Folding Forum

Posted: **Fri Mar 27, 2020 4:12 am**

Code: Select all: VendorID:DeviceID:PCI Bus:PCI Slot:PCI function:Vendor Name:Description 0x8086:0x4003:0:0:0:Intel Corporation: 0x8086:0x4021:0:1:0:Intel Corporation: 0x8086:0x4025:0:5:0:Intel Corporation: 0x8086:0x4029:0:9:0:Intel Corporation: 0x8086:0x4030:0:16:0:Intel Corporation: 0x8086:0x4030:0:16:1:Intel Corporation: 0x8086:0x4030:0:16:2:Intel Corporation: 0x8086:0x4030:0:16:3:Intel Corporation: 0x8086:0x4030:0:16:4:Intel Corporation: 0x8086:0x4031:0:17:0:Intel Corporation: 0x8086:0x4035:0:21:0:Intel Corporation: 0x8086:0x4035:0:21:1:Intel Corporation: 0x8086:0x4036:0:22:0:Intel Corporation: 0x8086:0x4036:0:22:1:Intel Corporation: 0x8086:0x269a:0:27:0:Intel Corporation: 0x8086:0x2690:0:28:0:Intel Corporation: 0x8086:0x2688:0:29:0:Intel Corporation: 0x8086:0x2689:0:29:1:Intel Corporation: 0x8086:0x268a:0:29:2:Intel Corporation: 0x8086:0x268b:0:29:3:Intel Corporation: 0x8086:0x268c:0:29:7:Intel Corporation: 0x8086:0x244e:0:30:0:Intel Corporation: 0x8086:0x2670:0:31:0:Intel Corporation: 0x8086:0x269e:0:31:1:Intel Corporation: 0x8086:0x2681:0:31:2:Intel Corporation: 0x8086:0x269b:0:31:3:Intel Corporation: 0x10de:0x040f:2:0:0:NVIDIA Corporation: 0x8086:0x3500:3:0:0:Intel Corporation: 0x8086:0x350c:3:0:3:Intel Corporation: 0x8086:0x3510:4:0:0:Intel Corporation: 0x8086:0x3514:4:1:0:Intel Corporation: 0x1000:0x0058:5:0:0:LSI Logic / Symbios Logic: 0x14e4:0x167a:8:0:0:Broadcom Corporation: 0x104c:0x8023:9:10:0:Texas Instruments:

