GTX 1070

Post requests to add new GPUs to the official whitelist here.

Moderators: Site Moderators, FAHC Science Team

Locked
chris21010
Posts: 13
Joined: Fri Jun 14, 2013 8:33 pm

GTX 1070

Post by chris21010 »

Code: Select all

"C:\Program Files (x86)\FAHClient\FAHClient.exe" --lspci
VendorID:DeviceID:Vendor Name:Description
0x8086:0x1d3e:Intel Corporation:PCI-to-PCI Bridge
0x8086:0x3cc2:Intel Corporation:Power Management Controller
0x1b21:0x1042:ASMedia Technology Inc.:USB xHCI Compliant Host Controller
0x8086:0x3c83:Intel Corporation:QPI Device
0x8086:0x3c04:Intel Corporation:PCI-to-PCI Bridge
0x8086:0x3cc1:Intel Corporation:Power Management Controller
0x8086:0x3ce6:Intel Corporation:Registers
0x8086:0x3cb8:Intel Corporation:CPU to DRAM Controller
0x8086:0x3c2a:Intel Corporation:Chipset Controller
0x8086:0x1d14:Intel Corporation:PCI-to-PCI Bridge
0x8086:0x3cc0:Intel Corporation:Power Management Controller
0x8086:0x3cb7:Intel Corporation:Registers
0x8086:0x1d26:Intel Corporation:Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #1 - 1D26
0x8086:0x1d3a:Intel Corporation:Intel(R) Management Engine Interface
0x8086:0x3ce4:Intel Corporation:Performance Monitor
0x8086:0x3cb6:Intel Corporation:Registers
0x10de:0x100a:NVIDIA Corporation:GK110 [GeForce GTX 780 Ti]
0x8086:0x3c80:Intel Corporation:QPI Device
0x8086:0x3ce3:Intel Corporation:Registers
0x8086:0x3cb5:Intel Corporation:Thermal Control Device
0x8086:0x1d1a:Intel Corporation:PCI-to-PCI Bridge
0x8086:0x3cb4:Intel Corporation:Thermal Control Device
0x8086:0x3cb3:Intel Corporation:Registers
0x8086:0x3c2c:Intel Corporation:Interrupt Controller
0x8086:0x1d16:Intel Corporation:PCI-to-PCI Bridge
0x8086:0x244e:Intel Corporation:PCI-to-PCI Bridge
0x8086:0x3c46:Intel Corporation:Performance Monitor
0x8086:0x3ce0:Intel Corporation:Registers
0x8086:0x3cb2:Intel Corporation:Registers
0x10de:0x0e1a:NVIDIA Corporation:High Definition Audio Controller
0x8086:0x3c28:Intel Corporation:Chipset Controller
0x8086:0x3c45:Intel Corporation:Performance Monitor
0x8086:0x3cb1:Intel Corporation:Thermal Control Device
0x8086:0x3ca8:Intel Corporation:Registers
0x8086:0x3c44:Intel Corporation:Performance Monitor
0x8086:0x3cb0:Intel Corporation:Thermal Control Device
0x8086:0x3c71:Intel Corporation:Registers
