Page 1 of 1

WU stuck at status=send, progress=100%

PostPosted: Sat Oct 27, 2012 10:52 pm
by Valkyrie
Hello

My system had completed 11020 (0,3608,41) but did not complete the clean up. It has carried on with an 8055. Any way to fix this?


Code: Select all
17:13:36:WU00:FS00:0xa3:Completed 960000 out of 1000000 steps  (96%)
17:18:52:WU00:FS00:0xa3:Completed 970000 out of 1000000 steps  (97%)
17:24:07:WU00:FS00:0xa3:Completed 980000 out of 1000000 steps  (98%)
17:29:23:WU00:FS00:0xa3:Completed 990000 out of 1000000 steps  (99%)
17:29:23:WU01:FS00:Connecting to assign3.stanford.edu:8080
17:29:23:WU01:FS00:News: Welcome to Folding@Home
17:29:23:WU01:FS00:Assigned to work server 171.67.108.58
17:29:23:WU01:FS00:Requesting new work unit for slot 00: RUNNING smp:4 from 171.67.108.58
17:29:23:WU01:FS00:Connecting to 171.67.108.58:8080
17:29:23:WU01:FS00:Downloading 672.35KiB
17:29:25:WU01:FS00:Download complete
17:29:25:WU01:FS00:Received Unit: id:01 state:DOWNLOAD error:OK project:8055 run:653 clone:7 gen:18 core:0xa4 unit:0x000000166652edca506cfe53c99e83b3
17:34:38:WU00:FS00:0xa3:Completed 1000000 out of 1000000 steps  (100%)
17:34:38:WU00:FS00:0xa3:DynamicWrapper: Finished Work Unit: sleep=10000
17:34:48:WU00:FS00:0xa3:
17:34:48:WU00:FS00:0xa3:Finished Work Unit:
17:34:48:WU00:FS00:0xa3:- Reading up to 6652008 from "00/wudata_01.trr": Read 6652008
17:34:48:WU00:FS00:0xa3:trr file hash check passed.
17:34:48:WU00:FS00:0xa3:- Reading up to 999028 from "00/wudata_01.xtc": Read 999028
17:34:48:WU00:FS00:0xa3:xtc file hash check passed.
17:34:48:WU00:FS00:0xa3:edr file hash check passed.
17:34:48:WU00:FS00:0xa3:logfile size: 28815
17:34:48:WU00:FS00:0xa3:Leaving Run
17:34:51:WU00:FS00:0xa3:- Writing 7687215 bytes of core data to disk...
17:34:53:WU00:FS00:0xa3:Done: 7686703 -> 7349965 (compressed to 95.6 percent)
17:34:53:WU00:FS00:0xa3:  ... Done.
17:34:55:WU00:FS00:0xa3:- Shutting down core
17:34:55:WU00:FS00:0xa3:
17:34:55:WU00:FS00:0xa3:Folding@home Core Shutdown: FINISHED_UNIT
17:34:56:WU00:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
17:34:56:WU00:FS00:Sending unit results: id:00 state:SEND error:OK project:11020 run:0 clone:3608 gen:41 core:0xa3 unit:0x0000003e0a3b1e5b4d8248a6344d8004
17:34:56:WU00:FS00:Uploading 7.01MiB to 171.64.65.55
17:34:56:WU00:FS00:Connecting to 171.64.65.55:8080
17:34:56:WU01:FS00:Starting
17:34:56:WU01:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Dawn/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 01 -suffix 01 -version 701 -lifeline 2888 -checkpoint 15 -np 4
17:34:56:WU01:FS00:Started FahCore on PID 6952
17:34:56:WU01:FS00:Core PID:6096
