Page 1 of 1

Add Radeon Pro WX 4100 to list

PostPosted: Wed Dec 13, 2017 6:47 pm
by MikeF
Hello.
I would like to have AMD Radeon Pro WX4100 added to the whitelist. I have searched around for instructions, but cannot find any. I have figured out that you need information from GPU-z which I am including. I believe I am in the correct place. Any help is appreciated.
Image

Re: Add Radeon Pro WX 4100 to list

PostPosted: Thu Dec 14, 2017 11:28 pm
by bruce
You came to the right place.

There seem to be a lot of products based on the Polaris 11 chip, though I'm not familiar with all of the details. I have assumed that your device ID is 1002 67E3. I'm not sure what the 1002 0B0D ID refers to.

Maybe if you run FAHClient --lspci or another source of lspci information on you're system we can figure it out.

Re: Add Radeon Pro WX 4100 to list

PostPosted: Fri Dec 15, 2017 3:05 am
by MikeF
Hi Bruce.
Thank you for the response. I know hardware fairly well, but am pretty much a noobie regarding software. I am pretty good at following directions, though. What is "lspci" and how do I gather its information? Is that command line internal to FAH or through Windows? In my directory for F@H, FAHClient is a folder. Subdirectories are: About folding@Home; Data Directory; FAHControl; FAHViewer; Folding@home; and Web Control.

Re: Add Radeon Pro WX 4100 to list

PostPosted: Sat Dec 16, 2017 6:13 am
by bruce
The lspci function originated in Linux but has been ported to Windows as well as a browser scripting language. It's function is similar to part of GPU-Z... namely to list the devices attached to the PCI bus. It's output looks a lot like the data in GPUs.txt except that it describes YOUR hardware. Yes, it's built into FAHClient, but you can also search the web for an app that does the same thing.

It will list lots of devices, not just your GPUs, so you have to search through the output and find the applicable lines.

Re: Add Radeon Pro WX 4100 to list

PostPosted: Sat Dec 16, 2017 4:45 pm
by MikeF
Is this what you are needing?

VendorID:DeviceID:Vendor Name:Description
0x8086:0xa149:Intel Corporation:Intel(R) 100 Series/C230 Series Chipset Family LPC Controller (C236) - A149
0x8086:0x15b7:Intel Corporation:Intel(R) Ethernet Connection (2) I219-LM
0x144d:0xa802:Samsung Electronics Co Ltd:Samsung NVMe Controller
0x8086:0xa121:Intel Corporation:Intel(R) 100 Series/C230 Series Chipset Family PMC - A121
0x8086:0xa167:Intel Corporation:Intel(R) 100 Series/C230 Series Chipset Family PCI Root Port #17 - A167
0x144d:0xa802:Samsung Electronics Co Ltd:Samsung NVMe Controller
0x8086:0xa12f:Intel Corporation:USB xHCI Compliant Host Controller
0x8086:0xa123:Intel Corporation:Intel(R) 100 Series/C230 Series Chipset Family SMBus - A123
0x8086:0x1918:Intel Corporation:PCI standard host CPU bridge
0x1002:0xaae0:Advanced Micro Devices, Inc. [AMD/ATI]:High Definition Audio Bus
0x8086:0xa131:Intel Corporation:Intel(R) 100 Series/C230 Series Chipset Family Thermal subsystem - A131
0x8086:0xa170:Intel Corporation:High Definition Audio Controller
0x8086:0x1901:Intel Corporation:Intel(R) Xeon(R) E3 - 1200/1500 v5/6th Gen Intel(R) Core(TM) PCIe Controller (x16) - 1901
0x1002:0x67e3:Advanced Micro Devices, Inc. [AMD/ATI]:Radeon Pro WX 4100
0x8086:0xa13a:Intel Corporation:Intel(R) Management Engine Interface
0x8086:0xa118:Intel Corporation:Intel(R) 100 Series/C230 Series Chipset Family PCI Express Root Port #9 - A118
0x8086:0xa102:Intel Corporation:Intel(R) 100 Series/C230 Chipset Family SATA AHCI Controller

Re: Add Radeon Pro WX 4100 to list

PostPosted: Sat Dec 16, 2017 6:36 pm
by bruce
MikeF wrote:Is this what you are needing?

0x1002:0xaae0:Advanced Micro Devices, Inc. [AMD/ATI]:High Definition Audio Bus
0x1002:0x67e3:Advanced Micro Devices, Inc. [AMD/ATI]:Radeon Pro WX 4100


Precisely.

0x1002:0x67e3 was added a couple of days ago but you may need to refresh your cache and convince FAH to download a fresh copy of GPUs.txt.