0x8086:0x3c43:Intel Corporation:Performance Monitor
0x8086:0x3c00:Intel Corporation:DMI Device
0x8086:0x1d10:Intel Corporation:PCI-to-PCI Bridge
0x8086:0x3c08:Intel Corporation:PCI-to-PCI Bridge
0x8086:0x1d18:Intel Corporation:PCI-to-PCI Bridge
0x8086:0x3c94:Intel Corporation:QPI Device
0x8086:0x1d22:Intel Corporation:SM Bus Controller
0x1103:0x2720:HighPoint Technologies, Inc.:RocketRAID 2720 SAS Controller
0x10de:0x10f0:NVIDIA Corporation:NV3 [PCI]
0x8086:0x3c93:Intel Corporation:QPI Device
0x1b21:0x0612:ASMedia Technology Inc.:Standard SATA AHCI Controller
0x8086:0x3cf6:Intel Corporation:Address Decoder
0x1b21:0x1042:ASMedia Technology Inc.:USB xHCI Compliant Host Controller
0x8086:0x3cd0:Intel Corporation:Power Management Controller
0x8086:0x3cf5:Intel Corporation:Address Decoder
0x1106:0x3403:VIA Technologies, Inc.:VIA 1394 OHCI Compliant Host Controller
0x8086:0x3cae:Intel Corporation:Address Decoder
0x8086:0x1d02:Intel Corporation:Standard SATA AHCI Controller
0x8086:0x1d1e:Intel Corporation:PCI-to-PCI Bridge
0x8086:0x3c02:Intel Corporation:PCI-to-PCI Bridge
0x8086:0x3cf4:Intel Corporation:Address Decoder
0x8086:0x1d41:Intel Corporation:LPC Controller
0x8086:0x3c90:Intel Corporation:QPI Device
0x8086:0x3cad:Intel Corporation:Address Decoder
0x8086:0x1d12:Intel Corporation:PCI-to-PCI Bridge
0x1b21:0x1042:ASMedia Technology Inc.:USB xHCI Compliant Host Controller
0x8086:0x3ca0:Intel Corporation:QPI Device
0x10de:0x1b81:NVIDIA Corporation:NVIDIA GeForce GTX 1070
0x1102:0x0012:Creative Labs:SB Recon3D PCIe Audio Controller
0x8086:0x1503:Intel Corporation:Intel(R) 82579V Gigabit Network Connection
0x8086:0x3cac:Intel Corporation:Address Decoder
0x1b4b:0x9130:Marvell Technology Group Ltd.:Standard SATA AHCI Controller
0x8086:0x3cab:Intel Corporation:Address Decoder
0x8086:0x1d2d:Intel Corporation:Intel(R) C600/X79 series chipset USB2 Enhanced Host Controller #2 - 1D2D
0x8086:0x3ce8:Intel Corporation:Registers
0x8086:0x3ce8:Intel Corporation:Registers
0x8086:0x3ce8:Intel Corporation:Registers
0x8086:0x3ce8:Intel Corporation:Registers
0x8086:0x3ce8:Intel Corporation:Registers
0x8086:0x3ce8:Intel Corporation:Registers
0x8086:0x3caa:Intel Corporation:Address Decoder
0x8086:0x3c84:Intel Corporation:QPI Device

