Debian Server ( No GUI )

Moderators: Site Moderators, FAHC Science Team

Debian Server ( No GUI )

Postby trappedinside » Wed Sep 12, 2012 3:40 pm

Can anyone tell me if the client will run on Debian 6 server. Is so what are the installation requirements.

I have several servers that are on 24/7 but only used as backups so was thinking of putting them to use if possible.
trappedinside
 
Posts: 3
Joined: Wed Sep 12, 2012 3:29 pm

Re: Debian Server ( No GUI )

Postby Nathan_P » Wed Sep 12, 2012 8:16 pm

not sure about debian server, but i know that several people have got v6.34 working on ubuntu server
Image
Nathan_P
 
Posts: 1175
Joined: Wed Apr 01, 2009 10:22 pm
Location: Jersey, Channel islands

Re: Debian Server ( No GUI )

Postby smoking2000 » Thu Sep 13, 2012 7:33 am

The v7 client will work on Debian Squeeze, but don't try the .deb packages, the v7.1.52 packages have broken dependencies.

I recommend to stick with v6 on Squeeze until after you've upgraded to Wheezy (which is expected to be released early next year).
User avatar
smoking2000
 
Posts: 469
Joined: Mon Dec 03, 2007 7:20 am
Location: Amsterdam

Re: Debian Server ( No GUI )

Postby edman747 » Sun Sep 23, 2012 11:33 pm

I have v6.34 running on Debian 6.0 (x64)
Just followed this guide: (LinUNIGuide#ntoc1)

enjoy,
returning: a few years ago my office computer was in a 2nd floor cubical. I spent most of my time in the simulation labs. my desktop pc was folding 24/7
edman747
 
Posts: 7
Joined: Sun Sep 23, 2012 11:24 pm

Re: Debian Server ( No GUI )

Postby thermi » Sun Jan 13, 2013 3:47 am

Using v7 on Debian 6 is indeed not possible, as trying to start it will give you the following error:
root@debian-server:/# FAHClient
FAHClient: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by FAHClient)
(I hope this gets fixed soon!)
thermi
 
Posts: 2
Joined: Sun Jan 13, 2013 3:43 am

Re: Debian Server ( No GUI )

Postby art_l_j_PlanetAMD64 » Sun Jan 13, 2013 8:35 am

smoking2000 wrote:The v7 client will work on Debian Squeeze, but don't try the .deb packages, the v7.1.52 packages have broken dependencies.
I recommend to stick with v6 on Squeeze until after you've upgraded to Wheezy (which is expected to be released early next year).

I have two Debian Squeeze v6.0.6 machines running FAH v7.2.9 without any problems, that were installed from .deb packages:
fahclient_7.2.9_amd64.deb
fahcontrol_7.2.9-1_all.deb
Debian 6.0.6 was released September 29th, 2012, and that is the version I am running, so maybe the older version from the initial posts (Wed Sep 12, 2012) had some problem.

thermi wrote:Using v7 on Debian 6 is indeed not possible, as trying to start it will give you the following error:
root@debian-server:/# FAHClient
FAHClient: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by FAHClient)
(I hope this gets fixed soon!)

The client should be run by the command /etc/init.d/FAHClient start, but that is separate from the error you described. Also, it would be better to run FAHClient as a normal user, not as root.

My two Debian Squeeze v6.0.6 machines run v7 without any problems, here is the ldd output from one system:
Code: Select all
art@art-Debian-02:/usr/bin$ ldd FAHClient
   linux-vdso.so.1 =>  (0x00007fffc23ff000)
   libGL.so.1 => /usr/lib/libGL.so.1 (0x00007ff6494b0000)
   libdl.so.2 => /lib/libdl.so.2 (0x00007ff6492ac000)
   libz.so.1 => /usr/lib/libz.so.1 (0x00007ff649094000)
   libbz2.so.1.0 => /lib/libbz2.so.1.0 (0x00007ff648e84000)
   libpthread.so.0 => /lib/libpthread.so.0 (0x00007ff648c68000)
   libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x00007ff648953000)
   libm.so.6 => /lib/libm.so.6 (0x00007ff6486d1000)
   libgcc_s.so.1 => /lib/libgcc_s.so.1 (0x00007ff6484bb000)
   libc.so.6 => /lib/libc.so.6 (0x00007ff648158000)
   libX11.so.6 => /usr/lib/libX11.so.6 (0x00007ff647e1d000)
   libXext.so.6 => /usr/lib/libXext.so.6 (0x00007ff647c0b000)
   libXxf86vm.so.1 => /usr/lib/libXxf86vm.so.1 (0x00007ff647a05000)
   libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0x00007ff647803000)
   libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0x00007ff6475fe000)
   libdrm.so.2 => /usr/lib/libdrm.so.2 (0x00007ff6473f2000)
   /lib64/ld-linux-x86-64.so.2 (0x00007ff649742000)
   libxcb.so.1 => /usr/lib/libxcb.so.1 (0x00007ff6471d6000)
   librt.so.1 => /lib/librt.so.1 (0x00007ff646fcd000)
   libXau.so.6 => /usr/lib/libXau.so.6 (0x00007ff646dca000)
   libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0x00007ff646bc5000)
art@art-Debian-02:/usr/bin$

