Threadripper experience?

Moderators: Site Moderators, FAHC Science Team

Threadripper experience?

Postby deeppow » Tue Oct 10, 2017 9:14 pm

Just got my new machine up and running, Threadripper 1920X on an Asus X399-A. Folding keeps crashing. I've uninstalled, cleaned up and reinstalled. Yes the latest version fah-installer_7.4.4_x86.

Anyone have experience with this? Suggestions?
deeppow
 
Posts: 13
Joined: Thu Oct 28, 2010 1:56 pm
Location: Los Alamos, NM

Re: Threadripper experience?

Postby JimboPalmer » Tue Oct 10, 2017 11:38 pm

Since you do not give us any logs, no one can really help. I do have two suggestions. One is to set up two CPU slots with 16 CPUs each, just in case 32 is too many. The other is to use the newer 7.4.16 https://folding.stanford.edu/beta/

(two bugs I know of, it has a memory leak so only run advance control when needed, not constantly. And oddly the default scheme is defective, I use windows basic)
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
JimboPalmer
 
Posts: 2041
Joined: Mon Feb 16, 2009 5:12 am
Location: Greenwood MS USA

Re: Threadripper experience?

Postby deeppow » Wed Oct 11, 2017 3:15 am

The beta has been installed but doesn't solve my issue.

A google search shows where the logs are for Linux but info related to Windows is difficult to find. While I've searched, a little help would be appreciated. Where are the logs stored in Windows 10?
deeppow
 
Posts: 13
Joined: Thu Oct 28, 2010 1:56 pm
Location: Los Alamos, NM

Re: Threadripper experience?

Postby JimboPalmer » Wed Oct 11, 2017 3:40 am

JimboPalmer
 
Posts: 2041
Joined: Mon Feb 16, 2009 5:12 am
Location: Greenwood MS USA

Re: Threadripper experience?

Postby bruce » Wed Oct 11, 2017 4:13 am

See below:
bruce
 
Posts: 20009
Joined: Thu Nov 29, 2007 11:13 pm
Location: So. Cal.

Re: Threadripper experience? ---- unaligned stack

Postby deeppow » Wed Oct 11, 2017 7:40 pm

Thank you Bruce. Hopefully this is enough info.

The Windows event log for the application failure shows:

Faulting application name: FahCore_a7.exe, version: 0.0.0.0, time stamp: 0x57e1e600
Faulting module name: ntdll.dll, version: 10.0.15063.608, time stamp: 0x8274fd8b
Exception code: 0xc0000028
Fault offset: 0x0000000000004b90
Faulting process id: 0x4834
Faulting application start time: 0x01d342a962ca70b6
Faulting application path: C:\ProgramData\FAHClient\cores\fahwebx.stanford.ed u\cores\Win32\AMD64\AVX\Core_a7.fah\FahCore_a7.exe
Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
Report Id: d137c9d5-7742-498c-84fe-e1d5a2042064
Faulting package full name:
Faulting package-relative application ID:


0xC0000028 STATUS_BAD_STACK = An invalid or unaligned stack was encountered during an unwind operation.

Appears to be a Windows 2000 Executive STATUS error message. Application broken or user error (I have no idea what that might be).

Log below
deeppow
 
Posts: 13
Joined: Thu Oct 28, 2010 1:56 pm
Location: Los Alamos, NM

Re: Threadripper experience?