Code: Select all

*********************** Log Started 2016-06-15T22:41:52Z ***********************
22:41:52:************************* Folding@home Client *************************
22:41:52:      Website: http://folding.stanford.edu/
22:41:52:    Copyright: (c) 2009-2014 Stanford University
22:41:52:       Author: Joseph Coffland <joseph@cauldrondevelopment.com>
22:41:52:         Args: --open-web-control
22:41:52:       Config: <none>
22:41:52:******************************** Build ********************************
22:41:52:      Version: 7.4.4
22:41:52:         Date: Mar 4 2014
22:41:52:         Time: 20:26:54
22:41:52:      SVN Rev: 4130
22:41:52:       Branch: fah/trunk/client
22:41:52:     Compiler: Intel(R) C++ MSVC 1500 mode 1200
22:41:52:      Options: /TP /nologo /EHa /Qdiag-disable:4297,4103,1786,279 /Ox -arch:SSE
22:41:52:               /QaxSSE2,SSE3,SSSE3,SSE4.1,SSE4.2 /Qopenmp /Qrestrict /MT /Qmkl
22:41:52:     Platform: win32 XP
22:41:52:         Bits: 32
22:41:52:         Mode: Release
22:41:52:******************************* System ********************************
22:41:52:          CPU: Intel(R) Core(TM) i7-3930K CPU @ 3.20GHz
22:41:52:       CPU ID: GenuineIntel Family 6 Model 45 Stepping 7
22:41:52:         CPUs: 12
22:41:52:       Memory: 31.94GiB
22:41:52:  Free Memory: 27.58GiB
22:41:52:      Threads: WINDOWS_THREADS
22:41:52:   OS Version: 6.2
22:41:52:  Has Battery: false
22:41:52:   On Battery: false
22:41:52:   UTC Offset: -4
22:41:52:          PID: 9644
22:41:52:          CWD: C:/Users/Chris-WALLE/AppData/Roaming/FAHClient
22:41:52:           OS: Windows 10 Home
22:41:52:      OS Arch: AMD64
22:41:52:         GPUs: 2
22:41:52:        GPU 0: NVIDIA:3 GK110 [GeForce GTX 780 Ti]
22:41:52:        GPU 1: UNSUPPORTED: NV3 [PCI]
22:41:52:         CUDA: 6.1
22:41:52:  CUDA Driver: 8000
22:41:52:Win32 Service: false
22:41:52:***********************************************************************
22:41:52:<config>
22:41:52:  <!-- Folding Slots -->
22:41:52:</config>
22:41:52:Trying to access database...
22:41:52:Successfully acquired database lock
22:41:52:Enabled folding slot 00: READY cpu:10
22:41:52:Enabled folding slot 01: READY gpu:0:GK110 [GeForce GTX 780 Ti]
22:41:52:WARNING:WU00:No longer matches Slot 0's configuration, migrating to FS01
22:41:52:WU00:FS01:Starting
22:41:52:WU00:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Chris-WALLE/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 00 -suffix 01 -version 704 -lifeline 9644 -checkpoint 15 -gpu 0 -gpu-vendor nvidia
22:41:52:WU00:FS01:Started FahCore on PID 9488
22:41:52:WU00:FS01:Core PID:6684
22:41:52:WU00:FS01:FahCore 0x21 started
22:41:52:WU01:FS00:Connecting to 171.67.108.45:8080
22:41:53:WU00:FS01:0x21:*********************** Log Started 2016-06-15T22:41:52Z ***********************
22:41:53:WU00:FS01:0x21:Project: 9704 (Run 34, Clone 5, Gen 145)
22:41:53:WU00:FS01:0x21:Unit: 0x000000d6ab404162553ec0eff9d38b1e
22:41:53:WU00:FS01:0x21:CPU: 0x00000000000000000000000000000000
22:41:53:WU00:FS01:0x21:Machine: 0
22:41:53:WU00:FS01:0x21:Digital signatures verified
22:41:53:WU00:FS01:0x21:Folding@home GPU Core21 Folding@home Core
22:41:53:WU00:FS01:0x21:Version 0.0.17
22:41:53:WU01:FS00:Assigned to work server 171.67.108.158
22:41:53:WU01:FS00:Requesting new work unit for slot 00: READY cpu:10 from 171.67.108.158
22:41:53:WU01:FS00:Connecting to 171.67.108.158:8080
22:41:54:WU01:FS00:Downloading 807.88KiB
22:41:55:WU01:FS00:Download complete
22:41:55:WU01:FS00:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:9040 run:537 clone:5 gen:18 core:0xa4 unit:0x00000015ab436c9e56e9d8a3538f061a
22:41:55:WU01:FS00:Starting
