Radeon HD 6700 Support

Post requests to add new GPUs to the official whitelist here.

Moderators: Site Moderators, FAHC Science Team

Post Reply
imnuts
Posts: 7
Joined: Sat Jan 10, 2009 6:37 pm

Radeon HD 6700 Support

Post by imnuts »

I just installed the latest version of the F@H and noticed that it is supposed to support the Radeon 6700 series now. However, when the system tries to start up the GPU client, it continually crashes. Here is the log from the GPU client, which has the same error repeating. It is on the supported GPU list, and I even put the GPUs.txt file in place and restarted the client, but it still isn't working. Anyone know how to fix this? Or do you need more information to be able to fix it?

Code: Select all

03:44:18:Saving configuration to config.xml
03:44:18:<config>
03:44:18:  <!-- FahCore Control -->
03:44:18:  <checkpoint v='3'/>
03:44:18:
03:44:18:  <!-- Folding Slot Configuration -->
03:44:18:  <gpu v='true'/>
03:44:18:
03:44:18:  <!-- Logging -->
03:44:18:  <verbosity v='5'/>
03:44:18:
03:44:18:  <!-- Network -->
03:44:18:  <proxy v=':8080'/>
03:44:18:
03:44:18:  <!-- User Information -->
03:44:18:  <passkey v='********************************'/>
03:44:18:  <team v='13790'/>
03:44:18:  <user v='imnuts'/>
03:44:18:
03:44:18:  <!-- Folding Slots -->
03:44:18:  <slot id='0' type='GPU'/>
03:44:18:  <slot id='1' type='SMP'/>
03:44:18:</config>
03:45:10:WU00:FS00:Connecting to assign-GPU.stanford.edu:80
03:45:10:WU00:FS00:News: Welcome to Folding@Home
03:45:10:WU00:FS00:Assigned to work server 171.67.108.44
03:45:10:WU00:FS00:Requesting new work unit for slot 00: READY gpu:0:"Juniper XT [AMD Radeon HD 6000 Series]" from 171.67.108.44
03:45:10:WU00:FS00:Connecting to 171.67.108.44:8080
03:45:11:WU00:FS00:Downloading 44.37KiB
03:45:12:WU00:FS00:Download complete
03:45:12:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:OK project:11293 run:0 clone:315 gen:4 core:0x16 unit:0x0000005f6652edbc4d9255d5546c9b30
03:45:12:WU00:FS00:Starting
03:45:12:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_16.fah/FahCore_16.exe -dir 00 -suffix 01 -version 701 -lifeline 6280 -checkpoint 3 -gpu 0 -service
03:45:12:WU00:FS00:Started FahCore on PID 3976
03:45:12:Started thread 12 on PID 6280
03:45:12:WU00:FS00:Core PID:6816
03:45:12:WU00:FS00:FahCore 0x16 started
03:45:13:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1073741515 = 0xc0000135)
03:45:13:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
03:45:13:WU00:FS00:Starting
03:45:13:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_16.fah/FahCore_16.exe -dir 00 -suffix 01 -version 701 -lifeline 6280 -checkpoint 3 -gpu 0 -service
03:45:13:WU00:FS00:Started FahCore on PID 6808
03:45:13:Started thread 13 on PID 6280
03:45:13:WU00:FS00:Core PID:4420
03:45:13:WU00:FS00:FahCore 0x16 started
03:45:14:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1073741515 = 0xc0000135)
03:45:14:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
03:46:13:WU00:FS00:Starting
03:46:13:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_16.fah/FahCore_16.exe -dir 00 -suffix 01 -version 701 -lifeline 6280 -checkpoint 3 -gpu 0 -service
03:46:13:WU00:FS00:Started FahCore on PID 6296
03:46:13:Started thread 14 on PID 6280
03:46:13:WU00:FS00:Core PID:4840
03:46:13:WU00:FS00:FahCore 0x16 started
03:46:13:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1073741515 = 0xc0000135)
03:46:13:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
03:47:50:WU00:FS00:Starting
03:47:50:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_16.fah/FahCore_16.exe -dir 00 -suffix 01 -version 701 -lifeline 6280 -checkpoint 3 -gpu 0 -service
