core signature
04:03:29:Unpacked 4.40MiB to cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe
04:03:29:Starting Unit 01
04:03:29:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_15.fah/FahCore_15.exe -dir 01 -suffix 01 -lifeline 1344 -version 701 -checkpoint 15 -gpu 1
04:03:29:Started core on PID 1588
04:03:29:FahCore 0x15 started
04:03:29:Unit 01:
04:03:29:Unit 01:*------------------------------*
04:03:29:Unit 01:Folding@Home GPU Core
04:03:29:Unit 01:Version                2.20 (Tue Aug 2 12:06:37 PDT 2011)
04:03:29:Unit 01:Build host             SimbiosNvdWin7
04:03:29:Unit 01:Board Type             NVIDIA/CUDA
04:03:29:Unit 01:Core                   15
04:03:29:Unit 01:GPU device id          1
04:03:29:Unit 01:
04:03:29:Unit 01:Window's signal control handler registered.
04:03:29:Unit 01:Preparing to commence simulation
04:03:29:Unit 01:- Looking at optimizations...
04:03:29:Unit 01:DeleteFrameFiles: successfully deleted file=01/wudata_01.ckp
04:03:29:Unit 01:- Created dyn
04:03:29:Unit 01:- Files status OK
04:03:29:Unit 01:sizeof(CORE_PACKET_HDR) = 512 file=<>
04:03:29:Unit 01:- Expanded 45149 -> 171827 (decompressed 380.5 percent)
04:03:29:Unit 01:Called DecompressByteArray: compressed_data_size=45149 data_size=171827, decompressed_data_size=171827 diff=0
04:03:29:Unit 01:- Digital signature verified
04:03:29:Unit 01:
04:03:29:Unit 01:Project: 6801 (Run 8806, Clone 0, Gen 85)
04:03:29:Unit 01:
04:03:29:Unit 01:Assembly optimizations on if available.
04:03:29:Unit 01:Entering M.D.
04:03:31:Unit 01:Tpr hash 01/wudata_01.tpr:  651012101 731616396 4062098411 4001114977 2458156469
04:03:31:Unit 01:calling fah_main gpuDeviceId=1
04:03:31:Unit 01:Working on ALZHEIMER'S DISEASE AMYLOID
04:03:31:Unit 01:Client config unavailable.
04:03:31:Unit 01:Starting GUI Server
04:03:32:Unit 00:Tpr hash 00/wudata_01.tpr:  2462480482 4159901929 4222575972 2259098210 366859908
04:03:32:Unit 00:
04:03:32:Unit 00:Calling fah_main args: 14 usage=100
04:03:32:Unit 00:
04:03:53:News: Welcome to Folding@Home
04:03:53:Assigned to work server 128.113.12.163
04:03:53:Requesting new work unit for slot 02: READY smp:12 from 128.113.12.163
04:03:53:Connecting to 128.113.12.163:8080
04:03:54:Slot 02: Downloading 1.29MiB
04:03:56:Slot 02: Download complete
04:03:56:Received Unit: id:02 state:DOWNLOAD error:OK project:7905 run:120 clone:10 gen:0 core:0xa4 unit:0x0000000000ac9c234ebaad0a39536247
04:03:56:Downloading core from http://www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah
04:03:56:Connecting to http://www.stanford.edu:80
04:03:57:FahCore a4: Downloading 2.89MiB
04:04:03:FahCore a4: 67.85%
04:04:05:FahCore a4: Download complete
04:04:05:Valid core signature
04:04:05:Unpacked 9.59MiB to cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe
04:04:05:Starting Unit 02
04:04:05:Running core: C:/Users/Mel/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 02 -suffix 01 -lifeline 1344 -version 701 -checkpoint 15 -np 12
04:04:05:Started core on PID 1212
04:04:05:FahCore 0xa4 started
04:04:06:Unit 02:
04:04:06:Unit 02:*------------------------------*
04:04:06:Unit 02:Folding@Home Gromacs GB Core
04:04:06:Unit 02:Version 2.27 (Dec. 15, 2010)
04:04:06:Unit 02:
04:04:06:Unit 02:Preparing to commence simulation
04:04:06:Unit 02:- Looking at optimizations...
04:04:06:Unit 02:- Created dyn
04:04:06:Unit 02:- Files status OK
04:04:06:Unit 02:- Expanded 1354037 -> 2552108 (decompressed 188.4 percent)
04:04:06:Unit 02:Called DecompressByteArray: compressed_data_size=1354037 data_size=2552108, decompressed_data_size=2552108 diff=0
04:04:06:Unit 02:- Digital signature verified
04:04:06:Unit 02:
04:04:06:Unit 02:Project: 7905 (Run 120, Clone 10, Gen 0)
04:04:06:Unit 02:
04:04:06:Unit 02:Assembly optimizations on if available.
04:04:06:Unit 02:Entering M.D.
04:04:12:Unit 02:Mapping NT from 12 to 12
04:04:12:Unit 02:Completed 0 out of 500000 steps  (0%)
04:06:33:Unit 02:Completed 5000 out of 500000 steps  (1%)
04:08:23:Downloading project 5765 description
04:08:23:Connecting to fah-web.stanford.edu:80
04:08:24:Downloading project 6801 description
04:08:24:Connecting to fah-web.stanford.edu:80
04:08:24:Downloading project 7905 description
04:08:24:Connecting to fah-web.stanford.edu:80
04:08:50:Unit 02:Completed 10000 out of 500000 steps  (2%)


Mod Edit: Added Code Tags - PantherX
melephant
 
Posts: 42
Joined: Sun Feb 24, 2008 9:23 am

Re: Installed second video card, but only one is recognized

Postby baz657 » Sat Nov 12, 2011 10:57 am

Had a similar problem in this thread http://foldingforum.org/viewtopic.php?f=67&t=19768. I gave up in the end and just stuck to the one card.
baz657
 
Posts: 55
Joined: Thu Nov 12, 2009 2:40 pm
Location: Chesterfield, UK

Next

Return to V7.1.52 Windows/Linux

Who is online

Users browsing this forum: No registered users and 1 guest

cron