Postby deeppow » Wed Oct 11, 2017 7:50 pm

Code: Select all
*********************** Log Started 2017-10-11T18:44:06Z ***********************
18:44:06:************************* Folding@home Client *************************
18:44:06:        Website: http://folding.stanford.edu/
18:44:06:      Copyright: (c) 2009-2016 Stanford University
18:44:06:         Author: Joseph Coffland <joseph@cauldrondevelopment.com>
18:44:06:           Args: --open-web-control
18:44:06:         Config: <none>
18:44:06:******************************** Build ********************************
18:44:06:        Version: 7.4.16
18:44:06:           Date: Jan 6 2017
18:44:06:           Time: 00:25:14
18:44:06:     Repository: Git
18:44:06:       Revision: a9e9e27dc2ee6ff01398c439677bc27f6cb74032
18:44:06:         Branch: master
18:44:06:       Compiler: Visual C++ 2008
18:44:06:        Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox -arch:SSE /MT
18:44:06:       Platform: win32 10
18:44:06:           Bits: 32
18:44:06:           Mode: Release
18:44:06:******************************* System ********************************
18:44:06:            CPU: AMD Ryzen Threadripper 1920X 12-Core Processor
18:44:06:         CPU ID: AuthenticAMD Family 23 Model 1 Stepping 1
18:44:06:           CPUs: 24
18:44:06:         Memory: 11.88GiB
18:44:06:    Free Memory: 6.92GiB
18:44:06:        Threads: WINDOWS_THREADS
18:44:06:     OS Version: 6.2
18:44:06:    Has Battery: false
18:44:06:     On Battery: false
18:44:06:     UTC Offset: -6
18:44:06:            PID: 9140
18:44:06:            CWD: C:\ProgramData\FAHClient
18:44:06:             OS: Windows 10 Pro
18:44:06:        OS Arch: AMD64
18:44:06:           GPUs: 0
18:44:06:  CUDA Device 0: Platform:0 Device:0 Bus:65 Slot:0 Compute:5.2 Driver:9.0
18:44:06:  CUDA Device 1: Platform:0 Device:1 Bus:9 Slot:0 Compute:5.2 Driver:9.0
18:44:06:OpenCL Device 0: Platform:0 Device:0 Bus:65 Slot:0 Compute:1.2 Driver:385.69
18:44:06:OpenCL Device 1: Platform:0 Device:1 Bus:9 Slot:0 Compute:1.2 Driver:385.69
18:44:06:  Win32 Service: false
18:44:06:***********************************************************************
18:44:06:<config>
18:44:06:  <!-- Folding Slots -->
18:44:06:</config>
18:44:06:Connecting to assign-GPU.stanford.edu:80
18:44:06:Updated GPUs.txt
18:44:06:Read GPUs.txt
18:44:06:Trying to access database...
18:44:06:Successfully acquired database lock
18:44:06:Enabled folding slot 00: PAUSED cpu:21 (not configured)
18:44:06:Enabled folding slot 01: PAUSED gpu:0:GM206 [GeForce GTX 960] 2308 (not configured)
18:44:06:Enabled folding slot 02: PAUSED gpu:1:GM204 [GeForce GTX 980] 4612 (not configured)
18:44:11:14:127.0.0.1:New Web connection
18:44:47:Set client configured
18:44:48:WU00:FS00:Connecting to 171.67.108.45:8080
18:44:48:WU01:FS01:Connecting to 171.67.108.45:8080
18:44:48:WU00:FS00:Connecting to 171.67.108.45:8080
18:44:48:WU02:FS02:Connecting to 171.67.108.45:80
18:44:48:WU01:FS01:Connecting to 171.67.108.45:80
18:44:48:WU00:FS00:Assigned to work server 155.247.166.219
18:44:48:WU00:FS00:Requesting new work unit for slot 00: READY cpu:21 from 155.247.166.219
18:44:48:WU00:FS00:Connecting to 155.247.166.219:8080
18:44:49:WU01:FS01:Assigned to work server 140.163.4.233
18:44:49:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM206 [GeForce GTX 960] 2308 from 140.163.4.233
18:44:49:WU01:FS01:Connecting to 140.163.4.233:8080
18:44:49:WU02:FS02:Assigned to work server 171.67.108.157
18:44:49:WU02:FS02:Requesting new work unit for slot 02: READY gpu:1:GM204 [GeForce GTX 980] 4612 from 171.67.108.157
18:44:49:WU02:FS02:Connecting to 171.67.108.157:8080
18:44:49:WU00:FS00:Downloading 339.08KiB
18:44:49:ERROR:WU01:FS01:Exception: Server did not assign work unit
18:44:49:WU01:FS01:Connecting to 171.67.108.45:80
18:44:49:WU02:FS02:Downloading 8.88MiB
18:44:49:WU00:FS00:Download complete
18:44:50:WU01:FS01:Assigned to work server 171.67.108.157
18:44:50:WU01:FS01:Requesting new work unit for slot 01: READY gpu:0:GM206 [GeForce GTX 960] 2308 from 171.67.108.157
18:44:50:WU01:FS01:Connecting to 171.67.108.157:8080
18:44:50:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:13721 run:55 clone:13 gen:75 core:0xa7 unit:0x0000005b0002894b58fd919a90243bbc
18:44:50:WU00:FS00:Downloading core from http://fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah
18:44:50:WU00:FS00:Connecting to fahwebx.stanford.edu:80
18:44:50:WU00:FS00:FahCore a7: Downloading 7.35MiB
18:44:50:WU01:FS01:Downloading 5.12MiB
18:44:55:WU02:FS02:Download 61.23%
18:44:55:WU01:FS01:Download complete
18:44:55:WU01:FS01:Received Unit: id:01 state:DOWNLOAD error:NO_ERROR project:9415 run:2415 clone:0 gen:234 core:0x21 unit:0x00000110ab436c9d585e06dfdc1daf6c
18:44:55:WU01:FS01:Downloading core from http://fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah
18:44:55:WU01:FS01:Connecting to fahwebx.stanford.edu:80
18:44:56:WU00:FS00:FahCore a7: 65.50%
18:44:56:WU01:FS01:FahCore 21: Downloading 3.47MiB
18:44:58:WU00:FS00:FahCore a7: Download complete
18:44:58:WU02:FS02:Download complete
18:44:58:WU00:FS00:Valid core signature
18:44:59:WU00:FS00:Unpacked 13.14MiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe
18:44:59:WU00:FS00:Unpacked 72.16KiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/libbz2-1.dll
18:44:59:WU00:FS00:Unpacked 2.17MiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/libeay32.dll
18:44:59:WU00:FS00:Unpacked 154.79KiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/libexpat-1.dll
18:44:59:WU00:FS00:Unpacked 2.11MiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/libfftw3f-3.dll
18:44:59:WU00:FS00:Unpacked 406.90KiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/ssleay32.dll
18:44:59:WU00:FS00:Unpacked 88.13KiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/zlib1.dll
18:44:59:WU00:FS00:Unpacked 81.28KiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/libgcc_s_seh-1.dll
18:44:59:WU00:FS00:Unpacked 55.64KiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/libwinpthread-1.dll
18:44:59:WU00:FS00:Unpacked 1.35MiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/libstdc++-6.dll
18:44:59:WU00:FS00:Starting
18:44:59:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\ProgramData\FAHClient\cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe -dir 00 -suffix 01 -version 704 -lifeline 9140 -checkpoint 15 -np 21
18:44:59:WU01:FS01:FahCore 21: Download complete
18:44:59:WU00:FS00:Started FahCore on PID 7608
18:44:59:WU00:FS00:Core PID:20148
18:44:59:WU00:FS00:FahCore 0xa7 started
18:44:59:WU02:FS02:Received Unit: id:02 state:DOWNLOAD error:NO_ERROR project:9431 run:645 clone:1 gen:136 core:0x21 unit:0x0000009fab436c9d586fdd38c0f052cc
18:44:59:WU00:FS00:0xa7:*********************** Log Started 2017-10-11T18:44:59Z ***********************
18:44:59:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
18:45:00:WU00:FS00:0xa7:       Type: 0xa7
18:45:00:WU00:FS00:0xa7:       Core: Gromacs
18:45:00:WU00:FS00:0xa7:    Website: http://folding.stanford.edu/
18:45:00:WU00:FS00:0xa7:  Copyright: (c) 2009-2016 Stanford University
18:45:00:WU00:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
18:45:00:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 704 -lifeline 7608 -checkpoint 15 -np
18:45:00:WU01:FS01:Valid core signature
18:45:00:WU00:FS00:0xa7:             21
18:45:00:WU00:FS00:0xa7:     Config: <none>
18:45:00:WU00:FS00:0xa7:************************************ Build *************************************
18:45:00:WU00:FS00:0xa7:    Version: 0.0.11
18:45:00:WU00:FS00:0xa7:       Date: Sep 21 2016
18:45:00:WU00:FS00:0xa7:       Time: 01:43:48