17:34:56:WU01:FS00:FahCore 0xa4 started
17:34:56:WU01:FS00:0xa4:
17:34:56:WU01:FS00:0xa4:*------------------------------*
17:34:56:WU01:FS00:0xa4:Folding@Home Gromacs GB Core
17:34:56:WU01:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
17:34:56:WU01:FS00:0xa4:
17:34:56:WU01:FS00:0xa4:Preparing to commence simulation
17:34:56:WU01:FS00:0xa4:- Looking at optimizations...
17:34:56:WU01:FS00:0xa4:- Created dyn
17:34:56:WU01:FS00:0xa4:- Files status OK
17:34:56:WU01:FS00:0xa4:- Expanded 687978 -> 1530560 (decompressed 222.4 percent)
17:34:56:WU01:FS00:0xa4:Called DecompressByteArray: compressed_data_size=687978 data_size=1530560, decompressed_data_size=1530560 diff=0
17:34:56:WU01:FS00:0xa4:- Digital signature verified
17:34:56:WU01:FS00:0xa4:
17:34:56:WU01:FS00:0xa4:Project: 8055 (Run 653, Clone 7, Gen 18)
17:34:56:WU01:FS00:0xa4:
17:34:56:WU01:FS00:0xa4:Assembly optimizations on if available.
17:34:56:WU01:FS00:0xa4:Entering M.D.
17:35:02:WU00:FS00:Upload 8.92%
17:35:02:WU01:FS00:0xa4:Mapping NT from 4 to 4
17:35:02:WU01:FS00:0xa4:Completed 0 out of 500000 steps  (0%)
17:35:08:WU00:FS00:Upload 17.83%
17:35:14:WU00:FS00:Upload 26.75%
17:35:20:WU00:FS00:Upload 35.66%
17:35:26:WU00:FS00:Upload 44.58%
17:35:32:WU00:FS00:Upload 54.39%
17:35:38:WU00:FS00:Upload 63.30%
17:35:44:WU00:FS00:Upload 72.22%
17:35:50:WU00:FS00:Upload 81.13%
17:35:56:WU00:FS00:Upload 90.05%
17:36:02:WU00:FS00:Upload 98.97%
17:38:20:WU01:FS00:0xa4:Completed 5000 out of 500000 steps  (1%)
17:41:35:WU01:FS00:0xa4:Completed 10000 out of 500000 steps  (2%)
17:44:50:WU01:FS00:0xa4:Completed 15000 out of 500000 steps  (3%)
17:48:05:WU01:FS00:0xa4:Completed 20000 out of 500000 steps  (4%)
17:51:20:WU01:FS00:0xa4:Completed 25000 out of 500000 steps  (5%)
17:54:35:WU01:FS00:0xa4:Completed 30000 out of 500000 steps  (6%)
17:57:50:WU01:FS00:0xa4:Completed 35000 out of 500000 steps  (7%)
18:01:05:WU01:FS00:0xa4:Completed 40000 out of 500000 steps  (8%)
18:04:20:WU01:FS00:0xa4:Completed 45000 out of 500000 steps  (9%)
18:07:35:WU01:FS00:0xa4:Completed 50000 out of 500000 steps  (10%)
18:10:50:WU01:FS00:0xa4:Completed 55000 out of 500000 steps  (11%)
18:14:04:WU01:FS00:0xa4:Completed 60000 out of 500000 steps  (12%)
18:17:19:WU01:FS00:0xa4:Completed 65000 out of 500000 steps  (13%)
18:20:34:WU01:FS00:0xa4:Completed 70000 out of 500000 steps  (14%)
18:23:48:WU01:FS00:0xa4:Completed 75000 out of 500000 steps  (15%)
18:27:03:WU01:FS00:0xa4:Completed 80000 out of 500000 steps  (16%)
18:30:56:WU01:FS00:0xa4:Completed 85000 out of 500000 steps  (17%)
18:34:10:WU01:FS00:0xa4:Completed 90000 out of 500000 steps  (18%)


