PPD Loss For Primary GPU

FAH provides a V7 client installer for Debian / Mint / Ubuntu / RedHat / CentOS / Fedora. Installation on other distros may or may not be easy but if you can offer help to others, they would appreciate it.

Moderators: Site Moderators, FAHC Science Team

Post Reply
ChristianVirtual
Posts: 1596
Joined: Tue May 28, 2013 12:14 pm
Location: Tokyo

PPD Loss For Primary GPU

Post by ChristianVirtual »

Thanks for the work Jesse; very helpful.

My knowledge with the xorg,conf is a bit limited and wonder if you can help me to optimize my setup.
Currently I have three GPU: 2xGTX 780 and one GTX 660Ti

One of the 780 is the primary screen where all GUI interaction take place; slot close to CPU.
The 660Ti is most distant to the CPU. This way is the only physical chance to setup the cards on the motherboard (Asus P8Z77 Pro). The 780s are too long for the outside slot (some jumper and connector in the way).

Based on PPD is seems that the primary card gets a hit of 4000 to 10000 PPD which I would like to harvest too. In addition the temps are 8 degrees higher compared to the non-UI 780.

How can I configure .nvidia-settings.rc and/or xorg.conf to make the 660TI the primary GPU dealing with UI and get both 780 fully focused on folding. I tried several things but right now I can't even start nvidia-settings in GUI mode anymore (core dumps). The 660TI is also connected via DVI to the same monitor as the primary card (monitor support two inputs); but I get only white screen on that.

Here my current xorg.conf (I tried to play with the screen layout, thats why it seems wired with screen 0 and "screen2")

Code: Select all

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen2" 1920 0
    Screen      1  "Screen1" LeftOf "Screen2"
    Screen      2  "Screen0" RightOf "Screen2"
    InputDevice    "Keyboard0" "CoreKeyboard"
    InputDevice    "Mouse0" "CorePointer"
    Option         "Xinerama" "0"
EndSection

Section "Files"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/psaux"
    Option         "Emulate3Buttons" "no"
    Option         "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"

    # generated from default
    Identifier     "Keyboard0"
    Driver         "kbd"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Unknown"
    ModelName      "Eizo SX2461W"
    HorizSync       31.0 - 76.0
    VertRefresh     59.0 - 61.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor2"
    VendorName     "Unknown"
    ModelName      "Eizo SX2461W"
    HorizSync       31.0 - 76.0
    VertRefresh     59.0 - 61.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "Monitor1"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 780"
    BusID          "PCI:1:0:0"
EndSection

Section "Device"
    Identifier     "Device1"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 780"
    BusID          "PCI:2:0:0"
EndSection

Section "Device"
    Identifier     "Device2"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 660 Ti"
    BusID          "PCI:3:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor        "Monitor0"
    DefaultDepth    24
    Option         "Coolbits" "5" 
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen1"
    Device         "Device1"
    Monitor        "Monitor1"
    DefaultDepth    24
    Option         "Coolbits" "5" 
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

Section "Screen"
    Identifier     "Screen2"
    Device         "Device2"
    Monitor        "Monitor2"
    DefaultDepth    24
    Option         "Coolbits" "5" 
    Option         "Stereo" "0"
    Option         "metamodes" "nvidia-auto-select +0+0"
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

and my SMI print (660TI right now not folding; thats why so cool)

Code: Select all

Mon Oct 21 23:17:01 2013       
+------------------------------------------------------+                       
| NVIDIA-SMI 5.319.49   Driver Version: 319.49         |                       
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 780     Off  | 0000:01:00.0     N/A |                  N/A |
| 70%   70C  N/A     N/A /  N/A |      132MB /  3071MB |     N/A      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 780     Off  | 0000:02:00.0     N/A |                  N/A |
| 70%   62C  N/A     N/A /  N/A |      280MB /  3071MB |     N/A      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 660 Ti  Off  | 0000:03:00.0     N/A |                  N/A |
| 30%   28C  N/A     N/A /  N/A |        8MB /  2047MB |     N/A      Default |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Compute processes:                                               GPU Memory |
|  GPU       PID  Process name                                     Usage      |
|=============================================================================|
|    0            Not Supported                                               |
|    1            Not Supported                                               |
|    2            Not Supported                                               |
+-----------------------------------------------------------------------------+
Thanks in advance to get me more PPD :roll:
ImageImage
Please contribute your logs to http://ppd.fahmm.net
Jesse_V
Site Moderator
Posts: 2851
Joined: Mon Jul 18, 2011 4:44 am
Hardware configuration: OS: Windows 10, Kubuntu 19.04
CPU: i7-6700k
GPU: GTX 970, GTX 1080 TI
RAM: 24 GB DDR4
Location: Western Washington

Re: Guide for fan speed control for Nvidia cards in Linux

Post by Jesse_V »

I'm far from an expert in xorg.conf, nor am I a big fan of messing with it.
Image
(http://xkcd.com/963/)

I wouldn't follow this guide until your setup is working properly. The card used for the UI should be the one that the monitor is plugged into. Can you restore the xorg.conf to the way it was before, in order to get your nvidia-settings to work? Once Nvidia Settings can fire up properly, you should be able to use its GUI to change things around, and then save your settings to xorg.conf.
F@h is now the top computing platform on the planet and nothing unites people like a dedicated fight against a common enemy. This virus affects all of us. Lets end it together.
Post Reply