18:45:00:WU00:FS00:0xa7: Repository: Git
18:45:00:WU00:FS00:0xa7:   Revision: 957bd90e68d95ddcf1594dc15ff6c64cc4555146
18:45:00:WU00:FS00:0xa7:     Branch: master
18:45:00:WU00:FS00:0xa7:   Compiler: GNU 4.2.1 Compatible Clang 3.9.0 (trunk 274080)
18:45:00:WU00:FS00:0xa7:    Options: -std=gnu++98 -O3 -funroll-loops -ffast-math -mfpmath=sse
18:45:00:WU00:FS00:0xa7:             -fno-unsafe-math-optimizations -msse2 -I/mingw64/include
18:45:00:WU00:FS00:0xa7:             -Wno-inconsistent-dllimport -Wno-parentheses-equality
18:45:00:WU00:FS00:0xa7:             -Wno-deprecated-register -Wno-unused-local-typedef
18:45:00:WU00:FS00:0xa7:   Platform: linux2 4.6.0-1-amd64
18:45:00:WU00:FS00:0xa7:       Bits: 64
18:45:00:WU00:FS00:0xa7:       Mode: Release
18:45:00:WU00:FS00:0xa7:       SIMD: avx_256
18:45:00:WU00:FS00:0xa7:************************************ System ************************************
18:45:00:WU00:FS00:0xa7:        CPU: AMD Ryzen Threadripper 1920X 12-Core Processor
18:45:00:WU00:FS00:0xa7:     CPU ID: AuthenticAMD Family 23 Model 1 Stepping 1
18:45:00:WU00:FS00:0xa7:       CPUs: 24
18:45:00:WU00:FS00:0xa7:     Memory: 11.88GiB
18:45:00:WU00:FS00:0xa7:Free Memory: 6.90GiB
18:45:00:WU00:FS00:0xa7:    Threads: WINDOWS_THREADS
18:45:00:WU01:FS01:Unpacked 11.80MiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe
18:45:00:WU00:FS00:0xa7: OS Version: 6.2
18:45:00:WU00:FS00:0xa7:Has Battery: false
18:45:00:WU00:FS00:0xa7: On Battery: false
18:45:00:WU00:FS00:0xa7: UTC Offset: -6
18:45:00:WU00:FS00:0xa7:        PID: 20148
18:45:00:WU00:FS00:0xa7:        CWD: C:\ProgramData\FAHClient\work
18:45:00:WU00:FS00:0xa7:         OS: Windows 10 Pro
18:45:00:WU01:FS01:Starting
18:45:00:WU00:FS00:0xa7:    OS Arch: AMD64
18:45:00:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\ProgramData\FAHClient\cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 704 -lifeline 9140 -checkpoint 15 -gpu-vendor nvidia -opencl-platform 0 -opencl-device 1 -cuda-device 1 -gpu 1
18:45:00:WU00:FS00:0xa7:********************************************************************************
18:45:00:WU00:FS00:0xa7:Project: 13721 (Run 55, Clone 13, Gen 75)
18:45:00:WU00:FS00:0xa7:Unit: 0x0000005b0002894b58fd919a90243bbc
18:45:00:WU00:FS00:0xa7:Reading tar file core.xml
18:45:00:WU00:FS00:0xa7:Reading tar file frame75.tpr
18:45:00:WU00:FS00:0xa7:Digital signatures verified
18:45:00:WU00:FS00:0xa7:Calling: mdrun -s frame75.tpr -o frame75.trr -cpt 15 -nt 21
18:45:00:WU00:FS00:0xa7:ERROR:
18:45:00:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:00:WU00:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
18:45:00:WU00:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/programs/mdrun/runner.c, line: 879
18:45:00:WU00:FS00:0xa7:ERROR:
18:45:00:WU00:FS00:0xa7:ERROR:Fatal error:
18:45:00:WU00:FS00:0xa7:ERROR:More than 1 OpenMP thread requested, but Gromacs was compiled without OpenMP support
18:45:00:WU00:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
18:45:00:WU00:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
18:45:00:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:00:WU01:FS01:Started FahCore on PID 18244
18:45:00:WU01:FS01:Core PID:12620
18:45:00:WU01:FS01:FahCore 0x21 started
18:45:00:WU02:FS02:Starting
18:45:00:WU02:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\ProgramData\FAHClient\cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 02 -suffix 01 -version 704 -lifeline 9140 -checkpoint 15 -gpu-vendor nvidia -opencl-platform 0 -opencl-device 0 -cuda-device 0 -gpu 0
18:45:00:WU02:FS02:Started FahCore on PID 9268
18:45:00:WU02:FS02:Core PID:13152
18:45:00:WU02:FS02:FahCore 0x21 started
18:45:00:WU01:FS01:0x21:*********************** Log Started 2017-10-11T18:45:00Z ***********************
18:45:00:WU01:FS01:0x21:Project: 9415 (Run 2415, Clone 0, Gen 234)
18:45:00:WU01:FS01:0x21:Unit: 0x00000110ab436c9d585e06dfdc1daf6c
18:45:00:WU01:FS01:0x21:CPU: 0x00000000000000000000000000000000
18:45:00:WU01:FS01:0x21:Machine: 1
18:45:00:WU01:FS01:0x21:Reading tar file core.xml
18:45:00:WU01:FS01:0x21:Reading tar file integrator.xml
18:45:00:WU01:FS01:0x21:Reading tar file state.xml
18:45:00:WU01:FS01:0x21:Reading tar file system.xml
18:45:00:WU01:FS01:0x21:Digital signatures verified
18:45:00:WU01:FS01:0x21:Folding@home GPU Core21 Folding@home Core
18:45:00:WU01:FS01:0x21:Version 0.0.18
18:45:00:WU02:FS02:0x21:*********************** Log Started 2017-10-11T18:45:00Z ***********************
18:45:00:WU02:FS02:0x21:Project: 9431 (Run 645, Clone 1, Gen 136)
18:45:00:WU02:FS02:0x21:Unit: 0x0000009fab436c9d586fdd38c0f052cc
18:45:00:WU02:FS02:0x21:CPU: 0x00000000000000000000000000000000
18:45:00:WU02:FS02:0x21:Machine: 2
18:45:00:WU02:FS02:0x21:Reading tar file core.xml
18:45:00:WU02:FS02:0x21:Reading tar file integrator.xml
18:45:00:WU02:FS02:0x21:Reading tar file state.xml
18:45:00:WU02:FS02:0x21:Reading tar file system.xml
18:45:00:WU02:FS02:0x21:Digital signatures verified
18:45:00:WU02:FS02:0x21:Folding@home GPU Core21 Folding@home Core
18:45:00:WU02:FS02:0x21:Version 0.0.18
18:45:04:WU01:FS01:0x21:Completed 0 out of 6250000 steps (0%)
18:45:04:WU01:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
18:45:04:WU00:FS00:0xa7:ERROR:
18:45:04:WU00:FS00:0xa7:ERROR:
18:45:04:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:04:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:04:WU00:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
18:45:04:WU00:FS00:0xa7:ERROR:
18:45:04:WU00:FS00:0xa7:WARNING:Unexpected exit() call
18:45:04:WU00:FS00:0xa7:ERROR:
18:45:04:WU00:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
18:45:04:WU00:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
18:45:05:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:05:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:05:WU00:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
18:45:05:WU00:FS00:0xa7:ERROR:
18:45:05:WU00:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
18:45:05:WU00:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
18:45:05:WU00:FS00:0xa7:ERROR:
18:45:05:WU00:FS00:0xa7:ERROR:Fatal error:
18:45:05:WU00:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
18:45:05:WU00:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
18:45:05:WU00:FS00:0xa7:ERROR:Fatal error:
18:45:05:WU00:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (8) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
18:45:05:WU00:FS00:0xa7:ERROR:
18:45:05:WU00:FS00:0xa7:ERROR:
18:45:05:WU00:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (8) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
18:45:05:WU00:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
18:45:05:WU00:FS00:0xa7:ERROR:Fatal error:
18:45:05:WU00:FS00:0xa7:ERROR:Fatal error:
18:45:05:WU00:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
18:45:05:WU00:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
18:45:05:WU00:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (8) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
18:45:05:WU00:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (8) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
18:45:05:WU00:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
18:45:05:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:05:WU00:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
18:45:05:WU00:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
18:45:05:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:05:WU00:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
18:45:05:WU00:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