Code: Select all: *********************** Log Started 2020-03-27T02:38:30Z *********************** 02:38:30:************************* Folding@home Client ************************* 02:38:30: Website: https://foldingathome.org/ 02:38:30: Copyright: (c) 2009-2018 foldingathome.org 02:38:30: Author: Joseph Coffland <joseph@cauldrondevelopment.com> 02:38:30: Args: --child --lifeline 1094 /etc/fahclient/config.xml --run-as 02:38:30: fahclient --pid-file=/var/run/fahclient.pid --daemon 02:38:30: Config: /etc/fahclient/config.xml 02:38:30:******************************** Build ******************************** 02:38:30: Version: 7.5.1 02:38:30: Date: May 12 2018 02:38:30: Time: 22:51:07 02:38:30: Repository: Git 02:38:30: Revision: 4705bf53c635f88b8fe85af7675557e15d491ff0 02:38:30: Branch: master 02:38:30: Compiler: GNU 4.4.7 20120313 (Red Hat 4.4.7-18) 02:38:30: Options: -std=gnu++98 -O3 -funroll-loops 02:38:30: Platform: linux2 4.14.0-3-amd64 02:38:30: Bits: 64 02:38:30: Mode: Release 02:38:30:******************************* System ******************************** 02:38:30: CPU: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz 02:38:30: CPU ID: GenuineIntel Family 6 Model 23 Stepping 6 02:38:30: CPUs: 8 02:38:30: Memory: 31.36GiB 02:38:30: Free Memory: 30.67GiB 02:38:30: Threads: POSIX_THREADS 02:38:30: OS Version: 5.5 02:38:30: Has Battery: false 02:38:30: On Battery: false 02:38:30: UTC Offset: -5 02:38:30: PID: 1096 02:38:30: CWD: /var/lib/fahclient 02:38:30: OS: Linux 5.5.10-200.fc31.x86_64 x86_64 02:38:30: OS Arch: AMD64 02:38:30: GPUs: 1 02:38:30: GPU 0: Bus:2 Slot:0 Func:0 NVIDIA:0 G84 [Quadro FX 1700] 02:38:30: CUDA Device 0: Platform:0 Device:0 Bus:2 Slot:0 Compute:1.1 Driver:6.5 02:38:30:OpenCL Device 0: Platform:0 Device:0 Bus:2 Slot:0 Compute:1.0 Driver:340.108 02:38:30:*********************************************************************** 02:38:30:<config> 02:38:30:  02:38:30: <passkey v='********************************'/> 02:38:30: <team v='31885'/> 02:38:30: <user v='James.Edington@█████'/> 02:38:30: 02:38:30:  02:38:30: <slot id='0' type='CPU'/> 02:38:30: <slot id='1' type='GPU'/> 02:38:30:</config> 02:38:30:Switching to user fahclient 02:38:30:Trying to access database... 02:38:31:Successfully acquired database lock 02:38:31:Enabled folding slot 00: READY cpu:6 02:38:31:Enabled folding slot 01: READY gpu:0:G84 [Quadro FX 1700] 02:38:31:WU01:FS00:Starting 02:38:31:WU01:FS00:Running FahCore: /usr/bin/FAHCoreWrapper /var/lib/fahclient/cores/cores.foldingathome.org/v7/lin/64bit/Core_a7.fah/FahCore_a7 -dir 01 -suffix 01 -version 705 -lifeline 1096 -checkpoint 15 -np 6 02:38:31:WU01:FS00:Started FahCore on PID 1113 02:38:31:WU01:FS00:Core PID:1117 02:38:31:WU01:FS00:FahCore 0xa7 started 02:38:31:WU01:FS00:0xa7:*********************** Log Started 2020-03-27T02:38:31Z *********************** 02:38:31:WU01:FS00:0xa7:************************** Gromacs Folding@home Core *************************** 02:38:31:WU01:FS00:0xa7: Type: 0xa7 02:38:31:WU01:FS00:0xa7: Core: Gromacs 02:38:31:WU01:FS00:0xa7: Args: -dir 01 -suffix 01 -version 705 -lifeline 1113 -checkpoint 15 -np 6 02:38:31:WU01:FS00:0xa7:************************************ CBang ************************************* 02:38:31:WU01:FS00:0xa7: Date: Nov 5 2019 02:38:31:WU01:FS00:0xa7: Time: 05:57:01 02:38:31:WU01:FS00:0xa7: Revision: 46c96f1aa8419571d83f3e63f9c99a0d602f6da9 02:38:31:WU01:FS00:0xa7: Branch: master 02:38:31:WU01:FS00:0xa7: Compiler: GNU 8.3.0 02:38:31:WU01:FS00:0xa7: Options: -std=c++11 -O3 -funroll-loops -fno-pie -fPIC 02:38:31:WU01:FS00:0xa7: Platform: linux2 4.19.0-5-amd64 02:38:31:WU01:FS00:0xa7: Bits: 64 02:38:31:WU01:FS00:0xa7: Mode: Release 02:38:31:WU01:FS00:0xa7:************************************ System ************************************ 02:38:31:WU01:FS00:0xa7: CPU: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz 02:38:31:WU01:FS00:0xa7: CPU ID: GenuineIntel Family 6 Model 23 Stepping 6 02:38:31:WU01:FS00:0xa7: CPUs: 8 02:38:31:WU01:FS00:0xa7: Memory: 31.36GiB 02:38:31:WU01:FS00:0xa7:Free Memory: 30.63GiB 02:38:31:WU01:FS00:0xa7: Threads: POSIX_THREADS 02:38:31:WU01:FS00:0xa7: OS Version: 5.5 