Page 1 of 1

Rx480 "Bad State detected"

Posted: Wed Jun 12, 2019 1:20 pm
by liberodaniele
Hi everyone!
I'm new to f@h and i have a problem: i have a rx480 4gb and i'm getting "FS01:0x21:Bad State detected... attempting to resume from last good checkpoint. Is your system overclocked?" error every few minutes
I'm not on oc and gpu is rock solid under 3d benchmarks, what could be the problem? I also tried to underclock (from 1306/1750 to 1200/1600) with +50% power limit, but nothing changes.

Code: Select all

12:49:12:WU01:FS01:0x21:*********************** Log Started 2019-06-12T12:49:12Z ***********************
12:49:12:WU01:FS01:0x21:Project: 11726 (Run 0, Clone 116, Gen 294)
12:49:12:WU01:FS01:0x21:Unit: 0x0000019e8ca304e75b899123d816ae90
12:49:12:WU01:FS01:0x21:CPU: 0x00000000000000000000000000000000
12:49:12:WU01:FS01:0x21:Machine: 1
12:49:12:WU01:FS01:0x21:Reading tar file core.xml
12:49:12:WU01:FS01:0x21:Reading tar file integrator.xml
12:49:12:WU01:FS01:0x21:Reading tar file state.xml
12:49:12:WU01:FS01:0x21:Reading tar file system.xml
12:49:12:WU01:FS01:0x21:Digital signatures verified
12:49:12:WU01:FS01:0x21:Folding@home GPU Core21 Folding@home Core
12:49:12:WU01:FS01:0x21:Version 0.0.18
12:49:21:WU01:FS01:0x21:Completed 0 out of 5000000 steps (0%)
12:49:21:WU01:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
12:49:23:WU01:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint. Is your system overclocked?
12:50:54:WU01:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint. Is your system overclocked?
12:51:39:WU01:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint. Is your system overclocked?
12:51:39:WU01:FS01:0x21:ERROR:114: Max Retries Reached
12:51:39:WU01:FS01:0x21:Saving result file logfile_01.txt
12:51:39:WU01:FS01:0x21:Saving result file badstate-0.xml
12:51:39:WU01:FS01:0x21:Saving result file badstate-1.xml
12:51:39:WU01:FS01:0x21:Saving result file badstate-2.xml
12:51:39:WU01:FS01:0x21:Saving result file log.txt
12:51:39:WU01:FS01:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
12:51:40:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
12:51:40:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:11726 run:0 clone:116 gen:294 core:0x21 unit:0x0000019e8ca304e75b899123d816ae90
12:51:40:WU01:FS01:Uploading 28.65MiB to 140.163.4.231
12:51:40:WU01:FS01:Connecting to 140.163.4.231:8080

Re: Rx480 "Bad State detected"

Posted: Wed Jun 12, 2019 3:16 pm
by bruce
According to that log, you've received 3 bad-state errors from that particular WU (Project: 11726 (Run 0, Clone 116, Gen 294)) That WU was then reported as FAULTY and returned after a Max Retries Reached error. At that point, you should have gotten a new assignment and moved on.

There is a small percentage of WUs which exhibit that characteristic. If it only happens rarely, don't worry about it.

Your error report was received by the server. Since the server has no way of knowing if the WU was defective or if the problem was on your machine, the WU was sent to somebody else where it failed again in a similar way. The server will now remove that WU from circulation.

Re: Rx480 "Bad State detected"

Posted: Wed Jun 12, 2019 3:40 pm
by liberodaniele
Every WU that i get is the same. Sometimes it's stop after 1/2% sometimes i can get to 15% but everyone fail. I tried at least ten different WU. I don't think i'm so unlucky so i think there is some problem on my pc, but i don't know how to find and fix it

Re: Rx480 "Bad State detected"

Posted: Wed Jun 12, 2019 4:32 pm
by JimboPalmer
We know nothing about your PC, bruce's post links to how to give use the first 200 lines of the log which includes the configuration of your PC.

Are you sure you have the latest driver direct from AMD?

https://www.amd.com/en/support/graphics ... eon-rx-480

Re: Rx480 "Bad State detected"

Posted: Wed Jun 12, 2019 8:00 pm
by liberodaniele
JimboPalmer wrote:We know nothing about your PC, bruce's post links to how to give use the first 200 lines of the log which includes the configuration of your PC.

Are you sure you have the latest driver direct from AMD?

https://www.amd.com/en/support/graphics ... eon-rx-480
Yes, i have the latest WHQL driver. Sorry for the log.