03:47:50:WU00:FS00:Started FahCore on PID 6532
03:47:50:Started thread 15 on PID 6280
03:47:50:WU00:FS00:Core PID:5548
03:47:50:WU00:FS00:FahCore 0x16 started
03:47:50:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1073741515 = 0xc0000135)
03:47:50:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
03:50:27:WU00:FS00:Starting
03:50:27:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_16.fah/FahCore_16.exe -dir 00 -suffix 01 -version 701 -lifeline 6280 -checkpoint 3 -gpu 0 -service
03:50:27:WU00:FS00:Started FahCore on PID 6756
03:50:27:Started thread 16 on PID 6280
03:50:27:WU00:FS00:Core PID:3968
03:50:27:WU00:FS00:FahCore 0x16 started
03:50:28:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1073741515 = 0xc0000135)
03:50:28:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
03:50:28:WARNING:WU00:FS00:Too many errors, failing
03:50:28:WU00:FS00:Sending unit results: id:00 state:SEND error:FAILED project:11293 run:0 clone:315 gen:4 core:0x16 unit:0x0000005f6652edbc4d9255d5546c9b30
03:50:28:WU00:FS00:Connecting to 171.67.108.44:8080
03:50:28:WU00:FS00:Server responded WORK_QUIT (404)
03:50:28:WARNING:WU00:FS00:Server did not like results, dumping
03:50:28:WU00:FS00:Cleaning up
03:50:28:WU02:FS00:Connecting to assign-GPU.stanford.edu:80
03:50:29:WU02:FS00:News: Welcome to Folding@Home
03:50:29:WU02:FS00:Assigned to work server 171.67.108.44
03:50:29:WU02:FS00:Requesting new work unit for slot 00: READY gpu:0:"Juniper XT [AMD Radeon HD 6000 Series]" from 171.67.108.44
03:50:29:WU02:FS00:Connecting to 171.67.108.44:8080
03:50:30:WU02:FS00:Downloading 44.30KiB
03:50:30:WU02:FS00:Download complete
03:50:30:WU02:FS00:Received Unit: id:02 state:DOWNLOAD error:OK project:11293 run:21 clone:339 gen:6 core:0x16 unit:0x0000005c6652edbc4d94b932bd3ed01a
03:50:31:WU02:FS00:Starting
03:50:31:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_16.fah/FahCore_16.exe -dir 02 -suffix 01 -version 701 -lifeline 6280 -checkpoint 3 -gpu 0 -service
03:50:31:WU02:FS00:Started FahCore on PID 4912
03:50:31:Started thread 17 on PID 6280
03:50:31:WU02:FS00:Core PID:6276
03:50:31:WU02:FS00:FahCore 0x16 started
03:50:31:WU02:FS00:FahCore returned: UNKNOWN_ENUM (-1073741515 = 0xc0000135)
03:50:31:WARNING:WU02:FS00:FahCore returned an unknown error code which probably indicates that it crashed
03:50:31:WU02:FS00:Starting
03:50:31:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_16.fah/FahCore_16.exe -dir 02 -suffix 01 -version 701 -lifeline 6280 -checkpoint 3 -gpu 0 -service
03:50:31:WU02:FS00:Started FahCore on PID 3796
03:50:31:Started thread 18 on PID 6280
03:50:31:WU02:FS00:Core PID:3940
03:50:31:WU02:FS00:FahCore 0x16 started
03:50:32:WU02:FS00:FahCore returned: UNKNOWN_ENUM (-1073741515 = 0xc0000135)
03:50:32:WARNING:WU02:FS00:FahCore returned an unknown error code which probably indicates that it crashed
03:51:31:WU02:FS00:Starting
03:51:31:WU02:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/ProgramData/FAHClient/cores/www.stanford.edu/~pande/Win32/AMD64/ATI/R600/Core_16.fah/FahCore_16.exe -dir 02 -suffix 01 -version 701 -lifeline 6280 -checkpoint 3 -gpu 0 -service
03:51:31:WU02:FS00:Started FahCore on PID 1244
03:51:31:Started thread 19 on PID 6280
03:51:32:WU02:FS00:Core PID:5420
03:51:32:WU02:FS00:FahCore 0x16 started
03:51:32:WU02:FS00:FahCore returned: UNKNOWN_ENUM (-1073741515 = 0xc0000135)
03:51:32:WARNING:WU02:FS00:FahCore returned an unknown error code which probably indicates that it crashed
EDIT - Nevermind. I just updated the drivers for the video card and it started working.
imnuts
Posts: 7
Joined: Sat Jan 10, 2009 6:37 pm