22:41:55:WU01:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:/Users/Chris-WALLE/AppData/Roaming/FAHClient/cores/web.stanford.edu/~pande/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 01 -suffix 01 -version 704 -lifeline 9644 -checkpoint 15 -np 10
22:41:55:WU01:FS00:Started FahCore on PID 10048
22:41:55:WU01:FS00:Core PID:9984
22:41:55:WU01:FS00:FahCore 0xa4 started
22:41:55:16:127.0.0.1:New Web connection
22:41:56:WU01:FS00:0xa4:
22:41:56:WU01:FS00:0xa4:*------------------------------*
22:41:56:WU01:FS00:0xa4:Folding@Home Gromacs GB Core
22:41:56:WU01:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
22:41:56:WU01:FS00:0xa4:
22:41:56:WU01:FS00:0xa4:Preparing to commence simulation
22:41:56:WU01:FS00:0xa4:- Looking at optimizations...
22:41:56:WU01:FS00:0xa4:- Created dyn
22:41:56:WU01:FS00:0xa4:- Files status OK
22:41:56:WU01:FS00:0xa4:- Expanded 826756 -> 1402440 (decompressed 169.6 percent)
22:41:56:WU01:FS00:0xa4:Called DecompressByteArray: compressed_data_size=826756 data_size=1402440, decompressed_data_size=1402440 diff=0
22:41:56:WU01:FS00:0xa4:- Digital signature verified
22:41:56:WU01:FS00:0xa4:
22:41:56:WU01:FS00:0xa4:Project: 9040 (Run 537, Clone 5, Gen 18)
22:41:56:WU01:FS00:0xa4:
22:41:56:WU01:FS00:0xa4:Assembly optimizations on if available.
22:41:56:WU01:FS00:0xa4:Entering M.D.
22:42:02:WU01:FS00:0xa4:Mapping NT from 10 to 10 
22:42:02:WU01:FS00:0xa4:Completed 0 out of 250000 steps  (0%)
22:42:20:Saving configuration to config.xml
22:42:20:<config>
22:42:20:  <!-- Network -->
22:42:20:  <proxy v=':8080'/>
22:42:20:
22:42:20:  <!-- Folding Slots -->
22:42:20:  <slot id='0' type='CPU'/>
22:42:20:  <slot id='1' type='GPU'/>
22:42:20:</config>
22:42:30:Removing old file 'configs/config-20160614-053316.xml'
22:42:30:Saving configuration to config.xml
22:42:30:<config>
22:42:30:  <!-- Network -->
22:42:30:  <proxy v=':8080'/>
22:42:30:
22:42:30:  <!-- Folding Slots -->
22:42:30:  <slot id='1' type='GPU'/>
22:42:30:</config>
22:42:30:FS00:Shutting core down
22:42:36:WU01:FS00:FahCore returned: INTERRUPTED (102 = 0x66)
22:42:36:WARNING:WU01:Slot ID 0 no longer exists and there are no other matching slots, dumping
22:42:36:WU01:Sending unit results: id:01 state:SEND error:DUMPED project:9040 run:537 clone:5 gen:18 core:0xa4 unit:0x00000015ab436c9e56e9d8a3538f061a
22:42:36:WU01:Connecting to 171.67.108.158:8080
22:42:36:WU01:Server responded WORK_ACK (400)
22:42:36:WU01:Cleaning up
22:42:48:FS01:Paused
22:42:48:FS01:Shutting core down
22:42:48:WU00:FS01:0x21:WARNING:Console control signal 1 on PID 6684
22:42:48:WU00:FS01:0x21:Exiting, please wait. . .
22:42:53:Removing old file 'configs/config-20160614-131410.xml'
22:42:53:Saving configuration to config.xml
22:42:53:<config>
22:42:53:  <!-- Network -->
22:42:53:  <proxy v=':8080'/>
22:42:53:
22:42:53:  <!-- Folding Slots -->
22:42:53:  <slot id='1' type='GPU'>
22:42:53:    <paused v='true'/>
22:42:53:  </slot>
22:42:53:</config>
22:43:18:WU00:FS01:0x21:Completed 0 out of 640000 steps (0%)
22:43:18:WU00:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
22:43:18:WU00:FS01:0x21:Folding@home Core Shutdown: INTERRUPTED
22:43:19:WU00:FS01:FahCore returned: INTERRUPTED (102 = 0x66)
22:43:54:Removing old file 'configs/config-20160614-131450.xml'
22:43:54:Saving configuration to config.xml
22:43:54:<config>
22:43:54:  <!-- Network -->
22:43:54:  <proxy v=':8080'/>
22:43:54:
22:43:54:  <!-- Slot Control -->
22:43:54:  <power v='full'/>
22:43:54:
22:43:54:  <!-- Folding Slots -->
22:43:54:  <slot id='1' type='GPU'>
22:43:54:    <paused v='true'/>
22:43:54:  </slot>
22:43:54:</config>
saw the 1080 post these so thinking i'll do the same for the 1070. would love to start folding on it ^_^
_r2w_ben
Posts: 285
Joined: Wed Apr 23, 2008 3:11 pm