Code: Select all

*********************** Log Started 2019-06-12T17:50:52Z ***********************
17:50:52:************************* Folding@home Client *************************
17:50:52:        Website: https://foldingathome.org/
17:50:52:      Copyright: (c) 2009-2018 foldingathome.org
17:50:52:         Author: Joseph Coffland <joseph@cauldrondevelopment.com>
17:50:52:           Args: --open-web-control
17:50:52:         Config: C:\Users\maggi\AppData\Roaming\FAHClient\config.xml
17:50:52:******************************** Build ********************************
17:50:52:        Version: 7.5.1
17:50:52:           Date: May 11 2018
17:50:52:           Time: 13:06:32
17:50:52:     Repository: Git
17:50:52:       Revision: 4705bf53c635f88b8fe85af7675557e15d491ff0
17:50:52:         Branch: master
17:50:52:       Compiler: Visual C++ 2008
17:50:52:        Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
17:50:52:       Platform: win32 10
17:50:52:           Bits: 32
17:50:52:           Mode: Release
17:50:52:******************************* System ********************************
17:50:52:            CPU: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz
17:50:52:         CPU ID: GenuineIntel Family 6 Model 42 Stepping 7
17:50:52:           CPUs: 4
17:50:52:         Memory: 7.88GiB
17:50:52:    Free Memory: 1.43GiB
17:50:52:        Threads: WINDOWS_THREADS
17:50:52:     OS Version: 6.2
17:50:52:    Has Battery: false
17:50:52:     On Battery: false
17:50:52:     UTC Offset: 2
17:50:52:            PID: 4668
17:50:52:            CWD: C:\Users\maggi\AppData\Roaming\FAHClient
17:50:52:             OS: Windows 10 Enterprise
17:50:52:        OS Arch: AMD64
17:50:52:           GPUs: 1
17:50:52:          GPU 0: Bus:1 Slot:0 Func:0 AMD:5 Ellesmere XT [Radeon RX
17:50:52:                 470/480/570/580]
17:50:52:           CUDA: Not detected: Failed to open dynamic library 'nvcuda.dll':
17:50:52:                 Impossibile trovare il modulo specificato.
17:50:52:
17:50:52:OpenCL Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:1.2 Driver:2841.5
17:50:52:  Win32 Service: false
17:50:52:***********************************************************************
17:50:53:<config>
17:50:53:  <!-- Folding Core -->
17:50:53:  <checkpoint v='3'/>
17:50:53:
17:50:53:  <!-- Network -->
17:50:53:  <proxy v=':8080'/>
17:50:53:
17:50:53:  <!-- Slot Control -->
17:50:53:  <power v='FULL'/>
17:50:53:
17:50:53:  <!-- User Information -->
17:50:53:  <passkey v='********************************'/>
17:50:53:  <team v='234980'/>
17:50:53:  <user v='xndnie7gejxe'/>
17:50:53:
17:50:53:  <!-- Folding Slots -->
17:50:53:  <slot id='0' type='CPU'>
17:50:53:    <cpus v='3'/>
17:50:53:    <paused v='true'/>
17:50:53:  </slot>
17:50:53:  <slot id='1' type='GPU'>
17:50:53:    <paused v='true'/>
17:50:53:  </slot>
17:50:53:</config>
17:50:53:Trying to access database...
17:50:53:Successfully acquired database lock
17:50:53:Enabled folding slot 00: PAUSED cpu:3 (by user)
17:50:53:Enabled folding slot 01: PAUSED gpu:0:Ellesmere XT [Radeon RX 470/480/570/580] (by user)
17:50:56:7:127.0.0.1:New Web connection
17:50:58:30:127.0.0.1:New Web connection
17:51:15:FS00:Unpaused
17:51:15:FS01:Unpaused
17:51:15:WU00:FS00:Starting
17:51:15:WARNING:WU00:FS00:AS lowered CPUs from 3 to 2
17:51:15:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\maggi\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe -dir 00 -suffix 01 -version 705 -lifeline 4668 -checkpoint 3 -np 2
17:51:15:WU00:FS00:Started FahCore on PID 11548
17:51:15:WU00:FS00:Core PID:2708
17:51:15:WU00:FS00:FahCore 0xa7 started
17:51:16:WU00:FS00:0xa7:*********************** Log Started 2019-06-12T17:51:16Z ***********************
17:51:16:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
17:51:16:WU00:FS00:0xa7:       Type: 0xa7
17:51:16:WU00:FS00:0xa7:       Core: Gromacs
17:51:16:WU00:FS00:0xa7:    Website: https://foldingathome.org/
17:51:16:WU00:FS00:0xa7:  Copyright: (c) 2009-2018 foldingathome.org
17:51:16:WU00:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
17:51:16:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 705 -lifeline 11548 -checkpoint 3 -np 2
17:51:16:WU00:FS00:0xa7:     Config: <none>
17:51:16:WU00:FS00:0xa7:************************************ Build *************************************
17:51:16:WU00:FS00:0xa7:    Version: 0.0.17
17:51:16:WU00:FS00:0xa7:       Date: Apr 27 2018
17:51:16:WU00:FS00:0xa7:       Time: 16:19:36
17:51:16:WU00:FS00:0xa7: Repository: Git
17:51:16:WU00:FS00:0xa7:   Revision: 21359963583d09ec2063ef946399441c4df4ccd7
17:51:16:WU00:FS00:0xa7:     Branch: master
17:51:16:WU00:FS00:0xa7:   Compiler: Visual C++ 2008
17:51:16:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
17:51:16:WU00:FS00:0xa7:   Platform: win32 10
17:51:16:WU00:FS00:0xa7:       Bits: 64
17:51:16:WU00:FS00:0xa7:       Mode: Release
17:51:16:WU00:FS00:0xa7:       SIMD: avx_256
17:51:16:WU00:FS00:0xa7:************************************ System ************************************
17:51:16:WU00:FS00:0xa7:        CPU: Unknown
17:51:16:WU00:FS00:0xa7:     CPU ID: 
17:51:16:WU00:FS00:0xa7:       CPUs: 4
17:51:16:WU00:FS00:0xa7:     Memory: 7.88GiB
17:51:16:WU00:FS00:0xa7:Free Memory: 1.65GiB
17:51:16:WU00:FS00:0xa7:    Threads: WINDOWS_THREADS