18:45:05:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:05:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:05:WU02:FS02:0x21:Completed 0 out of 6250000 steps (0%)
18:45:05:WU02:FS02:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
18:45:07:Saving configuration to config.xml
18:45:07:<config>
18:45:07:  <!-- Folding Slot Configuration -->
18:45:07:  <cause v='PARKINSONS'/>
18:45:07:
18:45:07:  <!-- User Information -->
18:45:07:  <passkey v='********************************'/>
18:45:07:  <team v='32'/>
18:45:07:  <user v='deeppow'/>
18:45:07:
18:45:07:  <!-- Folding Slots -->
18:45:07:  <slot id='0' type='CPU'/>
18:45:07:  <slot id='1' type='GPU'/>
18:45:07:  <slot id='2' type='GPU'/>
18:45:07:</config>
18:45:12:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
18:45:12:WARNING:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1073741784 = 0xc0000028)
18:45:13:WU00:FS00:Starting
18:45:13:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\ProgramData\FAHClient\cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe -dir 00 -suffix 01 -version 704 -lifeline 9140 -checkpoint 15 -np 21
18:45:13:WU00:FS00:Started FahCore on PID 4332
18:45:13:WU00:FS00:Core PID:10844
18:45:13:WU00:FS00:FahCore 0xa7 started
18:45:13:WU00:FS00:0xa7:*********************** Log Started 2017-10-11T18:45:13Z ***********************
18:45:13:WU00:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
18:45:13:WU00:FS00:0xa7:       Type: 0xa7
18:45:13:WU00:FS00:0xa7:       Core: Gromacs
18:45:13:WU00:FS00:0xa7:    Website: http://folding.stanford.edu/
18:45:13:WU00:FS00:0xa7:  Copyright: (c) 2009-2016 Stanford University
18:45:13:WU00:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
18:45:13:WU00:FS00:0xa7:       Args: -dir 00 -suffix 01 -version 704 -lifeline 4332 -checkpoint 15 -np
18:45:13:WU00:FS00:0xa7:             21
18:45:13:WU00:FS00:0xa7:     Config: <none>
18:45:13:WU00:FS00:0xa7:************************************ Build *************************************
18:45:13:WU00:FS00:0xa7:    Version: 0.0.11
18:45:13:WU00:FS00:0xa7:       Date: Sep 21 2016
18:45:13:WU00:FS00:0xa7:       Time: 01:43:48
18:45:13:WU00:FS00:0xa7: Repository: Git
18:45:13:WU00:FS00:0xa7:   Revision: 957bd90e68d95ddcf1594dc15ff6c64cc4555146
18:45:13:WU00:FS00:0xa7:     Branch: master
18:45:13:WU00:FS00:0xa7:   Compiler: GNU 4.2.1 Compatible Clang 3.9.0 (trunk 274080)
18:45:13:WU00:FS00:0xa7:    Options: -std=gnu++98 -O3 -funroll-loops -ffast-math -mfpmath=sse
18:45:13:WU00:FS00:0xa7:             -fno-unsafe-math-optimizations -msse2 -I/mingw64/include
18:45:13:WU00:FS00:0xa7:             -Wno-inconsistent-dllimport -Wno-parentheses-equality
18:45:13:WU00:FS00:0xa7:             -Wno-deprecated-register -Wno-unused-local-typedef
18:45:13:WU00:FS00:0xa7:   Platform: linux2 4.6.0-1-amd64
18:45:13:WU00:FS00:0xa7:       Bits: 64
18:45:13:WU00:FS00:0xa7:       Mode: Release
18:45:13:WU00:FS00:0xa7:       SIMD: avx_256
18:45:13:WU00:FS00:0xa7:************************************ System ************************************
18:45:13:WU00:FS00:0xa7:        CPU: AMD Ryzen Threadripper 1920X 12-Core Processor
18:45:13:WU00:FS00:0xa7:     CPU ID: AuthenticAMD Family 23 Model 1 Stepping 1
18:45:13:WU00:FS00:0xa7:       CPUs: 24
18:45:13:WU00:FS00:0xa7:     Memory: 11.88GiB
18:45:13:WU00:FS00:0xa7:Free Memory: 6.59GiB
18:45:13:WU00:FS00:0xa7:    Threads: WINDOWS_THREADS
18:45:13:WU00:FS00:0xa7: OS Version: 6.2
18:45:13:WU00:FS00:0xa7:Has Battery: false
18:45:13:WU00:FS00:0xa7: On Battery: false
18:45:13:WU00:FS00:0xa7: UTC Offset: -6
18:45:13:WU00:FS00:0xa7:        PID: 10844
18:45:13:WU00:FS00:0xa7:        CWD: C:\ProgramData\FAHClient\work
18:45:13:WU00:FS00:0xa7:         OS: Windows 10 Pro
18:45:13:WU00:FS00:0xa7:    OS Arch: AMD64
18:45:13:WU00:FS00:0xa7:********************************************************************************
18:45:13:WU00:FS00:0xa7:Project: 13721 (Run 55, Clone 13, Gen 75)
18:45:13:WU00:FS00:0xa7:Unit: 0x0000005b0002894b58fd919a90243bbc
18:45:13:WU00:FS00:0xa7:Reading tar file core.xml
18:45:13:WU00:FS00:0xa7:Reading tar file frame75.tpr
18:45:13:WU00:FS00:0xa7:Digital signatures verified
18:45:13:WU00:FS00:0xa7:Calling: mdrun -s frame75.tpr -o frame75.trr -cpt 15 -nt 21
18:45:13:WU00:FS00:0xa7:ERROR:
18:45:13:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:13:WU00:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
18:45:13:WU00:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/programs/mdrun/runner.c, line: 879
18:45:13:WU00:FS00:0xa7:ERROR:
18:45:13:WU00:FS00:0xa7:ERROR:Fatal error:
18:45:13:WU00:FS00:0xa7:ERROR:More than 1 OpenMP thread requested, but Gromacs was compiled without OpenMP support
18:45:13:WU00:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
18:45:14:WU00:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
18:45:14:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:18:WU00:FS00:0xa7:ERROR:
18:45:18:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:18:WU00:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
18:45:18:WU00:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
18:45:18:WU00:FS00:0xa7:ERROR:
18:45:18:WU00:FS00:0xa7:ERROR:Fatal error:
18:45:18:WU00:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (8) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
18:45:19:WU00:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
18:45:19:WU00:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
18:45:19:WU00:FS00:0xa7:ERROR:
18:45:19:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:19:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:19:WU00:FS00:0xa7:ERROR:
18:45:19:WU00:FS00:0xa7:WARNING:Unexpected exit() call
18:45:19:WU00:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
18:45:19:WU00:FS00:0xa7:ERROR:
18:45:19:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:19:WU00:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
18:45:19:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:19:WU00:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
18:45:19:WU00:FS00:0xa7:ERROR:
18:45:19:WU00:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
18:45:19:WU00:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
18:45:19:WU00:FS00:0xa7:ERROR:Fatal error:
18:45:19:WU00:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
18:45:19:WU00:FS00:0xa7:ERROR:
18:45:19:WU00:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (8) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
18:45:19:WU00:FS00:0xa7:ERROR:
18:45:19:WU00:FS00:0xa7:ERROR:Fatal error:
18:45:19:WU00:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
18:45:19:WU00:FS00:0xa7:ERROR:Fatal error:
18:45:19:WU00:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (8) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
18:45:19:WU00:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
18:45:19:WU00:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (8) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
18:45:19:WU00:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
18:45:19:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:19:WU00:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
18:45:19:WU00:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
18:45:19:WU00:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
18:45:19:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:19:WU00:FS00:0xa7:ERROR:-------------------------------------------------------
18:45:26:WARNING:WU00:FS00:FahCore returned an unknown error code which probably indicates that it crashed
18:45:26:WARNING:WU00:FS00:FahCore returned: UNKNOWN_ENUM (-1073741784 = 0xc0000028)
deeppow
 