Re: Radeon HD 6700 Support

Post by imnuts »

Well, the client started running, but it is not performing any work. After more than an hour, there is no progress for the GPU client, and no further info in the log about the client doing any work either. So, does anyone know how to get the GPU client working properly?
7im
Posts: 10189
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Radeon HD 6700 Support

Post by 7im »

Please post the **** System **** section of the log.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
imnuts
Posts: 7
Joined: Sat Jan 10, 2009 6:37 pm

Re: Radeon HD 6700 Support

Post by imnuts »

7im wrote:Please post the **** System **** section of the log.
Here you go

Code: Select all

*********************** Log Started 2012-04-10T03:43:06Z ***********************
03:43:06:************************* Folding@home Client *************************
03:43:06:      Website: http://folding.stanford.edu/
03:43:06:    Copyright: (c) 2009-2012 Stanford University
03:43:06:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
03:43:06:         Args: 
03:43:06:       Config: C:/ProgramData/FAHClient/config.xml
03:43:06:******************************** Build ********************************
03:43:06:      Version: 7.1.52
03:43:06:         Date: Mar 20 2012
03:43:06:         Time: 19:37:42
03:43:06:      SVN Rev: 3515
03:43:06:       Branch: fah/trunk/client
03:43:06:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
03:43:06:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
03:43:06:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT
03:43:06:     Platform: win32 XP
03:43:06:         Bits: 32
03:43:06:         Mode: Release
03:43:06:******************************* System ********************************
03:43:06:          CPU: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz
03:43:06:       CPU ID: GenuineIntel Family 6 Model 42 Stepping 7
03:43:06:         CPUs: 8
03:43:06:       Memory: 15.98GiB
03:43:06:  Free Memory: 10.26GiB
03:43:06:      Threads: WINDOWS_THREADS
03:43:06:   On Battery: false
03:43:06:   UTC offset: -4
03:43:06:          PID: 6280
03:43:06:          CWD: C:/Windows/system32
03:43:06:           OS: Windows 7 Ultimate
03:43:06:      OS Arch: AMD64
03:43:06:         GPUs: 1
03:43:06:        GPU 0: ATI:4 Juniper XT [AMD Radeon HD 6000 Series]
03:43:06:         CUDA: Not detected
03:43:06:Win32 Service: true
03:43:06:***********************************************************************
7im
Posts: 10189
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Radeon HD 6700 Support

Post by 7im »

Had to verify this... Thanks.
03:43:06: OS: Windows 7 Ultimate

03:43:06: GPUs: 1
03:43:06: GPU 0: ATI:4 Juniper XT [AMD Radeon HD 6000 Series]

Although it shouldn't be required, please add the option for "client-type" and set it to "advanced" and see if that works better.

Also, is the GPU overclocked?
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
imnuts
Posts: 7
Joined: Sat Jan 10, 2009 6:37 pm

Re: Radeon HD 6700 Support

Post by imnuts »

7im wrote:Although it shouldn't be required, please add the option for "client-type" and set it to "advanced" and see if that works better.

Also, is the GPU overclocked?
Added it to the GPU client, stopped and restarted the folding, and it had no effect, still not working. Also, the GPU is running its stock clock speed.
bruce
Posts: 20910
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Radeon HD 6700 Support

Post by bruce »

imnuts wrote:

Code: Select all

03:43:06:         GPUs: 1
03:43:06:        GPU 0: ATI:4 Juniper XT [AMD Radeon HD 6000 Series]
03:43:06:         CUDA: Not detected
03:43:06:Win32 Service: true
03:43:06:***********************************************************************
The GPU cannot be used in a Windows service.

If you start the client interactively does the GPU work?
imnuts
Posts: 7
Joined: Sat Jan 10, 2009 6:37 pm

Re: Radeon HD 6700 Support

Post by imnuts »

bruce wrote:
imnuts wrote:

Code: Select all

03:43:06:         GPUs: 1
03:43:06:        GPU 0: ATI:4 Juniper XT [AMD Radeon HD 6000 Series]
03:43:06:         CUDA: Not detected
03:43:06:Win32 Service: true
03:43:06:***********************************************************************
The GPU cannot be used in a Windows service.

If you start the client interactively does the GPU work?
That fixed it. Is there any specific reason that the GPU client can't be started via the service? Anyway to have the CPU client start as a service, and GPU start via FAHControl?
7im
Posts: 10189
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Radeon HD 6700 Support

Post by 7im »

Yes. GPU via service mode was blocked by Microsoft for security reasons starting with Vista. This is an MS OS issue, not a client issue. The GPU as service still works great in Windows XP.

IIRC, there is no way to start different slots in different modes from one fahclient. And not really worth the hassle of installing and monitoring 2 fahclient instances, as one would be command line only. And while that might work, haven't tried it personally.

Unless the PC sits for long periods with nobody logged in, trying to run the CPU as a service while GPU at startup would only net a very few seconds of additional CPU folding time at each login. How often does happen?
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
bruce
Posts: 20910
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: Radeon HD 6700 Support

Post by bruce »

7im wrote:IIRC, there is no way to start different slots in different modes from one fahclient. And not really worth the hassle of installing and monitoring 2 fahclient instances, as one would be command line only. And while that might work, haven't tried it personally.

Unless the PC sits for long periods with nobody logged in, trying to run the CPU as a service while GPU at startup would only net a very few seconds of additional CPU folding time at each login. How often does happen?
I have done it. As you say, the benefits are small compared to how hard it is to make it work.

Copy the data directory/discard whatever was not there at install-time (queue/slots/etc/UserID (in db????/etc. )/create a shortcut to start it/Coordinate a change of the port number/edit slots/create a service/etc.
Post Reply