17:51:16:WU00:FS00:0xa7: OS Version: 6.2
17:51:16:WU00:FS00:0xa7:Has Battery: false
17:51:16:WU00:FS00:0xa7: On Battery: false
17:51:16:WU00:FS00:0xa7: UTC Offset: 2
17:51:16:WU00:FS00:0xa7:        PID: 2708
17:51:16:WU00:FS00:0xa7:        CWD: C:\Users\maggi\AppData\Roaming\FAHClient\work
17:51:16:WU00:FS00:0xa7:         OS: Windows 10 Pro
17:51:16:WU00:FS00:0xa7:    OS Arch: AMD64
17:51:16:WU00:FS00:0xa7:********************************************************************************
17:51:16:WU00:FS00:0xa7:Project: 13826 (Run 434, Clone 1, Gen 28)
17:51:16:WU00:FS00:0xa7:Unit: 0x0000002080fccb095c979b2169422a89
17:51:16:WU00:FS00:0xa7:Digital signatures verified
*********************** Log Started 2019-06-12T17:50:52Z ***********************
17:50:52:************************* Folding@home Client *************************
17:50:52:        Website: https://foldingathome.org/
17:50:52:      Copyright: (c) 2009-2018 foldingathome.org
17:50:52:         Author: Joseph Coffland <joseph@cauldrondevelopment.com>
17:50:52:           Args: --open-web-control
17:50:52:         Config: C:\Users\maggi\AppData\Roaming\FAHClient\config.xml
17:50:52:******************************** Build ********************************
17:50:52:        Version: 7.5.1
17:50:52:           Date: May 11 2018
17:50:52:           Time: 13:06:32
17:50:52:     Repository: Git
17:50:52:       Revision: 4705bf53c635f88b8fe85af7675557e15d491ff0
17:50:52:         Branch: master
17:50:52:       Compiler: Visual C++ 2008
17:50:52:        Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
17:50:52:       Platform: win32 10
17:50:52:           Bits: 32
17:50:52:           Mode: Release
17:50:52:******************************* System ********************************
17:50:52:            CPU: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz
17:50:52:         CPU ID: GenuineIntel Family 6 Model 42 Stepping 7
17:50:52:           CPUs: 4
17:50:52:         Memory: 7.88GiB
17:50:52:    Free Memory: 1.43GiB
17:50:52:        Threads: WINDOWS_THREADS
17:50:52:     OS Version: 6.2
17:50:52:    Has Battery: false
17:50:52:     On Battery: false
17:50:52:     UTC Offset: 2
17:50:52:            PID: 4668
17:50:52:            CWD: C:\Users\maggi\AppData\Roaming\FAHClient
17:50:52:             OS: Windows 10 Enterprise
17:50:52:        OS Arch: AMD64
17:50:52:           GPUs: 1
17:50:52:          GPU 0: Bus:1 Slot:0 Func:0 AMD:5 Ellesmere XT [Radeon RX
17:50:52:                 470/480/570/580]
17:50:52:           CUDA: Not detected: Failed to open dynamic library 'nvcuda.dll':
17:50:52:                 Impossibile trovare il modulo specificato.
17:50:52:
17:50:52:OpenCL Device 0: Platform:0 Device:0 Bus:1 Slot:0 Compute:1.2 Driver:2841.5
17:50:52:  Win32 Service: false
17:50:52:***********************************************************************
17:50:53:<config>
17:50:53:  <!-- Folding Core -->
17:50:53:  <checkpoint v='3'/>
17:50:53:
17:50:53:  <!-- Network -->
17:50:53:  <proxy v=':8080'/>
17:50:53:
17:50:53:  <!-- Slot Control -->
17:50:53:  <power v='FULL'/>
17:50:53:
17:50:53:  <!-- User Information -->
17:50:53:  <passkey v='********************************'/>
17:50:53:  <team v='234980'/>
17:50:53:  <user v='xndnie7gejxe'/>
17:50:53:
17:50:53:  <!-- Folding Slots -->
17:50:53:  <slot id='0' type='CPU'>
17:50:53:    <cpus v='3'/>
17:50:53:    <paused v='true'/>
17:50:53:  </slot>
17:50:53:  <slot id='1' type='GPU'>
17:50:53:    <paused v='true'/>
17:50:53:  </slot>
17:50:53:</config>
17:50:53:Trying to access database...
17:50:53:Successfully acquired database lock
17:50:53:Enabled folding slot 00: PAUSED cpu:3 (by user)
17:50:53:Enabled folding slot 01: PAUSED gpu:0:Ellesmere XT [Radeon RX 470/480/570/580] (by user)
17:50:56:7:127.0.0.1:New Web connection
17:50:58:30:127.0.0.1:New Web connection
17:51:15:FS00:Unpaused
17:51:15:FS01:Unpaused
17:51:15:WU00:FS00:Starting
17:51:15:WARNING:WU00:FS00:AS lowered CPUs from 3 to 2
17:51:15:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\maggi\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe -dir 00 -suffix 01 -version 705 -lifeline 4668 -checkpoint 3 -np 2
17:51:15:WU00:FS00:Started FahCore on PID 11548
17:51:15:WU00:FS00:Core PID:2708
17:51:15:WU00:FS00:FahCore 0xa7 started
17:51:16:WU00:FS00:0xa7:*********************** Log Started 2019-06-12T17:51:16Z ***********************
17:51:16:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
17:51:16:WU00:FS00:0xa7:       Type: 0xa7
17:51:16:WU00:FS00:0xa7:       Core: Gromacs
17:51:16:WU00:FS00:0xa7:    Website: https://foldingathome.org/
17:51:16:WU00:FS00:0xa7:  Copyright: (c) 2009-2018 foldingathome.org
17:51:16:WU00:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
17:51:16:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 705 -lifeline 11548 -checkpoint 3 -np 2
17:51:16:WU00:FS00:0xa7:     Config: <none>
17:51:16:WU00:FS00:0xa7:************************************ Build *************************************
17:51:16:WU00:FS00:0xa7:    Version: 0.0.17
17:51:16:WU00:FS00:0xa7:       Date: Apr 27 2018
17:51:16:WU00:FS00:0xa7:       Time: 16:19:36
17:51:16:WU00:FS00:0xa7: Repository: Git
17:51:16:WU00:FS00:0xa7:   Revision: 21359963583d09ec2063ef946399441c4df4ccd7
17:51:16:WU00:FS00:0xa7:     Branch: master