02:38:31:WU01:FS00:0xa7:Has Battery: false 02:38:31:WU01:FS00:0xa7: On Battery: false 02:38:31:WU01:FS00:0xa7: UTC Offset: -5 02:38:31:WU01:FS00:0xa7: PID: 1117 02:38:31:WU01:FS00:0xa7: CWD: /var/lib/fahclient/work 02:38:31:WU01:FS00:0xa7:******************************** Build - libFAH ******************************** 02:38:31:WU01:FS00:0xa7: Version: 0.0.18 02:38:31:WU01:FS00:0xa7: Author: Joseph Coffland <joseph@cauldrondevelopment.com> 02:38:31:WU01:FS00:0xa7: Copyright: 2019 foldingathome.org 02:38:31:WU01:FS00:0xa7: Homepage: https://foldingathome.org/ 02:38:31:WU01:FS00:0xa7: Date: Nov 5 2019 02:38:31:WU01:FS00:0xa7: Time: 06:13:26 02:38:31:WU01:FS00:0xa7: Revision: 490c9aa2957b725af319379424d5c5cb36efb656 02:38:31:WU01:FS00:0xa7: Branch: master 02:38:31:WU01:FS00:0xa7: Compiler: GNU 8.3.0 02:38:31:WU01:FS00:0xa7: Options: -std=c++11 -O3 -funroll-loops -fno-pie 02:38:31:WU01:FS00:0xa7: Platform: linux2 4.19.0-5-amd64 02:38:31:WU01:FS00:0xa7: Bits: 64 02:38:31:WU01:FS00:0xa7: Mode: Release 02:38:31:WU01:FS00:0xa7:************************************ Build ************************************* 02:38:31:WU01:FS00:0xa7: SIMD: sse2 02:38:31:WU01:FS00:0xa7:******************************************************************************** 02:38:31:WU01:FS00:0xa7:Project: 13850 (Run 0, Clone 37467, Gen 2) 02:38:31:WU01:FS00:0xa7:Unit: 0x00000004287234c95e788a97a6c3879a 02:38:31:WU01:FS00:0xa7:Digital signatures verified 02:38:31:WU01:FS00:0xa7:Calling: mdrun -s frame2.tpr -o frame2.trr -x frame2.xtc -e frame2.edr -cpi state.cpt -cpt 15 -nt 6 02:38:32:WU01:FS00:0xa7:Steps: first=1000000 total=500000 02:38:33:WU00:FS01:Connecting to 65.254.110.245:8080 02:38:34:WU00:FS01:Assigned to work server 192.0.2.1 02:38:34:WU00:FS01:Requesting new work unit for slot 01: READY gpu:0:G84 [Quadro FX 1700] from 192.0.2.1 02:38:34:WU00:FS01:Connecting to 192.0.2.1:8080 02:38:35:WU01:FS00:0xa7:Completed 379042 out of 500000 steps (75%) 02:39:35:WU01:FS00:0xa7:Completed 380000 out of 500000 steps (76%) 02:40:44:WARNING:WU00:FS01:WorkServer connection failed on port 8080 trying 80 02:40:44:WU00:FS01:Connecting to 192.0.2.1:80 02:40:51:ERROR:WU00:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection refused 02:40:52:WU00:FS01:Connecting to 65.254.110.245:8080 02:40:52:WU00:FS01:Assigned to work server 192.0.2.1 02:40:52:WU00:FS01:Requesting new work unit for slot 01: READY gpu:0:G84 [Quadro FX 1700] from 192.0.2.1 02:40:52:WU00:FS01:Connecting to 192.0.2.1:8080 02:40:52:WARNING:WU00:FS01:WorkServer connection failed on port 8080 trying 80 02:40:52:WU00:FS01:Connecting to 192.0.2.1:80 02:40:52:ERROR:WU00:FS01:Exception: Failed to connect to 192.0.2.1:80: Connection refused 02:41:52:WU00:FS01:Connecting to 65.254.110.245:8080 02:41:52:WU00:FS01:Assigned to work server 192.0.2.1 02:41:52:WU00:FS01:Requesting new work unit for slot 01: READY gpu:0:G84 [Quadro FX 1700] from 192.0.2.1 02:41:52:WU00:FS01:Connecting to 192.0.2.1:8080 02:42:20:ERROR:WU00:FS01:Exception: Server did not assign work unit 02:43:05:WU01:FS00:0xa7:Completed 385000 out of 500000 steps (77%) 02:43:29:WU00:FS01:Connecting to 65.254.110.245:8080 02:43:29:WU00:FS01:Assigned to work server 192.0.2.1 02:43:29:WU00:FS01:Requesting new work unit for slot 01: READY gpu:0:G84 [Quadro FX 1700] from 192.0.2.1 02:43:29:WU00:FS01:Connecting to 192.0.2.1:8080 02:43:45:ERROR:WU00:FS01:Exception: 10002: Received short response, expected 512 bytes, got 0 02:46:06:WU00:FS01:Connecting to 65.254.110.245:8080 02:46:07:WU00:FS01:Assigned to work server 192.0.2.1 02:46:07:WU00:FS01:Requesting new work unit for slot 01: READY gpu:0:G84 [Quadro FX 1700] from 192.0.2.1 02:46:07:WU00:FS01:Connecting to 192.0.2.1:8080 02:46:36:WU01:FS00:0xa7:Completed 390000 out of 500000 steps (78%) 02:50:06:WU01:FS00:0xa7:Completed 395000 out of 500000 steps (79%) 02:53:36:WU01:FS00:0xa7:Completed 400000 out of 500000 steps (80%) 02:57:04:WU01:FS00:0xa7:Completed 405000 out of 500000 steps (81%) 03:00:30:WU01:FS00:0xa7:Completed 410000 out of 500000 steps (82%) 03:03:59:WU01:FS00:0xa7:Completed 415000 out of 500000 steps (83%) 03:07:28:WU01:FS00:0xa7:Completed 420000 out of 500000 steps (84%)