Posts: 13
Joined: Thu Oct 28, 2010 1:56 pm
Location: Los Alamos, NM

Re: Threadripper experience?

Postby Nathan_P » Wed Oct 11, 2017 8:18 pm

Image
Nathan_P
 
Posts: 1175
Joined: Wed Apr 01, 2009 10:22 pm
Location: Jersey, Channel islands

Re: Threadripper experience?

Postby JimboPalmer » Wed Oct 11, 2017 8:45 pm

https://msdn.microsoft.com/en-us/library/xh7e1zba.aspx
You may wish to see if you have an environment variable OMP_NUM_THREADS set. Nathan_P's link has details.

18:44:59:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\ProgramData\FAHClient\cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe -dir 00 -suffix 01 -version 704 -lifeline 9140 -checkpoint 15 -np 21
As i understand this command, you are attempting to use 21 threads, and this is bad, as it is a multiple of a large prime. Setting CPUs to 20 should help a lot, and 18 or 16 is ideal.

[Detail] you have 24 threads in your version of thread ripper. 24 is a great number as it is not a multiple of any large primes (7,11,13,17,19, etc. and sometimes 5)
However you have multiple GPUs so the program lowers the treads by 1 per GPU giving you 21. 21 is not a good choice, 21 = 3 X 7 Better choices are 20 = 2 X 2 X 5, 18 = 2 X 3 X 3, or 16 = 2 X 2 X 2 X 2.

If you have to lower it to 18, you could make a new CPU slot for 3 CPUs, it won't make many points, but some.[/Detail]
Last edited by JimboPalmer on Wed Oct 11, 2017 8:55 pm, edited 1 time in total.
JimboPalmer
 
Posts: 2041
Joined: Mon Feb 16, 2009 5:12 am
Location: Greenwood MS USA

Re: Threadripper experience?

Postby bruce » Wed Oct 11, 2017 8:53 pm

Did you manually set the CPU:21 value?

Was the failing WU downloaded with CPU:21 or with a larger number?
V7.4.4 wouldn't prevent that download but it should be excluded by V7.4.16. (Once it's downloaded, that's a different issue.)
bruce
 
Posts: 20009
Joined: Thu Nov 29, 2007 11:13 pm
Location: So. Cal.

Re: Threadripper experience?

Postby deeppow » Wed Oct 11, 2017 10:10 pm

Jimbo, Did reset OMP_NUM_THREADS to 24.

Bruce & Jimbo, Crashes with same problem.

Here is the config.xml code below. New log file in next post.

Code: Select all
<?xml version="1.0"?>

-<config>
    <!-- Folding Slot Configuration -->
 <cause v="PARKINSONS"/>
    <!-- User Information -->
 <passkey v='********************************'/>
 <team v="32"/>
 <user v="deeppow"/>
 <cpu v="20"/>
    <!-- Folding Slots -->
 <slot type="CPU" id="0"/>
 <slot type="GPU" id="1"/>
 <slot type="GPU" id="2"/>
</config>
deeppow
 
Posts: 13
Joined: Thu Oct 28, 2010 1:56 pm
Location: Los Alamos, NM

Re: Threadripper experience?