17:51:16:WU00:FS00:0xa7:   Compiler: Visual C++ 2008
17:51:16:WU00:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
17:51:16:WU00:FS00:0xa7:   Platform: win32 10
17:51:16:WU00:FS00:0xa7:       Bits: 64
17:51:16:WU00:FS00:0xa7:       Mode: Release
17:51:16:WU00:FS00:0xa7:       SIMD: avx_256
17:51:16:WU00:FS00:0xa7:************************************ System ************************************
17:51:16:WU00:FS00:0xa7:        CPU: Unknown
17:51:16:WU00:FS00:0xa7:     CPU ID: 
17:51:16:WU00:FS00:0xa7:       CPUs: 4
17:51:16:WU00:FS00:0xa7:     Memory: 7.88GiB
17:51:16:WU00:FS00:0xa7:Free Memory: 1.65GiB
17:51:16:WU00:FS00:0xa7:    Threads: WINDOWS_THREADS
17:51:16:WU00:FS00:0xa7: OS Version: 6.2
17:51:16:WU00:FS00:0xa7:Has Battery: false
17:51:16:WU00:FS00:0xa7: On Battery: false
17:51:16:WU00:FS00:0xa7: UTC Offset: 2
17:51:16:WU00:FS00:0xa7:        PID: 2708
17:51:16:WU00:FS00:0xa7:        CWD: C:\Users\maggi\AppData\Roaming\FAHClient\work
17:51:16:WU00:FS00:0xa7:         OS: Windows 10 Pro
17:51:16:WU00:FS00:0xa7:    OS Arch: AMD64
17:51:16:WU00:FS00:0xa7:********************************************************************************
17:51:16:WU00:FS00:0xa7:Project: 13826 (Run 434, Clone 1, Gen 28)
17:51:16:WU00:FS00:0xa7:Unit: 0x0000002080fccb095c979b2169422a89
17:51:16:WU00:FS00:0xa7:Digital signatures verified
17:51:16:WU00:FS00:0xa7:Calling: mdrun -s frame28.tpr -o frame28.trr -x frame28.xtc -cpi state.cpt -cpt 3 -nt 2
17:51:17:WU00:FS00:0xa7:Steps: first=3500000 total=125000
17:51:24:WU00:FS00:0xa7:Completed 106872 out of 125000 steps (85%)
17:51:34:WU01:FS01:Connecting to 65.254.110.245:8080
17:51:35:ERROR:Receive error: 10053: Connessione interrotta dal software del computer host.
17:51:35:WU01:FS01:Assigned to work server 155.247.166.220
17:51:35:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:Ellesmere XT [Radeon RX 470/480/570/580] from 155.247.166.220
17:51:35:WU01:FS01:Connecting to 155.247.166.220:8080
17:51:36:WU01:FS01:Downloading 837.04KiB
17:51:40:WU01:FS01:Download complete
17:51:40:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:14166 run:10 clone:30 gen:77 core:0x21 unit:0x000000830002894c5c38c052b4ffe743
17:51:40:WU01:FS01:Starting
17:51:40:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\maggi\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/ATI/R600/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 705 -lifeline 4668 -checkpoint 3 -gpu-vendor amd -opencl-platform 0 -opencl-device 0 -gpu 0
17:51:40:WU01:FS01:Started FahCore on PID 5972
17:51:40:WU01:FS01:Core PID:7880
17:51:40:WU01:FS01:FahCore 0x21 started
17:51:41:WU01:FS01:0x21:*********************** Log Started 2019-06-12T17:51:40Z ***********************
17:51:41:WU01:FS01:0x21:Project: 14166 (Run 10, Clone 30, Gen 77)
17:51:41:WU01:FS01:0x21:Unit: 0x000000830002894c5c38c052b4ffe743
17:51:41:WU01:FS01:0x21:CPU: 0x00000000000000000000000000000000
17:51:41:WU01:FS01:0x21:Machine: 1
17:51:41:WU01:FS01:0x21:Reading tar file core.xml
17:51:41:WU01:FS01:0x21:Reading tar file integrator.xml
17:51:41:WU01:FS01:0x21:Reading tar file state.xml
17:51:41:WU01:FS01:0x21:Reading tar file system.xml
17:51:41:WU01:FS01:0x21:Digital signatures verified
17:51:41:WU01:FS01:0x21:Folding@home GPU Core21 Folding@home Core
17:51:41:WU01:FS01:0x21:Version 0.0.18
17:51:52:WU01:FS01:0x21:ERROR:NaNs detected in forces. 0 0
17:51:52:WU01:FS01:0x21:Saving result file logfile_01.txt
17:51:52:WU01:FS01:0x21:Saving result file log.txt
17:51:52:WU01:FS01:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
17:51:52:WARNING:WU01:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
17:51:52:WU01:FS01:Sending unit results: id:01 state:SEND error:FAULTY project:14166 run:10 clone:30 gen:77 core:0x21 unit:0x000000830002894c5c38c052b4ffe743
17:51:52:WU01:FS01:Uploading 2.28KiB to 155.247.166.220
17:51:52:WU01:FS01:Connecting to 155.247.166.220:8080
17:51:53:WU02:FS01:Connecting to 65.254.110.245:8080
17:51:53:WU01:FS01:Upload complete
17:51:53:WU01:FS01:Server responded WORK_ACK (400)
17:51:53:WU01:FS01:Cleaning up
17:51:54:Removing old file 'configs/config-20190612-101553.xml'
17:51:54:Saving configuration to config.xml
17:51:54:<config>
17:51:54:  <!-- Folding Core -->
17:51:54:  <checkpoint v='3'/>
17:51:54:
17:51:54:  <!-- Network -->
17:51:54:  <proxy v=':8080'/>
17:51:54:
17:51:54:  <!-- Slot Control -->
17:51:54:  <power v='FULL'/>
17:51:54:
17:51:54:  <!-- User Information -->
17:51:54:  <passkey v='********************************'/>
17:51:54:  <team v='234980'/>
17:51:54:  <user v='xndnie7gejxe'/>
17:51:54:
17:51:54:  <!-- Folding Slots -->
17:51:54:  <slot id='0' type='CPU'>
17:51:54:    <cpus v='3'/>
17:51:54:  </slot>
17:51:54:  <slot id='1' type='GPU'/>
17:51:54:</config>
17:51:54:WU02:FS01:Assigned to work server 140.163.4.231
17:51:54:WU02:FS01:Requesting new work unit for slot 01: READY gpu:0:Ellesmere XT [Radeon RX 470/480/570/580] from 140.163.4.231
17:51:54:WU02:FS01:Connecting to 140.163.4.231:8080
17:51:55:WU02:FS01:Downloading 11.29MiB
17:52:01:WU02:FS01:Download 60.90%
17:52:04:WU02:FS01:Download complete
17:52:04:WU02:FS01:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:11720 run:0 clone:2995 gen:225 core:0x21 unit:0x0000012a8ca304e75bbcea06c5481539
17:52:04:WU02:FS01:Starting