Re: GTX 1070

Post by _r2w_ben »

Congrats on the new hardware! It should provided a nice boost.

Your --lspci output looks the same as the addition made June 8. Have you deleted GPUs.txt and restarted the client?
chris21010
Posts: 13
Joined: Fri Jun 14, 2013 8:33 pm

Re: GTX 1070

Post by chris21010 »

OK, this is weird... and i think i should put this issue in a different place. i got both working but for some reason the labeled GPU's are backwards. as in my 780ti is doing 560K PPD, which isnt true as its the expected PPD of the 1070 and vice versa.
ChristianVirtual
Posts: 1596
Joined: Tue May 28, 2013 12:14 pm
Location: Tokyo

Re: GTX 1070

Post by ChristianVirtual »

The current client at times mix up GPUs when changing hardware after installation. You could try to play with some index options but easier to just reinstall FAH software stack and let the installer figure out your setup.
ImageImage
Please contribute your logs to http://ppd.fahmm.net
Sn1ken
Posts: 60
Joined: Tue Feb 11, 2014 12:58 pm

Re: GTX 1070

Post by Sn1ken »

UPDATED WALKTHROUGH

1. Make sure to do a clean removal and re-install first to see if this will fix the issue. If not proceed to step 2.

2. Install GPU-Z and make a note of the order of the GPUs in the drop down list at the bottom, 0 for the first GPU, 1 for the second and so on; this can be 'List A'

GPU-Z, for "List A". GTX 570 will be 0, and the 260 will be 1

Image
3. Use command prompt (Start button, 'cmd' in the search bar and press enter) to run C:\Program Files (x86)\FAHClient\fachclient.exe --lspci and note the order the GPUs come up on this list; 'List B'


C:\Program Files (x86)\FAHClient\fachclient.exe --lspci
[spoiler]Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.

C:\Users\Family>cd\

C:\>cd program files (x86)

C:\Program Files (x86)>cd fahclient

C:\Program Files (x86)\FAHClient>fahclient.exe --lspci
VendorID:DeviceID:Vendor Name:Description
0x104c:0x8023:Texas Instruments:Texas Instruments 1394 OHCI Compliant Host Contr
oller
0x1095:0x3114:Silicon Image, Inc.:Silicon Image SiI 3114 SoftRaid 5 Controller
0x10de:0x0360:NVIDIA Corporation:PCI standard ISA bridge
0x10de:0x0368:NVIDIA Corporation:NVIDIA nForce PCI System Management
0x10de:0x0369:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x036c:NVIDIA Corporation:Standard OpenHCD USB Host Controller
0x10de:0x036d:NVIDIA Corporation:Standard Enhanced PCI to USB Host Controller
0x10de:0x036e:NVIDIA Corporation:Standard Dual Channel PCI IDE Controller
0x10de:0x0370:NVIDIA Corporation:PCI standard PCI-to-PCI bridge
0x10de:0x0371:NVIDIA Corporation:High Definition Audio Controller
0x10de:0x0373:NVIDIA Corporation:NVIDIA nForce Networking Controller
0x10de:0x0373:NVIDIA Corporation:NVIDIA nForce Networking Controller
0x10de:0x0376:NVIDIA Corporation:PCI Express standard Root Port
0x10de:0x037f:NVIDIA Corporation:NVIDIA nForce Serial ATA Controller
0x10de:0x037f:NVIDIA Corporation:NVIDIA nForce Serial ATA Controller
0x10de:0x037f:NVIDIA Corporation:NVIDIA nForce Serial ATA Controller
0x10de:0x03a1:NVIDIA Corporation:PCI standard host CPU bridge
0x10de:0x03a8:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03a9:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03aa:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03ab:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03ac:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03ad:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03ae:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03af:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03b0:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03b1:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03b2:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03b3:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03b4:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03b5:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03b6:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03b7:NVIDIA Corporation:PCI Express standard Root Port
0x10de:0x03ba:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x03bc:NVIDIA Corporation:PCI standard RAM Controller
0x10de:0x05b1:NVIDIA Corporation:PCI Express standard Downstream Switch Port
0x10de:0x05b1:NVIDIA Corporation:PCI Express standard Downstream Switch Port
0x10de:0x05b1:NVIDIA Corporation:PCI Express standard Downstream Switch Port
0x10de:0x05e2:NVIDIA Corporation:GT200 [GeForce GTX 260]
0x10de:0x0e09:NVIDIA Corporation:High Definition Audio Controller
0x10de:0x1081:NVIDIA Corporation:GF110 [GeForce GTX 570]