Posted: **Fri Mar 27, 2020 6:37 am**

The Quadro FX 1700 is too old to be used for folding, it is based on Tesla. Its G84 GPU chip is basically the same as used on the GeForce 8600 GT. The card is marked as unsupported in the GPUs.txt file. If you modified the entry to get the card to configure in the client, that is not enough.

Posted: **Fri Mar 27, 2020 6:53 am**

Joe_H wrote:The Quadro FX 1700 is too old to be used for folding

alas.

It seemed to support a reasonable featureset / “Device Extensions” below; does it just have too low a clockspeed for the turnaround?

Code: Select all: 02:00.0 VGA compatible controller [0300]: NVIDIA Corporation G84GL [Quadro FX 1700] [10de:040f] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device [10de:049a] Flags: bus master, fast devsel, latency 0, IRQ 35 Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=512M] Memory at f8000000 (64-bit, non-prefetchable) [size=32M] I/O ports at dc80 [size=128] Expansion ROM at 000c0000 [virtual] [disabled] [size=128K] Capabilities: [60] Power Management version 2 Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nvidia Kernel modules: nouveau, nvidia

Code: Select all: Number of platforms 2 Platform Name NVIDIA CUDA Platform Vendor NVIDIA Corporation Platform Version OpenCL 1.1 CUDA 6.5.51 Platform Profile FULL_PROFILE Platform Extensions cl_khr_byte_addressable_store cl_khr_icd cl_khr_gl_sharing cl_nv_compiler_options cl_nv_device_attribute_query cl_nv_pragma_unroll cl_nv_copy_opts Platform Extensions function suffix NV Platform Name Portable Computing Language Platform Vendor The pocl project Platform Version OpenCL 1.2 pocl 1.5-pre, RelWithDebInfo, LLVM 9.0.0, RELOC, SLEEF, DISTRO, POCL_DEBUG Platform Profile FULL_PROFILE Platform Extensions cl_khr_icd Platform Extensions function suffix POCL Platform Name NVIDIA CUDA Number of devices 1 Device Name Quadro FX 1700 Device Vendor NVIDIA Corporation Device Vendor ID 0x10de Device Version OpenCL 1.0 CUDA Driver Version 340.108 Device OpenCL C Version OpenCL C 1.0 Device Type GPU Device Topology (NV) PCI-E, 02:00.0 Device Profile FULL_PROFILE Device Available Yes Compiler Available Yes Max compute units 4 Max clock frequency 920MHz Compute Capability (NV) 1.1 Max work item dimensions 3 Max work item sizes 512x512x64 Max work group size 512 Preferred work group size multiple 32 Warp size (NV) 32 Preferred / native vector sizes char 1 / 1 short 1 / 1 int 1 / 1 long 1 / 1 half 0 / 0 (n/a) float 1 / 1 double 0 / 0 (n/a) Half-precision Floating-point support (n/a) Single-precision Floating-point support (core) Denormals No Infinity and NANs Yes Round to nearest Yes Round to zero Yes Round to infinity Yes IEEE754-2008 fused multiply-add Yes Support is emulated in software No Correctly-rounded divide and sqrt operations No Double-precision Floating-point support (n/a) Address bits 32, Little-Endian Global memory size 536150016 (511.3MiB) Error Correction support No Max memory allocation 134217728 (128MiB) Unified memory for Host and Device No Integrated memory (NV) No Minimum alignment for any data type 128 bytes Alignment of base address 2048 bits (256 bytes) Global Memory cache type None Image support Yes Max number of samplers per kernel 16 Max 2D image size 4096x16383 pixels Max 3D image size 2048x2048x2048 pixels Max number of read image args 128 Max number of write image args 8 Local memory type Local Local memory size 16384 (16KiB) Registers per block (NV) 8192 Max number of constant args 9 Max constant buffer size 65536 (64KiB) Max size of kernel argument 4352 (4.25KiB) Queue properties Out-of-order execution Yes Profiling Yes Profiling timer resolution 1000ns Execution capabilities Run OpenCL kernels Yes Run native kernels No Kernel execution timeout (NV) No Concurrent copy and kernel execution (NV) Yes Number of async copy engines 