17:52:04:WU02:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\maggi\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/ATI/R600/Core_21.fah/FahCore_21.exe -dir 02 -suffix 01 -version 705 -lifeline 4668 -checkpoint 3 -gpu-vendor amd -opencl-platform 0 -opencl-device 0 -gpu 0
17:52:04:WU02:FS01:Started FahCore on PID 2512
17:52:04:WU02:FS01:Core PID:128
17:52:04:WU02:FS01:FahCore 0x21 started
17:52:05:WU02:FS01:0x21:*********************** Log Started 2019-06-12T17:52:04Z ***********************
17:52:05:WU02:FS01:0x21:Project: 11720 (Run 0, Clone 2995, Gen 225)
17:52:05:WU02:FS01:0x21:Unit: 0x0000012a8ca304e75bbcea06c5481539
17:52:05:WU02:FS01:0x21:CPU: 0x00000000000000000000000000000000
17:52:05:WU02:FS01:0x21:Machine: 1
17:52:05:WU02:FS01:0x21:Reading tar file core.xml
17:52:05:WU02:FS01:0x21:Reading tar file integrator.xml
17:52:05:WU02:FS01:0x21:Reading tar file state.xml
17:52:05:WU02:FS01:0x21:Reading tar file system.xml
17:52:05:WU02:FS01:0x21:Digital signatures verified
17:52:05:WU02:FS01:0x21:Folding@home GPU Core21 Folding@home Core
17:52:05:WU02:FS01:0x21:Version 0.0.18
17:52:20:WU02:FS01:0x21:Completed 0 out of 5000000 steps (0%)
17:52:20:WU02:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
17:54:15:WU02:FS01:0x21:Completed 50000 out of 5000000 steps (1%)
17:56:11:WU02:FS01:0x21:Completed 100000 out of 5000000 steps (2%)
17:57:06:WU00:FS00:0xa7:Completed 107500 out of 125000 steps (86%)
17:58:01:WU02:FS01:0x21:Completed 150000 out of 5000000 steps (3%)
17:59:56:WU02:FS01:0x21:Completed 200000 out of 5000000 steps (4%)
18:01:56:WU02:FS01:0x21:Completed 250000 out of 5000000 steps (5%)
18:02:23:ERROR:Receive error: 10053: Connessione interrotta dal software del computer host.
18:02:39:ERROR:Receive error: 10053: Connessione interrotta dal software del computer host.
18:03:50:WU02:FS01:0x21:Completed 300000 out of 5000000 steps (6%)
...
18:44:29:WU02:FS01:0x21:Completed 1400000 out of 5000000 steps (28%)
18:45:43:Removing old file 'configs/config-20190612-101600.xml'
18:45:43:Saving configuration to config.xml
18:45:43:<config>
18:45:43:  <!-- Folding Core -->
18:45:43:  <checkpoint v='30'/>
18:45:43:
18:45:43:  <!-- Network -->
18:45:43:  <proxy v=':8080'/>
18:45:43:
18:45:43:  <!-- Slot Control -->
18:45:43:  <power v='FULL'/>
18:45:43:
18:45:43:  <!-- User Information -->
18:45:43:  <passkey v='********************************'/>
18:45:43:  <team v='234980'/>
18:45:43:  <user v='xndnie7gejxe'/>
18:45:43:
18:45:43:  <!-- Folding Slots -->
18:45:43:  <slot id='0' type='CPU'>
18:45:43:    <cpus v='3'/>
18:45:43:  </slot>
18:45:43:  <slot id='1' type='GPU'/>
18:45:43:</config>
18:45:47:Removing old file 'configs/config-20190612-104514.xml'
18:45:47:Saving configuration to config.xml
18:45:47:<config>
18:45:47:  <!-- Folding Core -->
18:45:47:  <checkpoint v='30'/>
18:45:47:
18:45:47:  <!-- Network -->
18:45:47:  <proxy v=':8080'/>
18:45:47:
18:45:47:  <!-- Slot Control -->
18:45:47:  <power v='FULL'/>
18:45:47:
18:45:47:  <!-- User Information -->
18:45:47:  <passkey v='********************************'/>
18:45:47:  <team v='234980'/>
18:45:47:  <user v='xndnie7gejxe'/>
18:45:47:
18:45:47:  <!-- Folding Slots -->
18:45:47:  <slot id='0' type='CPU'>
18:45:47:    <cpus v='3'/>
18:45:47:  </slot>
18:45:47:  <slot id='1' type='GPU'/>
18:45:47:</config>
18:46:16:WU02:FS01:0x21:Completed 1450000 out of 5000000 steps (29%)
18:47:03:WU00:FS00:0xa7:Completed 113750 out of 125000 steps (91%)
18:47:16:WU02:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint. Is your system overclocked?
18:49:04:WU02:FS01:0x21:Completed 1300000 out of 5000000 steps (26%)
18:50:48:WU02:FS01:0x21:Completed 1350000 out of 5000000 steps (27%)
18:51:55:Removing old file 'configs/config-20190612-104529.xml'
18:51:55:Saving configuration to config.xml
18:51:55:<config>
18:51:55:  <!-- Folding Core -->
18:51:55:  <checkpoint v='3'/>
18:51:55:
18:51:55:  <!-- Network -->
18:51:55:  <proxy v=':8080'/>
18:51:55:
18:51:55:  <!-- Slot Control -->
18:51:55:  <power v='FULL'/>
18:51:55:
18:51:55:  <!-- User Information -->
18:51:55:  <passkey v='********************************'/>
18:51:55:  <team v='234980'/>
18:51:55:  <user v='xndnie7gejxe'/>
18:51:55:
18:51:55:  <!-- Folding Slots -->
18:51:55:  <slot id='0' type='CPU'>
18:51:55:    <cpus v='3'/>
18:51:55:  </slot>
18:51:55:  <slot id='1' type='GPU'/>
18:51:55:</config>
18:52:30:WU00:FS00:0xa7:Completed 115000 out of 125000 steps (92%)
18:52:35:WU02:FS01:0x21:Completed 1400000 out of 5000000 steps (28%)
18:52:54:Removing old file 'configs/config-20190612-105227.xml'
18:52:54:Saving configuration to config.xml
18:52:54:<config>
18:52:54:  <!-- Folding Core -->
18:52:54:  <checkpoint v='3'/>
18:52:54:
18:52:54:  <!-- Network -->
18:52:54:  <proxy v=':8080'/>
18:52:54:
18:52:54:  <!-- Slot Control -->
18:52:54:  <power v='FULL'/>
18:52:54:
18:52:54:  <!-- User Information -->
18:52:54:  <passkey v='********************************'/>
18:52:54:  <team v='234980'/>
18:52:54:  <user v='xndnie7gejxe'/>
18:52:54:
18:52:54:  <!-- Folding Slots -->
18:52:54:  <slot id='0' type='CPU'>
18:52:54:    <cpus v='3'/>
18:52:54:  </slot>
18:52:54:  <slot id='1' type='GPU'/>
18:52:54:</config>
18:54:53:WU02:FS01:0x21:Completed 1450000 out of 5000000 steps (29%)
18:57:17:WU02:FS01:0x21:Completed 1500000 out of 5000000 steps (30%)
