Recently my GPU only hits 1410 MHz when it used to process at above than 1910 MHz.
I tried to reload the overclocking profile, no temperature issues.
Low PGU utilization
Moderators: Site Moderators, FAHC Science Team
-
foldy
- Posts: 2061
- Joined: Sat Dec 01, 2012 3:43 pm
- Hardware configuration: Folding@Home Client 7.6.13 (1 GPU slots)
Windows 7 64bit
Intel Core i5 2500k@4Ghz
Nvidia gtx 1080ti driver 441
Re: Low PGU utilization
That may depend on certain work units which only trigger lower GPU P-State. Or you got a bad work unit error which resets you GPU.
You can test that easily by reboot your PC. If clocks boost again to max then it was a GPU reset before. If GPU boost clock is the same then the current work unit limits GPU P-State. Your advantage: base clock also is more energy efficient than boost clocks.
You can test that easily by reboot your PC. If clocks boost again to max then it was a GPU reset before. If GPU boost clock is the same then the current work unit limits GPU P-State. Your advantage: base clock also is more energy efficient than boost clocks.
Re: Low PGU utilization
Both on Linux or Windows, you can force the GPU to run at it's max rated frequency. Even using an overclock.
Windows uses MSI Afterburner, EVGA XOC or Zotac Firestorm.
Linux uses nvidia-smi and nvidia X server.
Windows uses MSI Afterburner, EVGA XOC or Zotac Firestorm.
Linux uses nvidia-smi and nvidia X server.