1 Device Extensions cl_khr_byte_addressable_store cl_khr_icd cl_khr_gl_sharing cl_nv_compiler_options cl_nv_device_attribute_query cl_nv_pragma_unroll cl_nv_copy_opts cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics Platform Name Portable Computing Language Number of devices 1 Device Name pthread-Intel(R) Xeon(R) CPU E5410 @ 2.33GHz Device Vendor GenuineIntel Device Vendor ID 0x6c636f70 Device Version OpenCL 1.2 pocl HSTR: pthread-x86_64-unknown-linux-gnu-penryn Driver Version 1.5-pre Device OpenCL C Version OpenCL C 1.2 pocl Device Type CPU Device Profile FULL_PROFILE Device Available Yes Compiler Available Yes Linker Available Yes Max compute units 8 Max clock frequency 2333MHz Device Partition (core) Max number of sub-devices 8 Supported partition types equally, by counts Supported affinity domains (n/a) Max work item dimensions 3 Max work item sizes 4096x4096x4096 Max work group size 4096 Preferred work group size multiple 8 Preferred / native vector sizes char 16 / 16 short 8 / 8 int 4 / 4 long 2 / 2 half 0 / 0 (n/a) float 4 / 4 double 2 / 2 (cl_khr_fp64) Half-precision Floating-point support (n/a) Single-precision Floating-point support (core) Denormals Yes Infinity and NANs Yes Round to nearest Yes Round to zero Yes Round to infinity Yes IEEE754-2008 fused multiply-add No Support is emulated in software No Correctly-rounded divide and sqrt operations Yes Double-precision Floating-point support (cl_khr_fp64) Denormals Yes Infinity and NANs Yes Round to nearest Yes Round to zero Yes Round to infinity Yes IEEE754-2008 fused multiply-add Yes Support is emulated in software No Address bits 64, Little-Endian Global memory size 31520968704 (29.36GiB) Error Correction support No Max memory allocation 8589934592 (8GiB) Unified memory for Host and Device Yes Minimum alignment for any data type 128 bytes Alignment of base address 1024 bits (128 bytes) Global Memory cache type Read/Write Global Memory cache size 6291456 (6MiB) Global Memory cache line size 64 bytes Image support Yes Max number of samplers per kernel 16 Max size for 1D images from buffer 536870912 pixels Max 1D or 2D image array size 2048 images Max 2D image size 16384x16384 pixels Max 3D image size 2048x2048x2048 pixels Max number of read image args 128 Max number of write image args 128 Local memory type Global Local memory size 4194304 (4MiB) Max number of constant args 8 Max constant buffer size 4194304 (4MiB) Max size of kernel argument 1024 Queue properties Out-of-order execution Yes Profiling Yes Prefer user sync for interop Yes Profiling timer resolution 1ns Execution capabilities Run OpenCL kernels Yes Run native kernels Yes printf() buffer size 16777216 (16MiB) Built-in kernels (n/a) Device Extensions cl_khr_byte_addressable_store cl_khr_global_int32_base_atomics cl_khr_global_int32_extended_atomics cl_khr_local_int32_base_atomics cl_khr_local_int32_extended_atomics cl_khr_3d_image_writes cl_khr_fp64 cl_khr_int64_base_atomics cl_khr_int64_extended_atomics cl_khr_fp64 NULL platform behavior clGetPlatformInfo(NULL, CL_PLATFORM_NAME, ...) NVIDIA CUDA clGetDeviceIDs(NULL, CL_DEVICE_TYPE_ALL, ...) Success [NV] clCreateContext(NULL, ...) [default] Success [NV] clCreateContext(NULL, ...) [other] Success [POCL] clCreateContextFromType(NULL, CL_DEVICE_TYPE_DEFAULT) No platform clCreateContextFromType(NULL, CL_DEVICE_TYPE_CPU) No devices found in platform clCreateContextFromType(NULL, CL_DEVICE_TYPE_GPU) No platform clCreateContextFromType(NULL, CL_DEVICE_TYPE_ACCELERATOR) No devices found in platform clCreateContextFromType(NULL, CL_DEVICE_TYPE_CUSTOM) Invalid device type for platform clCreateContextFromType(NULL, CL_DEVICE_TYPE_ALL) No platform ICD loader properties ICD loader Name OpenCL ICD Loader ICD loader Vendor OCL Icd free software ICD loader Version 2.2.12 ICD loader Profile OpenCL 2.2