18:57:50:WU02:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint. Is your system overclocked?
18:58:29:WU02:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint. Is your system overclocked?
18:58:29:WU02:FS01:0x21:ERROR:114: Max Retries Reached
18:58:29:WU02:FS01:0x21:Saving result file logfile_01.txt
18:58:29:WU02:FS01:0x21:Saving result file badstate-0.xml
18:58:29:WU02:FS01:0x21:Saving result file badstate-1.xml
18:58:29:WU02:FS01:0x21:Saving result file badstate-2.xml
18:58:29:WU02:FS01:0x21:Saving result file log.txt
18:58:29:WU02:FS01:0x21:Folding@home Core Shutdown: BAD_WORK_UNIT
18:58:30:WARNING:WU02:FS01:FahCore returned: BAD_WORK_UNIT (114 = 0x72)
18:58:30:WU02:FS01:Sending unit results: id:02 state:SEND error:FAULTY project:11720 run:0 clone:2995 gen:225 core:0x21 unit:0x0000012a8ca304e75bbcea06c5481539
18:58:30:WU02:FS01:Uploading 10.93MiB to 140.163.4.231
18:58:30:WU02:FS01:Connecting to 140.163.4.231:8080
18:58:31:WU01:FS01:Connecting to 65.254.110.245:8080
18:58:31:WU01:FS01:Assigned to work server 140.163.4.231
18:58:31:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:Ellesmere XT [Radeon RX 470/480/570/580] from 140.163.4.231
18:58:31:WU01:FS01:Connecting to 140.163.4.231:8080
18:58:32:WU01:FS01:Downloading 25.27MiB
18:58:36:WU02:FS01:Upload 4.00%
18:58:38:WU01:FS01:Download 11.87%
18:58:44:WU01:FS01:Download 42.04%
18:58:45:WU02:FS01:Upload 6.86%
18:58:50:WU01:FS01:Download 72.45%
18:58:54:WU02:FS01:Upload 8.58%
18:58:55:WU01:FS01:Download complete
18:58:55:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:11718 run:0 clone:2033 gen:190 core:0x21 unit:0x0000010a8ca304e75bbce89ad91cc828
18:58:55:WU01:FS01:Starting
18:58:55:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\maggi\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/ATI/R600/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 705 -lifeline 4668 -checkpoint 3 -gpu-vendor amd -opencl-platform 0 -opencl-device 0 -gpu 0
18:58:55:WU01:FS01:Started FahCore on PID 12776
18:58:55:WU01:FS01:Core PID:12760
18:58:55:WU01:FS01:FahCore 0x21 started
18:58:56:WU01:FS01:0x21:*********************** Log Started 2019-06-12T18:58:55Z ***********************
18:58:56:WU01:FS01:0x21:Project: 11718 (Run 0, Clone 2033, Gen 190)
18:58:56:WU01:FS01:0x21:Unit: 0x0000010a8ca304e75bbce89ad91cc828
18:58:56:WU01:FS01:0x21:CPU: 0x00000000000000000000000000000000
18:58:56:WU01:FS01:0x21:Machine: 1
18:58:56:WU01:FS01:0x21:Reading tar file core.xml
18:58:56:WU01:FS01:0x21:Reading tar file integrator.xml
18:58:56:WU01:FS01:0x21:Reading tar file state.xml
18:58:56:WU01:FS01:0x21:Reading tar file system.xml
18:58:57:WU01:FS01:0x21:Digital signatures verified
18:58:57:WU01:FS01:0x21:Folding@home GPU Core21 Folding@home Core
18:58:57:WU01:FS01:0x21:Version 0.0.18
18:59:00:WU02:FS01:Upload 9.15%
18:59:06:WU02:FS01:Upload 13.16%
18:59:10:WU01:FS01:0x21:Completed 0 out of 5000000 steps (0%)
18:59:10:WU01:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
18:59:12:WU02:FS01:Upload 17.16%
18:59:15:FS01:Paused
18:59:15:FS01:Shutting core down
18:59:16:WU01:FS01:0x21:WARNING:Console control signal 1 on PID 12760
18:59:16:WU01:FS01:0x21:Exiting, please wait. . .
18:59:16:WU01:FS01:0x21:Folding@home Core Shutdown: INTERRUPTED
18:59:16:WU01:FS01:FahCore returned: INTERRUPTED (102 = 0x66)
18:59:18:WU02:FS01:Upload 21.16%
18:59:24:WU00:FS00:0xa7:Completed 116250 out of 125000 steps (93%)
18:59:24:WU02:FS01:Upload 25.74%
..
19:00:01:Removing old file 'configs/config-20190612-105305.xml'
19:00:01:Saving configuration to config.xml
19:00:01:<config>
19:00:01:  <!-- Folding Core -->
19:00:01:  <checkpoint v='3'/>
19:00:01:
19:00:01:  <!-- Network -->
19:00:01:  <proxy v=':8080'/>
19:00:01:
19:00:01:  <!-- Slot Control -->
19:00:01:  <power v='FULL'/>
19:00:01:
19:00:01:  <!-- User Information -->
19:00:01:  <passkey v='********************************'/>
19:00:01:  <team v='234980'/>
19:00:01:  <user v='xndnie7gejxe'/>
19:00:01:
19:00:01:  <!-- Folding Slots -->
19:00:01:  <slot id='0' type='CPU'>
19:00:01:    <cpus v='3'/>
19:00:01:  </slot>
19:00:01:  <slot id='1' type='GPU'>
19:00:01:    <paused v='true'/>
19:00:01:  </slot>
19:00:01:</config>
19:00:01:WU02:FS01:Upload 52.05%
..
19:01:08:WU02:FS01:Upload 99.53%
19:01:09:WU02:FS01:Upload complete
19:01:09:WU02:FS01:Server responded WORK_ACK (400)
19:01:09:WU02:FS01:Cleaning up
19:05:49:WU00:FS00:0xa7:Completed 117500 out of 125000 steps (94%)
19:12:00:WU00:FS00:0xa7:Completed 118750 out of 125000 steps (95%)
19:13:55:67:127.0.0.1:New Web connection
19:18:20:WU00:FS00:0xa7:Completed 120000 out of 125000 steps (96%)
..
19:40:14:WU00:FS00:0xa7:Completed 123750 out of 125000 steps (99%)
19:40:15:WU02:FS00:Connecting to 65.254.110.245:8080
19:40:16:WU02:FS00:Assigned to work server 128.252.203.9
19:40:16:WU02:FS00:Requesting new work unit for slot 00: RUNNING cpu:3 from 128.252.203.9
19:40:16:WU02:FS00:Connecting to 128.252.203.9:8080
19:40:17:WU02:FS00:Downloading 8.14MiB
19:40:23:WU02:FS00:Download 86.00%
19:40:23:WU02:FS00:Download complete
19:40:23:WU02:FS00:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:13824 run:583 clone:0 gen:29 core:0xa7 unit:0x0000002280fccb095c924898c22617ac
19:47:20:WU00:FS00:0xa7:Completed 125000 out of 125000 steps (100%)