Postby deeppow » Wed Oct 11, 2017 10:18 pm

Code: Select all
*********************** Log Started 2017-10-11T20:55:20Z ***********************
20:55:20:************************* Folding@home Client *************************
20:55:20:        Website: http://folding.stanford.edu/
20:55:20:      Copyright: (c) 2009-2016 Stanford University
20:55:20:         Author: Joseph Coffland <joseph@cauldrondevelopment.com>
20:55:20:           Args: --open-web-control
20:55:20:         Config: C:\ProgramData\FAHClient\config.xml
20:55:20:******************************** Build ********************************
20:55:20:        Version: 7.4.16
20:55:20:           Date: Jan 6 2017
20:55:20:           Time: 00:25:14
20:55:20:     Repository: Git
20:55:20:       Revision: a9e9e27dc2ee6ff01398c439677bc27f6cb74032
20:55:20:         Branch: master
20:55:20:       Compiler: Visual C++ 2008
20:55:20:        Options: /TP /nologo /EHa /wd4297 /wd4103 /Ox -arch:SSE /MT
20:55:20:       Platform: win32 10
20:55:20:           Bits: 32
20:55:20:           Mode: Release
20:55:20:******************************* System ********************************
20:55:20:            CPU: AMD Ryzen Threadripper 1920X 12-Core Processor
20:55:20:         CPU ID: AuthenticAMD Family 23 Model 1 Stepping 1
20:55:20:           CPUs: 24
20:55:20:         Memory: 11.88GiB
20:55:20:    Free Memory: 8.51GiB
20:55:20:        Threads: WINDOWS_THREADS
20:55:20:     OS Version: 6.2
20:55:20:    Has Battery: false
20:55:20:     On Battery: false
20:55:20:     UTC Offset: -6
20:55:20:            PID: 15440
20:55:20:            CWD: C:\ProgramData\FAHClient
20:55:20:             OS: Windows 10 Pro
20:55:20:        OS Arch: AMD64
20:55:20:           GPUs: 2
20:55:20:          GPU 0: Bus:9 Slot:0 Func:0 NVIDIA:5 GM206 [GeForce GTX 960] 2308
20:55:20:          GPU 1: Bus:65 Slot:0 Func:0 NVIDIA:5 GM204 [GeForce GTX 980] 4612
20:55:20:  CUDA Device 0: Platform:0 Device:0 Bus:65 Slot:0 Compute:5.2 Driver:9.0
20:55:20:  CUDA Device 1: Platform:0 Device:1 Bus:9 Slot:0 Compute:5.2 Driver:9.0
20:55:20:OpenCL Device 0: Platform:0 Device:0 Bus:65 Slot:0 Compute:1.2 Driver:385.69
20:55:20:OpenCL Device 1: Platform:0 Device:1 Bus:9 Slot:0 Compute:1.2 Driver:385.69
20:55:20:  Win32 Service: false
20:55:20:***********************************************************************
20:55:20:<config>
20:55:20:  <!-- Folding Slot Configuration -->
20:55:20:  <cause v='PARKINSONS'/>
20:55:20:
20:55:20:  <!-- User Information -->
20:55:20:  <passkey v='********************************'/>
20:55:20:  <team v='32'/>
20:55:20:  <user v='deeppow'/>
20:55:20:
20:55:20:  <!-- Folding Slots -->
20:55:20:  <slot id='0' type='CPU'/>
20:55:20:  <slot id='1' type='GPU'/>
20:55:20:  <slot id='2' type='GPU'/>
20:55:20:</config>
20:55:20:Trying to access database...
20:55:20:Successfully acquired database lock
20:55:20:Enabled folding slot 00: READY cpu:21
20:55:20:Enabled folding slot 01: READY gpu:0:GM206 [GeForce GTX 960] 2308
20:55:20:Enabled folding slot 02: READY gpu:1:GM204 [GeForce GTX 980] 4612
20:55:20:ERROR:Exception: Failed to register systray icon: Unspecified error
20:55:20:WU01:FS01:Starting
20:55:20:WU01:FS01:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\ProgramData\FAHClient\cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 01 -suffix 01 -version 704 -lifeline 15440 -checkpoint 15 -gpu-vendor nvidia -opencl-platform 0 -opencl-device 1 -cuda-device 1 -gpu 1
20:55:20:WU01:FS01:Started FahCore on PID 13944
20:55:20:WU01:FS01:Core PID:18528
20:55:20:WU01:FS01:FahCore 0x21 started
20:55:20:WU02:FS02:Starting
20:55:20:WU02:FS02:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\ProgramData\FAHClient\cores/fahwebx.stanford.edu/cores/Win32/AMD64/NVIDIA/Fermi/Core_21.fah/FahCore_21.exe -dir 02 -suffix 01 -version 704 -lifeline 15440 -checkpoint 15 -gpu-vendor nvidia -opencl-platform 0 -opencl-device 0 -cuda-device 0 -gpu 0
20:55:20:WU02:FS02:Started FahCore on PID 6784
20:55:20:WU02:FS02:Core PID:13260
20:55:20:WU02:FS02:FahCore 0x21 started
20:55:20:WU03:FS00:Starting
20:55:20:WU03:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\ProgramData\FAHClient\cores/fahwebx.stanford.edu/cores/Win32/AMD64/AVX/Core_a7.fah/FahCore_a7.exe -dir 03 -suffix 01 -version 704 -lifeline 15440 -checkpoint 15 -np 21
20:55:20:WU03:FS00:Started FahCore on PID 11440
20:55:20:WU03:FS00:Core PID:19020
20:55:20:WU03:FS00:FahCore 0xa7 started
20:55:20:WU01:FS01:0x21:*********************** Log Started 2017-10-11T20:55:20Z ***********************
20:55:20:WU01:FS01:0x21:Project: 9415 (Run 2415, Clone 0, Gen 234)
20:55:20:WU01:FS01:0x21:Unit: 0x00000110ab436c9d585e06dfdc1daf6c
20:55:20:WU01:FS01:0x21:CPU: 0x00000000000000000000000000000000
20:55:20:WU01:FS01:0x21:Machine: 1
20:55:20:WU01:FS01:0x21:Digital signatures verified
20:55:20:WU01:FS01:0x21:Folding@home GPU Core21 Folding@home Core
20:55:20:WU01:FS01:0x21:Version 0.0.18
20:55:21:WU02:FS02:0x21:*********************** Log Started 2017-10-11T20:55:20Z ***********************
20:55:21:WU02:FS02:0x21:Project: 9431 (Run 645, Clone 1, Gen 136)
20:55:21:WU02:FS02:0x21:Unit: 0x0000009fab436c9d586fdd38c0f052cc
20:55:21:WU02:FS02:0x21:CPU: 0x00000000000000000000000000000000
20:55:21:WU02:FS02:0x21:Machine: 2
20:55:21:WU02:FS02:0x21:Digital signatures verified
20:55:21:WU02:FS02:0x21:Folding@home GPU Core21 Folding@home Core
20:55:21:WU02:FS02:0x21:Version 0.0.18
20:55:21:WU02:FS02:0x21:  Found a checkpoint file
20:55:21:WARNING:FS02:Size of positions 418 does not match topology 406
20:55:21:WU03:FS00:0xa7:*********************** Log Started 2017-10-11T20:55:20Z ***********************
20:55:21:WU03:FS00:0xa7:************************** Gromacs Folding@home Core ***************************
20:55:21:WU03:FS00:0xa7:       Type: 0xa7
20:55:21:WU03:FS00:0xa7:       Core: Gromacs
20:55:21:WU03:FS00:0xa7:    Website: http://folding.stanford.edu/
20:55:21:WU03:FS00:0xa7:  Copyright: (c) 2009-2016 Stanford University
20:55:21:WU03:FS00:0xa7:     Author: Joseph Coffland <joseph@cauldrondevelopment.com>
20:55:21:WU03:FS00:0xa7:       Args: -dir 03 -suffix 01 -version 704 -lifeline 11440 -checkpoint 15 -np
20:55:21:WU03:FS00:0xa7:             21
20:55:21:WU03:FS00:0xa7:     Config: <none>
20:55:21:WU03:FS00:0xa7:************************************ Build *************************************
20:55:21:WU03:FS00:0xa7:    Version: 0.0.11
20:55:21:WU03:FS00:0xa7:       Date: Sep 21 2016
20:55:21:WU03:FS00:0xa7:       Time: 01:43:48
20:55:21:WU03:FS00:0xa7: Repository: Git
20:55:21:WU03:FS00:0xa7:   Revision: 957bd90e68d95ddcf1594dc15ff6c64cc4555146
20:55:21:WU03:FS00:0xa7:     Branch: master
20:55:21:WU03:FS00:0xa7:   Compiler: GNU 4.2.1 Compatible Clang 3.9.0 (trunk 274080)
20:55:21:WU03:FS00:0xa7:    Options: -std=gnu++98 -O3 -funroll-loops -ffast-math -mfpmath=sse
20:55:21:WU03:FS00:0xa7:             -fno-unsafe-math-optimizations -msse2 -I/mingw64/include
20:55:21:WU03:FS00:0xa7:             -Wno-inconsistent-dllimport -Wno-parentheses-equality
20:55:21:WU03:FS00:0xa7:             -Wno-deprecated-register -Wno-unused-local-typedef
20:55:21:WU03:FS00:0xa7:   Platform: linux2 4.6.0-1-amd64
20:55:21:WU03:FS00:0xa7:       Bits: 64
20:55:21:WU03:FS00:0xa7:       Mode: Release
20:55:21:WU03:FS00:0xa7:       SIMD: avx_256
20:55:21:WU03:FS00:0xa7:************************************ System ************************************
20:55:21:WU03:FS00:0xa7:        CPU: AMD Ryzen Threadripper 1920X 12-Core Processor
20:55:21:WU03:FS00:0xa7:     CPU ID: AuthenticAMD Family 23 Model 1 Stepping 1
20:55:21:WU03:FS00:0xa7:       CPUs: 24
20:55:21:WU03:FS00:0xa7:     Memory: 11.88GiB
20:55:21:WU03:FS00:0xa7:Free Memory: 8.47GiB
20:55:21:WU03:FS00:0xa7:    Threads: WINDOWS_THREADS
20:55:21:WU03:FS00:0xa7: OS Version: 6.2
20:55:21:WU03:FS00:0xa7:Has Battery: false
