QRB Points Missing (after having received them before)

Moderators: Site Moderators, FAHC Science Team

Post Reply
alfredthetomato
Posts: 1
Joined: Sat May 05, 2012 10:32 am

QRB Points Missing (after having received them before)

Post by alfredthetomato »

Around two weeks ago, my PPD dropped because I was no longer being awarded QRB points (only base points). I didn't change my config in any way, but to be sure I double checked for the passcode, which was correct. I also tried the v6 and v7 clients both on Linux and Windoze, still no change. To my knowledge there hasn't been any errors and they are being returned on time. I have a feeling that I may have disqualified myself with the 80% pass rate somehow, however I see this as unlikely seeing as I haven't seen any folding errors since the QRB points went. There has been the occasional network error when trying to upload, however it soon resolved itself and said 'Server responded WORK_ACK (400)' after it did get a connection.
I hoped that it would resolve itself if I just let it fold as is, hoping that the QRB points would return, but that hasn't happened. I'd like to know what is causing this, so that it could be fixed. :wink:

I fold as alfredthetomato btw.

Here is some typical log output:

Code: Select all

07:46:41:WU01:FS00:Final credit estimate, 1787.00 points
07:46:41:WU01:FS00:Cleaning up
07:47:03:WU00:FS00:0xa4:Completed 2500 out of 250000 steps  (1%)
---
09:05:33:WU00:FS00:0xa4:Completed 250000 out of 250000 steps  (100%)
09:05:33:WU00:FS00:0xa4:DynamicWrapper: Finished Work Unit: sleep=10000
09:05:33:WU01:FS00:Connecting to assign3.stanford.edu:8080
09:05:34:WU01:FS00:News: Welcome to Folding@Home
09:05:34:WU01:FS00:Assigned to work server 171.67.108.60
09:05:34:WU01:FS00:Requesting new work unit for slot 00: RUNNING smp:8 from 171.67.108.60
09:05:34:WU01:FS00:Connecting to 171.67.108.60:8080
09:05:35:WU01:FS00:Downloading 865.67KiB
09:05:39:WU01:FS00:Download complete
09:05:39:WU01:FS00:Received Unit: id:01 state:DOWNLOAD error:OK project:8013 run:217 clone:26 gen:19 core:0xa4 unit:0x0000001c6652edcc4f7830d8ccb29aa8
09:05:43:WU00:FS00:0xa4:
09:05:43:WU00:FS00:0xa4:Finished Work Unit:
09:05:43:WU00:FS00:0xa4:- Reading up to 1295664 from "00/wudata_01.trr": Read 1295664
09:05:43:WU00:FS00:0xa4:trr file hash check passed.
09:05:43:WU00:FS00:0xa4:- Reading up to 784656 from "00/wudata_01.xtc": Read 784656
09:05:43:WU00:FS00:0xa4:xtc file hash check passed.
09:05:43:WU00:FS00:0xa4:edr file hash check passed.
09:05:43:WU00:FS00:0xa4:logfile size: 22677
09:05:43:WU00:FS00:0xa4:Leaving Run
09:05:43:WU00:FS00:0xa4:- Writing 2108401 bytes of core data to disk...
09:05:44:WU00:FS00:0xa4:Done: 2107889 -> 2022132 (compressed to 95.9 percent)
09:05:44:WU00:FS00:0xa4:  ... Done.
09:05:45:WU00:FS00:0xa4:- Shutting down core
09:05:45:WU00:FS00:0xa4:
09:05:45:WU00:FS00:0xa4:Folding@home Core Shutdown: FINISHED_UNIT
09:05:46:WU00:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
09:05:46:WU00:FS00:Sending unit results: id:00 state:SEND error:OK project:8013 run:80 clone:7 gen:32 core:0xa4 unit:0x000000306652edcc4f72bc0934a83cff
09:05:46:WU00:FS00:Uploading 1.93MiB to 171.67.108.60
09:05:46:WU00:FS00:Connecting to 171.67.108.60:8080
09:05:46:WU01:FS00:Starting
09:05:46:WU01:FS00:Running FahCore: /opt/folding/FAHCoreWrapper /opt/folding/cores/www.stanford.edu/~pande/Linux/AMD64/Core_a4.fah/FahCore_a4 -dir 01 -suffix 01 -version 701 -lifeline 18370 -checkpoint 15 -np 8
09:05:46:WU01:FS00:Started FahCore on PID 16672
09:05:46:WU01:FS00:Core PID:16676
09:05:46:WU01:FS00:FahCore 0xa4 started
09:05:47:WU01:FS00:0xa4:
09:05:47:WU01:FS00:0xa4:*------------------------------*
09:05:47:WU01:FS00:0xa4:Folding@Home Gromacs GB Core
09:05:47:WU01:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
09:05:47:WU01:FS00:0xa4:
09:05:47:WU01:FS00:0xa4:Preparing to commence simulation
09:05:47:WU01:FS00:0xa4:- Looking at optimizations...
09:05:47:WU01:FS00:0xa4:- Created dyn
09:05:47:WU01:FS00:0xa4:- Files status OK
09:05:47:WU01:FS00:0xa4:- Expanded 885939 -> 2026476 (decompressed 228.7 percent)
09:05:47:WU01:FS00:0xa4:Called DecompressByteArray: compressed_data_size=885939 data_size=2026476, decompressed_data_size=2026476 diff=0
09:05:47:WU01:FS00:0xa4:- Digital signature verified
09:05:47:WU01:FS00:0xa4:
09:05:47:WU01:FS00:0xa4:Project: 8013 (Run 217, Clone 26, Gen 19)
09:05:47:WU01:FS00:0xa4:
09:05:47:WU01:FS00:0xa4:Assembly optimizations on if available.
09:05:47:WU01:FS00:0xa4:Entering M.D.
09:05:52:WU00:FS00:Upload 19.44%
09:05:53:WU01:FS00:0xa4:Completed 0 out of 250000 steps  (0%)
09:05:58:WU00:FS00:Upload 38.88%
09:06:04:WU00:FS00:Upload 58.32%
09:06:11:WU00:FS00:Upload 77.76%
09:06:17:WU00:FS00:Upload 97.20%
09:06:20:WU00:FS00:Upload complete
09:06:20:WU00:FS00:Server responded WORK_ACK (400)
09:06:20:WU00:FS00:Final credit estimate, 1775.00 points
09:06:20:WU00:FS00:Cleaning up
Thanks in advance.
Image
ChelseaOilman
Posts: 1037
Joined: Sun Dec 02, 2007 3:47 pm
Location: Colorado @ 10,000 feet

Re: QRB Points Missing (after having received them before)

Post by ChelseaOilman »

PM sent
Post Reply