19:47:24:WU00:FS00:0xa7:Saving result file ..\logfile_01.txt
19:47:24:WU00:FS00:0xa7:Saving result file frame28.trr
19:47:25:WU00:FS00:0xa7:Saving result file frame28.xtc
19:47:25:WU00:FS00:0xa7:Saving result file md.log
19:47:25:WU00:FS00:0xa7:Saving result file science.log
19:47:25:WU00:FS00:0xa7:Folding@home Core Shutdown: FINISHED_UNIT
19:47:26:WU00:FS00:FahCore returned: FINISHED_UNIT (100 = 0x64)
19:47:26:WU00:FS00:Sending unit results: id:00 state:SEND error:NO_ERROR project:13826 run:434 clone:1 gen:28 core:0xa7 unit:0x0000002080fccb095c979b2169422a89
19:47:26:WU00:FS00:Uploading 55.93MiB to 128.252.203.9
19:47:26:WU00:FS00:Connecting to 128.252.203.9:8080
19:47:26:WU02:FS00:Starting
19:47:26:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\Users\maggi\AppData\Roaming\FAHClient\cores/cores.foldingathome.org/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe -dir 02 -suffix 01 -version 705 -lifeline 4668 -checkpoint 3 -np 3
19:47:26:WU02:FS00:Started FahCore on PID 2532
19:47:26:WU02:FS00:Core PID:13640
19:47:26:WU02:FS00:FahCore 0xa7 started
19:47:26:WU02:FS00:0xa7:*********************** Log Started 2019-06-12T19:47:26Z ***********************
19:47:26:WU02:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
19:47:26:WU02:FS00:0xa7:       Type: 0xa7
19:47:26:WU02:FS00:0xa7:       Core: Gromacs
19:47:26:WU02:FS00:0xa7:    Website: https://foldingathome.org/
19:47:26:WU02:FS00:0xa7:  Copyright: (c) 2009-2018 foldingathome.org
19:47:26:WU02:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
19:47:26:WU02:FS00:0xa7:       Args: -dir 02 -suffix 01 -version 705 -lifeline 2532 -checkpoint 3 -np 3
19:47:26:WU02:FS00:0xa7:     Config: <none>
19:47:26:WU02:FS00:0xa7:************************************ Build *************************************
19:47:26:WU02:FS00:0xa7:    Version: 0.0.17
19:47:26:WU02:FS00:0xa7:       Date: Apr 27 2018
19:47:26:WU02:FS00:0xa7:       Time: 16:19:36
19:47:26:WU02:FS00:0xa7: Repository: Git
19:47:26:WU02:FS00:0xa7:   Revision: 21359963583d09ec2063ef946399441c4df4ccd7
19:47:26:WU02:FS00:0xa7:     Branch: master
19:47:26:WU02:FS00:0xa7:   Compiler: Visual C++ 2008
19:47:26:WU02:FS00:0xa7:    Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox /MT
19:47:26:WU02:FS00:0xa7:   Platform: win32 10
19:47:26:WU02:FS00:0xa7:       Bits: 64
19:47:26:WU02:FS00:0xa7:       Mode: Release
19:47:26:WU02:FS00:0xa7:       SIMD: avx_256
19:47:26:WU02:FS00:0xa7:************************************ System ************************************
19:47:26:WU02:FS00:0xa7:        CPU: Unknown
19:47:26:WU02:FS00:0xa7:     CPU ID: 
19:47:26:WU02:FS00:0xa7:       CPUs: 4
19:47:26:WU02:FS00:0xa7:     Memory: 7.88GiB
19:47:26:WU02:FS00:0xa7:Free Memory: 2.69GiB
19:47:26:WU02:FS00:0xa7:    Threads: WINDOWS_THREADS
19:47:26:WU02:FS00:0xa7: OS Version: 6.2
19:47:26:WU02:FS00:0xa7:Has Battery: false
19:47:26:WU02:FS00:0xa7: On Battery: false
19:47:26:WU02:FS00:0xa7: UTC Offset: 2
19:47:26:WU02:FS00:0xa7:        PID: 13640
19:47:26:WU02:FS00:0xa7:        CWD: C:\Users\maggi\AppData\Roaming\FAHClient\work
19:47:26:WU02:FS00:0xa7:         OS: Windows 10 Pro
19:47:26:WU02:FS00:0xa7:    OS Arch: AMD64
19:47:26:WU02:FS00:0xa7:********************************************************************************
19:47:26:WU02:FS00:0xa7:Project: 13824 (Run 583, Clone 0, Gen 29)
19:47:26:WU02:FS00:0xa7:Unit: 0x0000002280fccb095c924898c22617ac
19:47:26:WU02:FS00:0xa7:Reading tar file core.xml
19:47:26:WU02:FS00:0xa7:Reading tar file frame29.tpr
19:47:26:WU02:FS00:0xa7:Digital signatures verified
19:47:26:WU02:FS00:0xa7:Calling: mdrun -s frame29.tpr -o frame29.trr -x frame29.xtc -cpt 3 -nt 3
19:47:27:WU02:FS00:0xa7:Steps: first=3625000 total=125000
19:47:31:WU02:FS00:0xa7:Completed 1 out of 125000 steps (0%)
19:47:32:WU00:FS00:Upload 0.78%
..
19:53:24:WU00:FS00:Upload 47.83%
19:53:29:WU02:FS00:0xa7:Completed 1250 out of 125000 steps (1%)
19:53:30:WU00:FS00:Upload 48.72%
...
19:57:54:WU00:FS00:Upload 84.81%
19:57:54:FS00:Paused
19:57:54:FS00:Shutting core down
19:57:54:WU02:FS00:0xa7:WARNING:Console control signal 1 on PID 13640
19:57:54:WU02:FS00:0xa7:Exiting, please wait. . .
19:57:58:Removing old file 'configs/config-20190612-122042.xml'
19:57:58:Saving configuration to config.xml
19:57:58:<config>
19:57:58:  <!-- Folding Core -->
19:57:58:  <checkpoint v='3'/>
19:57:58:
19:57:58:  <!-- Network -->
19:57:58:  <proxy v=':8080'/>
19:57:58:
19:57:58:  <!-- Slot Control -->
19:57:58:  <power v='FULL'/>
19:57:58:
19:57:58:  <!-- User Information -->
19:57:58:  <passkey v='********************************'/>
19:57:58:  <team v='234980'/>
19:57:58:  <user v='xndnie7gejxe'/>
19:57:58:
19:57:58:  <!-- Folding Slots -->
19:57:58:  <slot id='0' type='CPU'>
19:57:58:    <cpus v='3'/>
19:57:58:    <paused v='true'/>
19:57:58:  </slot>
19:57:58:  <slot id='1' type='GPU'>
19:57:58:    <paused v='true'/>
19:57:58:  </slot>
19:57:58:</config>
19:57:59:WU02:FS00:0xa7:Folding@home Core Shutdown: INTERRUPTED
19:58:00:WU02:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
19:58:00:WU00:FS00:Upload 85.71%
..
19:59:37:WU00:FS00:Upload 99.67%
19:59:41:WU00:FS00:Upload complete
19:59:41:WU00:FS00:Server responded WORK_ACK (400)
19:59:41:WU00:FS00:Final credit estimate, 2965.00 points
19:59:41:WU00:FS00:Cleaning up

