Low ppd on r9 290

It seems that a lot of GPU problems revolve around specific versions of drivers. Though AMD has their own support structure, you can often learn from information reported by others who fold.

Moderators: Site Moderators, FAHC Science Team

7im
Posts: 10189
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Low ppd on r9 290

Post by 7im »

Also note that with the exponential nature of the bonus points curve, the PPD will vary quite a bit, especially with higher end cards that are further along on the points curve.

Take a look at the variations in the chart on this FAH News Blog article: http://folding.stanford.edu/home/a-peek ... marking-2/
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
7im
Posts: 10189
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Low ppd on r9 290

Post by 7im »

For reference, the fahbench comparisons... 7970 vs. R9 290 is about a 22% difference, at theoretical best. Unfortunately, driver issues play in to actual folding, and the AMD drivers lag a little behind NV drivers.

Image
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
EXT64
Posts: 323
Joined: Mon Apr 09, 2012 11:54 pm

Re: Low ppd on r9 290

Post by EXT64 »

I have two 7970s, one per system. They are using the same drivers, Fahcore, clocks (core and memory), and similar systems (3770k and 4770k). The only difference is one is Windows 8.1 and one is 7. Also, one is from the first batch, and the other brand new. Result? The new one is 5-10k PPD better than the old one. Strange things can cause PPD variation even between the same card.
PantherX
Site Moderator
Posts: 7020
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:

Re: Low ppd on r9 290

Post by PantherX »

$ilent wrote:...I used to have a r9 290x and it got 170,000ppd on an 8900 with a mild overclock, with this new r9 290 ive got no matter what I do I cant get over 130,000ppd even on the better 7810 and 7811 units...
It's my understanding that you initially had AMD R9 290X and you later changed it to an AMD R9 290, is it correct? If so, then your AMD R9 290 will be getting less points than AMD R9 290X.

Regarding the drop in points, are you, by chance running any GPU intensive applications while folding? Watching HD Videos with hardware acceleration or other stuff? If so, then it may account for (some?) drop of points since the TPF has increased.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
mdk777
Posts: 480
Joined: Fri Dec 21, 2007 4:12 am

Re: Low ppd on r9 290

Post by mdk777 »

no matter what I do I cant get over 130,000ppd even on the better 7810 and 7811 units.
Here is part of your confusion.

8900 did much better on AMD cards...on my 7970 realistic final ppd of 89-92k
7810 and 7811 might do better on NV, but on my AMD realistic final ppd of 68-70k

Hence the combination of reduced shaders and the variability in WU, and your results make sense. :mrgreen:

compare the 290x to the 290 on the 8900 WU for a more accurate comparison.

also watch temps and fan settings as the cards will clock down aggressively...to reach full potential you will have to make sure they stay cool. :wink:

Edit: on closer reading I see others have mentioned and you tried 100% fan.
I am holding off for non-reference or water cooling myself...so thanks for confirming :lol: :wink:
Transparency and Accountability, the necessary foundation of any great endeavor!
$ilent
Posts: 21
Joined: Mon Dec 26, 2011 3:29 pm

Re: Low ppd on r9 290

Post by $ilent »

mdk777 wrote:
no matter what I do I cant get over 130,000ppd even on the better 7810 and 7811 units.
Here is part of your confusion.

8900 did much better on AMD cards...on my 7970 realistic final ppd of 89-92k
7810 and 7811 might do better on NV, but on my AMD realistic final ppd of 68-70k

Hence the combination of reduced shaders and the variability in WU, and your results make sense. :mrgreen:

compare the 290x to the 290 on the 8900 WU for a more accurate comparison.
You must have a super slow 7970 if your only getting 70k ppd on a 7810/7811. I know for a fact 7970s can get up to 120k ppd when overclocked.

PantherX wrote:
$ilent wrote:...I used to have a r9 290x and it got 170,000ppd on an 8900 with a mild overclock, with this new r9 290 ive got no matter what I do I cant get over 130,000ppd even on the better 7810 and 7811 units...
It's my understanding that you initially had AMD R9 290X and you later changed it to an AMD R9 290, is it correct? If so, then your AMD R9 290 will be getting less points than AMD R9 290X.

Regarding the drop in points, are you, by chance running any GPU intensive applications while folding? Watching HD Videos with hardware acceleration or other stuff? If so, then it may account for (some?) drop of points since the TPF has increased.
I dont mean to be rude, but there is no way that the difference from a 290x to 290 is like 30% folding@home performance, the cards when benchmarked are like 5% difference.
7im
Posts: 10189
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Low ppd on r9 290

Post by 7im »

Unless you're referring to the fahbench benchmark any other benchmark means very little to PPD. Also note that fahbench uses a very small data set when doing the benchmark so in real world situations, large work units can vary quite a bit from small work units, in final PPD. The same applies when comparing one GPU to another GPU and the number of shaders is different.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
mdk777
Posts: 480
Joined: Fri Dec 21, 2007 4:12 am

Re: Low ppd on r9 290

Post by mdk777 »

I dont mean to be rude, but there is no way that the difference from a 290x to 290 is like 30% folding@home performance, the cards when benchmarked are like 5% difference.
Shader count, which is important to folding is 10%

But like I said, why don't you just compare like WU?

PS
Tom's reports worse TIM on 290 VS. 290X
http://www.tomshardware.com/reviews/rad ... ,3678.html

As I mentioned, with continuous load of FOLDING, performance is going to be very THERMAL dependent.

Open rig? ambient?
air flow. ?
Transparency and Accountability, the necessary foundation of any great endeavor!
$ilent
Posts: 21
Joined: Mon Dec 26, 2011 3:29 pm

Re: Low ppd on r9 290

Post by $ilent »

guys please stop saying ppd varies by work units...im not a noob. I know for a fact that ppd does NOT vary by 30% across the same damm work units?

@mdk777 I know performance changes with thermal limits, but ive said this numerous times now temperature is not the issue here. I am well below my thermal limit before the gpu starts throttling. Open rig, ambient less than 20c.
mdk777
Posts: 480
Joined: Fri Dec 21, 2007 4:12 am

Re: Low ppd on r9 290

Post by mdk777 »

im not a noob. I know for a fact that ppd does NOT vary by 30% across the same damm work units?
sorry, not here long enough then.
yes, given the multiplying affect of quick return bonus, differences in the compute nature of individual wu(#of atoms, forces) and the way different cards handle memory(while shaders is a large part, other architecture features do come into play)....

long story short, yes ppd have in the past and most likely will in the future vary by that much. :mrgreen:

EDIT:

ps not saying that it ideal or intentional, just that it does happen.
I am well below my thermal limit before the gpu starts throttling
you have monitored the gpu activity and it stays at 100%...never cycling down?
possibility...but not likely.
Transparency and Accountability, the necessary foundation of any great endeavor!
Post Reply