Mod note - Added Code tags

Re: WU stuck at status=send, progress=100%

PostPosted: Sat Oct 27, 2012 11:09 pm
by Joe_H
There have been occasional reports of downloads or uploads hanging and the client not recovering and retrying the connection. Stopping and then restarting the client usually will succeed in uploading a WU waiting to be turned in. If you are running the client as a service, restarting the machine may be the quickest way to restart the client.

Re: WU stuck at status=send, progress=100%

PostPosted: Sat Oct 27, 2012 11:17 pm
by P5-133XL
If a restart of the client does not work then more drastic methods are available. Report back if the restart does not fix it.

Re: WU stuck at status=send, progress=100%

PostPosted: Sat Oct 27, 2012 11:33 pm
by Valkyrie
Well I did a restart and the status screen now shows only the current running wu. Looking at the log, I hope the "GOT_Already" is correct and the "server did not like results, dumping" is because it already got the result.

Thanks for the help,

V


Code: Select all
*********************** Log Started 2012-10-27T22:17:13Z ***********************
22:17:13:************************* Folding@home Client *************************
22:17:13:      Website: http://folding.stanford.edu/
22:17:13:    Copyright: (c) 2009-2012 Stanford University
22:17:13:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
22:17:13:         Args:
22:17:13:       Config: C:/Users/Dawn/AppData/Roaming/FAHClient/config.xml
22:17:13:******************************** Build ********************************
22:17:13:      Version: 7.1.52
22:17:13:         Date: Mar 20 2012
22:17:13:         Time: 19:37:42
22:17:13:      SVN Rev: 3515
22:17:13:       Branch: fah/trunk/client
22:17:13:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
22:17:13:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
22:17:13:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT
22:17:13:     Platform: win32 XP
22:17:13:         Bits: 32
22:17:13:         Mode: Release
22:17:13:******************************* System ********************************
22:17:13:          CPU: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz
22:17:13:       CPU ID: GenuineIntel Family 6 Model 42 Stepping 7
22:17:13:         CPUs: 4
22:17:13:       Memory: 7.95GiB
22:17:13:  Free Memory: 6.84GiB
22:17:13:      Threads: WINDOWS_THREADS
22:17:13:   On Battery: false
22:17:13:   UTC offset: -7
22:17:13:          PID: 2816
22:17:13:          CWD: C:/Users/Dawn/AppData/Roaming/FAHClient
22:17:13:           OS: Windows 7 Home Premium
22:17:13:      OS Arch: AMD64
22:17:13:         GPUs: 1
22:17:13:        GPU 0: ATI:4 NI Whistler [AMD Radeon HD 6600M Series]
22:17:13:         CUDA: Not detected
22:17:13:Win32 Service: false
22:17:13:***********************************************************************
22:17:13:<config>
22:17:13:  <!-- User Information -->
22:17:13:  <passkey v='********************************'/>
22:17:13:  <team v='37412'/>
22:17:13:  <user v='valkyrie'/>
22:17:13:
22:17:13:  <!-- Folding Slots -->
22:17:13:</config>
22:17:13:Trying to access database...
22:17:13:Successfully acquired database lock
22:17:13:Enabled folding slot 00: READY smp:4
22:17:13:WU00:FS00:Sending unit results: id:00 state:SEND error:OK project:11020 run:0 clone:3608 gen:41 core:0xa3 unit:0x0000003e0a3b1e5b4d8248a6344d8004
22:17:13:WU00:FS00:Uploading 7.01MiB to 171.64.65.55
22:17:13:WU00:FS00:Connecting to 171.64.65.55:8080
22:17:13:WU01:FS00:Starting
22:17:13:WU01:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Dawn/AppData/Roaming/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 01 -suffix 01 -version 701 -lifeline 2816 -checkpoint 15 -np 4
22:17:14:WU01:FS00:Started FahCore on PID 2192
22:17:16:WU01:FS00:Core PID:2700
22:17:16:WU01:FS00:FahCore 0xa4 started
22:17:17:WU01:FS00:0xa4:
22:17:17:WU01:FS00:0xa4:*------------------------------*
22:17:17:WU01:FS00:0xa4:Folding@Home Gromacs GB Core
22:17:17:WU01:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
22:17:17:WU01:FS00:0xa4:
22:17:17:WU01:FS00:0xa4:Preparing to commence simulation
22:17:17:WU01:FS00:0xa4:- Looking at optimizations...
22:17:17:WU01:FS00:0xa4:- Files status OK
22:17:17:WU01:FS00:0xa4:- Expanded 687978 -> 1530560 (decompressed 222.4 percent)
22:17:17:WU01:FS00:0xa4:Called DecompressByteArray: compressed_data_size=687978 data_size=1530560, decompressed_data_size=1530560 diff=0
22:17:17:WU01:FS00:0xa4:- Digital signature verified
22:17:17:WU01:FS00:0xa4:
22:17:17:WU01:FS00:0xa4:Project: 8055 (Run 653, Clone 7, Gen 18)
22:17:17:WU01:FS00:0xa4:
22:17:17:WU01:FS00:0xa4:Assembly optimizations on if available.
22:17:17:WU01:FS00:0xa4:Entering M.D.
22:17:21:WU00:FS00:Upload 0.89%
22:17:23:WU01:FS00:0xa4:Using Gromacs checkpoints
22:17:23:WU01:FS00:0xa4:Mapping NT from 4 to 4
22:17:25:WU01:FS00:0xa4:Resuming from checkpoint
22:17:25:WU01:FS00:0xa4:Verified 01/wudata_01.log
22:17:25:WU01:FS00:0xa4:Verified 01/wudata_01.trr
22:17:25:WU01:FS00:0xa4:Verified 01/wudata_01.xtc
22:17:25:WU01:FS00:0xa4:Verified 01/wudata_01.edr
22:17:25:WU01:FS00:0xa4:Completed 411900 out of 500000 steps  (82%)
22:17:27:WU00:FS00:Upload 8.92%
22:17:33:WU00:FS00:Upload 17.83%
22:17:39:WU00:FS00:Upload 26.75%
22:17:45:WU00:FS00:Upload 35.66%
22:17:51:WU00:FS00:Upload 44.58%
22:17:57:WU00:FS00:Upload 53.50%
22:18:03:WU00:FS00:Upload 62.41%
22:18:09:WU00:FS00:Upload 71.33%
22:18:15:WU00:FS00:Upload 80.24%
22:18:21:WU00:FS00:Upload 89.16%
22:18:27:WU00:FS00:Upload 98.07%
22:18:28:WU00:FS00:Upload complete
22:18:28:WU00:FS00:Server responded GOT_ALREADY (434)
22:18:28:WARNING:WU00:FS00:Server did not like results, dumping
22:18:28:WU00:FS00:Cleaning up
22:19:12:Server connection id=1 on 0.0.0.0:36330 from 127.0.0.1
22:19:57:WU01:FS00:0xa4:Completed 415000 out of 500000 steps  (83%)

Re: WU stuck at status=send, progress=100%

PostPosted: Sat Oct 27, 2012 11:37 pm
by bollix47
Looks good:

Hi valkyrie (team 37412),
Your WU (P11020 R0 C3608 G41) was added to the stats database on 2012-10-27 11:06:11 for 2034.7 points of credit.