Re: Rx480 "Bad State detected"

Posted: Wed Jun 12, 2019 10:39 pm
by JimboPalmer
Just an aside, I think your i5 supports 4 threads
17:50:52: CPUs: 4
You have set it to use 3 threads
17:50:53: <cpus v='3'/>
and because you use a GPU, the client sets it to 2 threads
17:51:15:WARNING:WU00:FS00:AS lowered CPUs from 3 to 2
17:51:16:WU00:FS00:0xa7:Calling: mdrun -s frame28.tpr -o frame28.trr -x frame28.xtc -cpi state.cpt -cpt 3 -nt 2 (nt 2 is two threads)

This is not the GPU problem, but if you leave CPUs at 4 or -1, you will get more CPU points.

Deeper in the log, you are running all four threads, so the client uses 3. So you may have already fixed this.

19:47:26:WU02:FS00:0xa7:Calling: mdrun -s frame29.tpr -o frame29.trr -x frame29.xtc -cpt 3 -nt 3 (nt 3 is three threads)

Re: Rx480 "Bad State detected"

Posted: Thu Jun 13, 2019 3:10 am
by bruce
bruce wrote:Your error report was received by the server. Since the server has no way of knowing if the WU was defective or if the problem was on your machine, the WU was sent to somebody else where it failed again in a similar way.
It's interesting to note that the WU was then reissued to a third donor who was able to complete it successfully. I have no explanation why it failed twice and succeeded the third time.

Re: Rx480 "Bad State detected"

Posted: Thu Jun 13, 2019 6:13 am
by foldy
Maybe your GPU is bad for FAH even if it runs 3d benchmarks or games flawlessly.

Re: Rx480 "Bad State detected"

Posted: Wed Jun 19, 2019 11:47 pm
by NuovaApe
Saw this in my log tonight:

...
22:52:36:WU00:FS01:0x21:Completed 875000 out of 12500000 steps (7%)
22:53:17:WU01:FS00:0x21:Completed 112500 out of 1250000 steps (9%)
22:53:30:WU00:FS01:0x21:Bad State detected... attempting to resume from last good checkpoint. Is your system overclocked?
22:54:38:WU01:FS00:0x21:Completed 125000 out of 1250000 steps (10%)
22:55:59:WU01:FS00:0x21:Completed 137500 out of 1250000 steps (11%)
22:56:58:WU00:FS01:0x21:Completed 1000000 out of 12500000 steps (8%)
22:57:21:WU01:FS00:0x21:Completed 150000 out of 1250000 steps (12%)
22:58:42:WU00:FS01:0x21:Completed 1125000 out of 12500000 steps (9%)
...

It is not overclocked. It is my AMD RX480 running alongside my new AMD Vega 56 (FS00) with same latest drivers supporting both.

RX480 running 14163 (20, 37, 32). 8 pin PCI power cable backed by a 750W PSU.

Nothing more to add other than 1st time I've seen this message, and it was using an RX480...

Re: Rx480 "Bad State detected"

Posted: Thu Jun 20, 2019 12:16 am
by JimboPalmer
Your log above says you have 1 Hardware GPU.
Your log shows one GPU slot configured.

Now your new log shows 2 WUs running at once and you make the claim that they are different products.

One way of getting very bad help is to give us very poor data.


If I had to guess, you have added hardware without re-installing (from scratch) the F@H client. It does a MUCH better job of sorting out hardware during installation. Be sure no configuration data exists after you un-install, you WANT the new install to search from scratch.

And now it makes more sense why you are only using 2 CPU threads, you need two threads to drive two GPUs.

After you get it re-installed, post the log so we can look at the hardware you really have.

Re: Rx480 "Bad State detected"

Posted: Thu Jun 20, 2019 7:03 am
by NuovaApe
JimboPalmer wrote:Your log above says you have 1 Hardware GPU.
Your log shows one GPU slot configured.

Now your new log shows 2 WUs running at once and you make the claim that they are different products.

One way of getting very bad help is to give us very poor data.
@JimboPalmer I am not the OP. I can take a photo showing the 2 different products installed:wink:

I was adding to the noise by stating I too have an RX480 and I too saw that error message.

I've never seen the error in relation to the Vega. The vega has done maybe 25 WUs the 480 maybe 4. Installed the 480 yesterday, the vega a week ago.

Re: Rx480 "Bad State detected"

Posted: Thu Jun 20, 2019 12:25 pm
by foldy
Could be a driver issue or RX480 is not stable for FAH. One or two bad states the work unit can continue but more than 3 it will finally fail.

Re: Rx480 "Bad State detected"

Posted: Thu Jun 27, 2019 7:20 am
by NuovaApe
Had a 3x failed one, although the failures occurred reasonable time periods apart, not contiguously.

The RX480 was not overclocked. It was running "PCIe x16 3.0 @ x4 v1.1".

Radeon Vega 56 is in the prime PCIe slot.

My previous mobo died last week so I hastily replaced with an upgrade (Intel Z170 chips to Z270). I didn't read the small-print stating the 2nd PCIe 3.0 x16 "Crossfire Ready" slot only ran x4 v1.1. Disgusted with that dubious advertising. The 480 went from circa 3 hours to 7 hours per WU.

It was running in Radeons "GPU Workload=Graphics" when the WU failed. I was using Workload=Compute prior to the mobo change and didn't notice any sequential errors.

I've ordered another mobo with symmetrical balls and will put back into Compute mode when it arrives.