Oh i should also mention a few other things. my temps are much lower since i replaced the ram. this was because i found i had inadvertently installed all my fans to point inwards. This was restricting the airflow and causing temps to jump. I reversed one case fan and the CPU AIO fan and now the CPU temps rarely go above 63 degrees C. Also with the fan profile a little more aggressive for the GPU those temps rarely hit 70 now and usually stay below 65. Here are my new specs:
Ryzen 7 3800X @ 4.1GHz
OLOy Warhawk memory 16GB @ DDR4-3200
ASUS ROG STRIX x470-F Gaming motherboard
WD Black SN750 NVMe PCIe M.2 500G
RX590 Fatboy OC+ @ 1520MHz (underclocked)
XFX RX590 Fatboy OC+ Tips
Moderators: Site Moderators, FAHC Science Team
-
Neil-B
- Posts: 2027
- Joined: Sun Mar 22, 2020 5:52 pm
- Hardware configuration: 1: 2x Xeon E5-2697v3@2.60GHz, 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon E3-1505Mv5@2.80GHz, 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: i7-960@3.20GHz, 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21 - Location: UK
Re: XFX RX590 Fatboy OC+ Tips
I know people like positive pressure in their case but 
… Good to hear you have got things sorted 
… Good to hear you have got things sorted 2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070
(Green/Bold = Active)