Posted: **Fri Mar 27, 2020 7:01 am**

When a GPU supports only OpenCL 1.1, it generally indicates that it is unable to run code that contains DoublePrecision Floating Point calculations. With OpenCL 1.2 support, you'd be able to do the calculations needed by FAH.

Posted: **Fri Mar 27, 2020 7:06 am**

The card does not support OpenCL 1.2 or greater, and it does not support Double Precision arithmetic. Those are the current minimum for GPU folding, and even when DP was not required it could not be used. The minimum GPU architecture from nVidia is Fermi based, Kepler or later is preferable.

Posted: **Fri Mar 27, 2020 9:21 am**

https://www.techpowerup.com/gpu-specs/q ... 1700.c1345

Yep, no OpenCL 1.2, no Double Precision floating point math, and about 10 times too slow too meet deadlines if it did meet the requirements.

Posted: **Sat Apr 04, 2020 8:33 pm**

So Quadro FX3700 the same? :e(

Posted: **Sat Apr 04, 2020 10:03 pm**

SlodkiOtus wrote:So Quadro FX3700 the same?

Yes, the same holds as that is an old Tesla based GPU. Tesla has not been supported for years, it last could be used with Core_15 which last was used for projects at least 5 years ago.

Folding Forum

[rejected] Quadro FX 1700

[rejected] Quadro FX 1700

Re: Quadro FX 1700 [0x10de:0x040f:2:0:G84]

Re: Quadro FX 1700 [0x10de:0x040f:2:0:G84]

Re: Quadro FX 1700 [0x10de:0x040f:2:0:G84]

Re: Quadro FX 1700 [0x10de:0x040f:2:0:G84]

Re: Quadro FX 1700 [0x10de:0x040f:2:0:G84]

Re: [rejected] Quadro FX 1700

Re: [rejected] Quadro FX 1700