20:55:21:WU03:FS00:0xa7: On Battery: false
20:55:21:WU03:FS00:0xa7: UTC Offset: -6
20:55:21:WU03:FS00:0xa7:        PID: 19020
20:55:21:WU03:FS00:0xa7:        CWD: C:\ProgramData\FAHClient\work
20:55:21:WU03:FS00:0xa7:         OS: Windows 10 Pro
20:55:21:WU03:FS00:0xa7:    OS Arch: AMD64
20:55:21:WU03:FS00:0xa7:********************************************************************************
20:55:21:WU03:FS00:0xa7:Project: 8217 (Run 5, Clone 21, Gen 67)
20:55:21:WU03:FS00:0xa7:Unit: 0x00000054868b340358ed407ddff176b1
20:55:21:WU03:FS00:0xa7:Reading tar file core.xml
20:55:21:WU03:FS00:0xa7:Reading tar file frame67.tpr
20:55:21:WU03:FS00:0xa7:Digital signatures verified
20:55:21:WU03:FS00:0xa7:Calling: mdrun -cpo frame67.cpt -s frame67.tpr -x frame67.xtc -e frame67.edr -cpi frame67.cpt -cpt 15 -nt 21
20:55:21:WU03:FS00:0xa7:ERROR:
20:55:21:WU03:FS00:0xa7:ERROR:-------------------------------------------------------
20:55:21:WU03:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
20:55:21:WU03:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/programs/mdrun/runner.c, line: 879
20:55:21:WU03:FS00:0xa7:ERROR:
20:55:21:WU03:FS00:0xa7:ERROR:Fatal error:
20:55:21:WU03:FS00:0xa7:ERROR:More than 1 OpenMP thread requested, but Gromacs was compiled without OpenMP support
20:55:21:WU03:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
20:55:21:WU03:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
20:55:21:WU03:FS00:0xa7:ERROR:-------------------------------------------------------
20:55:22:WU01:FS01:0x21:Completed 0 out of 6250000 steps (0%)
20:55:22:WU01:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
20:55:23:WU02:FS02:0x21:Completed 50000 out of 6250000 steps (0%)
20:55:23:WU02:FS02:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
20:55:25:16:127.0.0.1:New Web connection
20:55:26:WU03:FS00:0xa7:ERROR:
20:55:26:WU03:FS00:0xa7:ERROR:
20:55:26:WU03:FS00:0xa7:ERROR:-------------------------------------------------------
20:55:26:WU03:FS00:0xa7:ERROR:-------------------------------------------------------
20:55:26:WU03:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
20:55:26:WU03:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
20:55:26:WU03:FS00:0xa7:ERROR:
20:55:26:WU03:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
20:55:26:WU03:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
20:55:26:WU03:FS00:0xa7:WARNING:Unexpected exit() call
20:55:26:WU03:FS00:0xa7:ERROR:-------------------------------------------------------
20:55:26:WU03:FS00:0xa7:ERROR:
20:55:26:WU03:FS00:0xa7:ERROR:
20:55:26:WU03:FS00:0xa7:ERROR:
20:55:26:WU03:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
20:55:26:WU03:FS00:0xa7:ERROR:Fatal error:
20:55:26:WU03:FS00:0xa7:ERROR:-------------------------------------------------------
20:55:26:WU03:FS00:0xa7:ERROR:Fatal error:
20:55:26:WU03:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
20:55:26:WU03:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (24) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
20:55:26:WU03:FS00:0xa7:ERROR:Program GROMACS, VERSION 5.0.4-20160919-669094a-unknown
20:55:26:WU03:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (24) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
20:55:26:WU03:FS00:0xa7:ERROR:
20:55:26:WU03:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
20:55:26:WU03:FS00:0xa7:ERROR:Source code file: /host/windows-cross-64bit-core-a7-avx-release/gromacs-core/build/gromacs/src/gromacs/gmxlib/gmx_omp_nthreads.c, line: 211
20:55:26:WU03:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
20:55:26:WU03:FS00:0xa7:ERROR:Fatal error:
20:55:26:WU03:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
20:55:26:WU03:FS00:0xa7:ERROR:
20:55:26:WU03:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
20:55:26:WU03:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (24) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
20:55:26:WU03:FS00:0xa7:ERROR:-------------------------------------------------------
20:55:26:WU03:FS00:0xa7:ERROR:Fatal error:
20:55:26:WU03:FS00:0xa7:ERROR:-------------------------------------------------------
20:55:26:WU03:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
20:55:26:WU03:FS00:0xa7:ERROR:Environment variable OMP_NUM_THREADS (24) and the number of threads requested on the command line (1) have different values. Either omit one, or set them both to the same value.
20:55:26:WU03:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
20:55:26:WU03:FS00:0xa7:ERROR:For more information and tips for troubleshooting, please check the GROMACS
20:55:26:WU03:FS00:0xa7:ERROR:-------------------------------------------------------
20:55:26:WU03:FS00:0xa7:ERROR:website at http://www.gromacs.org/Documentation/Errors
20:55:26:WU03:FS00:0xa7:ERROR:-------------------------------------------------------
20:55:39:WARNING:WU03:FS00:FahCore returned an unknown error code which probably indicates that it crashed
20:55:39:WARNING:WU03:FS00:FahCore returned: UNKNOWN_ENUM (-1073741784 = 0xc0000028)
20:55:39:WARNING:WU03:FS00:Too many errors, failing
20:55:39:WU03:FS00:Sending unit results: id:03 state:SEND error:FAILED project:8217 run:5 clone:21 gen:67 core:0xa7 unit:0x00000054868b340358ed407ddff176b1
20:55:39:WU03:FS00:Connecting to 134.139.52.3:8080
20:55:39:WU03:FS00:Server responded WORK_ACK (400)
20:55:39:WU03:FS00:Cleaning up
20:55:39:WU00:FS00:Connecting to 171.67.108.45:8080
20:55:40:WU00:FS00:Assigned to work server 171.67.108.158
20:55:40:WU00:FS00:Requesting new work unit for slot 00: READY cpu:21 from 171.67.108.158
20:55:40:WU00:FS00:Connecting to 171.67.108.158:8080
20:55:40:WU00:FS00:Downloading 806.98KiB
20:55:41:WU00:FS00:Download complete
20:55:41:WU00:FS00:Received Unit: id:00 state:DOWNLOAD error:NO_ERROR project:9038 run:223 clone:1 gen:1468 core:0xa4 unit:0x0000062aab436c9e56982a098f460467
20:55:41:WU00:FS00:Downloading core from http://fahwebx.stanford.edu/cores/Win32/AMD64/Core_a4.fah
20:55:41:WU00:FS00:Connecting to fahwebx.stanford.edu:80
20:55:41:WU00:FS00:FahCore a4: Downloading 2.89MiB
20:55:43:WU00:FS00:FahCore a4: Download complete
20:55:43:WU00:FS00:Valid core signature
20:55:43:WU00:FS00:Unpacked 9.59MiB to cores/fahwebx.stanford.edu/cores/Win32/AMD64/Core_a4.fah/FahCore_a4.exe
20:55:43:WU00:FS00:Starting
20:55:43:WARNING:WU00:FS00:AS lowered CPUs from 21 to 20
20:55:43:WU00:FS00:Running FahCore: "C:\Program Files (x86)\FAHClient/FAHCoreWrapper.exe" C:\ProgramData\FAHClient\cores/fahwebx.stanford.edu/cores/Win32/AMD64/Core_a4.fah/FahCore_a4.exe -dir 00 -suffix 01 -version 704 -lifeline 15440 -checkpoint 15 -np 20
20:55:43:WU00:FS00:Started FahCore on PID 14392
20:55:43:WU00:FS00:Core PID:13268
20:55:43:WU00:FS00:FahCore 0xa4 started
20:55:44:WU00:FS00:0xa4:
20:55:44:WU00:FS00:0xa4:*------------------------------*
20:55:44:WU00:FS00:0xa4:Folding@Home Gromacs GB Core
20:55:44:WU00:FS00:0xa4:Version 2.27 (Dec. 15, 2010)
20:55:44:WU00:FS00:0xa4:
20:55:44:WU00:FS00:0xa4:Preparing to commence simulation
20:55:44:WU00:FS00:0xa4:- Looking at optimizations...
20:55:44:WU00:FS00:0xa4:- Created dyn
20:55:44:WU00:FS00:0xa4:- Files status OK
20:55:44:WU00:FS00:0xa4:- Expanded 825840 -> 1402860 (decompressed 169.8 percent)
20:55:44:WU00:FS00:0xa4:Called DecompressByteArray: compressed_data_size=825840 data_size=1402860, decompressed_data_size=1402860 diff=0
20:55:44:WU00:FS00:0xa4:- Digital signature verified
20:55:44:WU00:FS00:0xa4:
20:55:44:WU00:FS00:0xa4:Project: 9038 (Run 223, Clone 1, Gen 1468)
20:55:44:WU00:FS00:0xa4:
20:55:44:WU00:FS00:0xa4:Assembly optimizations on if available.
20:55:44:WU00:FS00:0xa4:Entering M.D.
20:55:45:WU02:FS02:0x21:Completed 62500 out of 6250000 steps (1%)
20:55:50:WU00:FS00:0xa4:Mapping NT from 20 to 20
20:55:50:WU00:FS00:0xa4:Completed 0 out of 250000 steps  (0%)
deeppow
 