The library libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x00007ff648953000) has no error on my machines. Maybe running apt-get update and apt-get upgrade on the library would fix the error, or maybe (although I think this is unlikely) the Server version is using different libraries than the 'normal' user version of Debian v6.0.6 that I am running.
art_l_j_PlanetAMD64
Over 1.04 Billion Total Points
Over 185,000 Work Units
Over 3,800,000 PPD
Overall rank (if points are combined) 20 of 1721690
In memory of my Mother May 12th 1923 - February 10th 2012
art_l_j_PlanetAMD64
 
Posts: 472
Joined: Sun May 30, 2010 3:28 pm

Re: Debian Server ( No GUI )

Postby thermi » Sun Jan 13, 2013 7:28 pm

I'm still running 32-bit Debian, so this might be the root of the problem, although I use the 32-bit FAHClient.
Code: Select all
/usr/bin# ldd FAHClient
./FAHClient: /usr/lib/libstdc++.so.6: version `GLIBCXX_3.4.15' not found (required by ./FAHClient)
        linux-gate.so.1 =>  (0xb77ca000)
        libGL.so.1 => /usr/lib/libGL.so.1 (0xb7758000)
        libdl.so.2 => /lib/i686/cmov/libdl.so.2 (0xb7754000)
        libz.so.1 => /usr/lib/libz.so.1 (0xb773f000)
        libbz2.so.1.0 => /lib/libbz2.so.1.0 (0xb772e000)
        libpthread.so.0 => /lib/i686/cmov/libpthread.so.0 (0xb7715000)
        libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb7620000)
        libm.so.6 => /lib/i686/cmov/libm.so.6 (0xb75fa000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb75dc000)
        libc.so.6 => /lib/i686/cmov/libc.so.6 (0xb7494000)
        libX11.so.6 => /usr/lib/libX11.so.6 (0xb7377000)
        libXext.so.6 => /usr/lib/libXext.so.6 (0xb7368000)
        libXxf86vm.so.1 => /usr/lib/libXxf86vm.so.1 (0xb7363000)
        libXdamage.so.1 => /usr/lib/libXdamage.so.1 (0xb7360000)
        libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0xb735a000)
        libdrm.so.2 => /usr/lib/libdrm.so.2 (0xb7350000)
        /lib/ld-linux.so.2 (0xb77cb000)
        libxcb.so.1 => /usr/lib/libxcb.so.1 (0xb7337000)
        librt.so.1 => /lib/i686/cmov/librt.so.1 (0xb732e000)
        libXau.so.6 => /usr/lib/libXau.so.6 (0xb732b000)
        libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb7325000)


All packages are up-to-date and I don't know what is causing the error. :/
thermi
 
Posts: 2
Joined: Sun Jan 13, 2013 3:43 am

Re: Debian Server ( No GUI )

Postby art_l_j_PlanetAMD64 » Mon Jan 14, 2013 12:50 am

thermi wrote:I'm still running 32-bit Debian, so this might be the root of the problem, although I use the 32-bit FAHClient.

A Google search for GLIBCXX_3.4.15 turns up a lot of possible solutions to your problem.

Some possible solutions to your problem might be found here:
http://forums.debian.net/viewtopic.php?f=8&t=82925

One of the possible solutions was this:
stevepusser wrote:Is it possible that the program you are trying to run is i386 32-bit, and your system is not that, such as amd64 64-bit? If so, the solution is usually to install ia32 and lib32 packages to enable 32-bit to run on 64-bit.

Another one was this:
PeterB wrote:A libstdc++.so with the needed GLIBCXX_3.4.15 lives in the libstdc++6-4.6-dev package in Testing (D7).

You could try downloading the package, open with an archive manager and extract the library you need. However, this may well lead to other dependency problems. Generally, lifting libraries from other distros is a seriously bad idea, but as this is a C++ development package, you might get away with it.

There are several libstdc++6-4.?-dev packages in testing,
http://packages.debian.org/wheezy/libstdc++6-4.4-dev
http://packages.debian.org/wheezy/libstdc++6-4.5-dev
http://packages.debian.org/wheezy/libstdc++6-4.6-dev
http://packages.debian.org/wheezy/libstdc++6-4.7-dev

Probably, the lowest version that contains a GLIBCXX_3.4.15 would be best (or least worst!).
art_l_j_PlanetAMD64
 
Posts: 472
Joined: Sun May 30, 2010 3:28 pm


Return to V7.1.52 Windows/Linux

Who is online

Users browsing this forum: No registered users and 1 guest

cron