C:\Program Files (x86)\FAHClient>[/spoiler]
0x10de:0x05e2:NVIDIA Corporation:GT200 [GeForce GTX 260]
0x10de:0x0e09:NVIDIA Corporation:High Definition Audio Controller
0x10de:0x1081:NVIDIA Corporation:GF110 [GeForce GTX 570]

This is what you're looking for, and this will be "List B". In this case, the 260 will be 0 and the 570 will be 1

4. Open F@H Client and clear all the automatically assigned slots for the GPUs

5. Create new GPU slots and set the each GPU index according to "list B', and the core indices according to 'list A'. Do this for all GPUs present
Ex. gpu-index = 0, CUDA-index = 1, OpenCL-index = 1 will fold on GTX 260

Image
6. For any GPU you DO NOT want to fold, under 'Extra Slot Options' add Name: paused Value: true

7. Save your configuration then quit and restart your client to verify that config has been saved properly.

After you set up the GPU configs correctly, the config file should look something like this

[spoiler]23:37:52:<config>
23:37:52: <!-- Network -->
23:37:52: <proxy v=':8080'/>
23:37:52:
23:37:52: <!-- Slot Control -->
23:37:52: <power v='full'/>
23:37:52:
23:37:52: <!-- User Information -->
23:37:52: <passkey v='********************************'/>
23:37:52: <team v='37726'/>
23:37:52: <user v='DownshiftArtist'/>
23:37:52:
23:37:52: <!-- Folding Slots -->
23:37:52: <slot id='0' type='GPU'>
23:37:52: <cuda-index v='1'/>
23:37:52: <gpu-index v='0'/>
23:37:52: <opencl-index v='1'/>
23:37:52: <paused v='true'/>
23:37:52: </slot>
23:37:52: <slot id='2' type='GPU'>
23:37:52: <client-type v='beta'/>
23:37:52: <cuda-index v='0'/>
23:37:52: <gpu-index v='1'/>
23:37:52: <opencl-index v='0'/>
23:37:52: </slot>
23:37:52:</config>[/spoiler]

edit: NOTE: Your slot id may be different as it is based on whatever number your client assigns to it.


8. FOLD!!
Image
road-runner
Posts: 227
Joined: Sun Dec 02, 2007 4:01 am
Location: Willis, Texas

Re: GTX 1070

Post by road-runner »

What PPD are the 1070 doing anyone got one folding yet?
Image
toTOW
Site Moderator
Posts: 6296
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: GTX 1070

Post by toTOW »

Since the discussion is moving off topic, please move Pascal talks to the existing topic here : viewtopic.php?f=38&t=28784
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Locked