Posts: 13
Joined: Thu Oct 28, 2010 1:56 pm
Location: Los Alamos, NM

Re: Threadripper experience?

Postby JimboPalmer » Wed Oct 11, 2017 10:27 pm

deeppow wrote:Jimbo, Did reset OMP_NUM_THREADS to 24.


I would have sworn Nathon_P's link said to unset OMP_NUM_THREADS so it had no value. It hates having a conflict.

Did you try to modify your config manually? It still is trying 21 threads.

In Advance Control, Configuration, Slots, CPU, Edit, and set it to 20.
Last edited by JimboPalmer on Wed Oct 11, 2017 10:32 pm, edited 1 time in total.
JimboPalmer
 
Posts: 2041
Joined: Mon Feb 16, 2009 5:12 am
Location: Greenwood MS USA

Re: Threadripper experience?

Postby deeppow » Wed Oct 11, 2017 10:29 pm

Murphy strikes again.

I had shut down the FAHclient and other FAH executables after my standard error messages. Then to get a screen shot of the message, I restarted FAH and it now appears to be running fine.

I don't understand all I know! In dealing with computers, I've found that sometimes you just move on.
deeppow
 
Posts: 13
Joined: Thu Oct 28, 2010 1:56 pm
Location: Los Alamos, NM

Re: Threadripper experience?

Postby deeppow » Wed Oct 11, 2017 10:31 pm

Jimbo,

The problem is that to run multiple threaded programs I've created, they do use OMP_NUM_THREADS to create the threads. For example Intel compilers.
deeppow
 
Posts: 13
Joined: Thu Oct 28, 2010 1:56 pm
Location: Los Alamos, NM

Next

Return to V7.4.4 Public Release Windows/Linux/MacOS X (deprecated)

Who is online

Users browsing this forum: No registered users and 1 guest

cron