Folding pauses randomly

Moderators: Site Moderators, FAHC Science Team

Folding pauses randomly

Postby DanTerzian » Fri Mar 30, 2018 4:20 am

I have a newer Lenovo laptop that I started using for folding last December and it worked fine for a couple of months. It has a NVidea GPU but other than that, it is pretty much a standard laptop running Windows 10. But the last few weeks it would just stop folding at random times and would not restart until I manually closed the program and then restarted it. Today I noticed that both the CPU & the GPU were both paused and it said paused by user. Not me!

Now I notice after I restarted that the control says it will pause after the work unit is finished. It looks like the program paused 3 days ago and I just discovered it today. The excerpt from the log file on the day it shut down is below:

06:32:55:WU00:FS01:0x21: Found a checkpoint file
06:32:56:WU00:FS01:0x21:Completed 3000000 out of 5000000 steps (60%)
06:32:56:WU00:FS01:0x21:Temperature control disabled. Requirements: single Nvidia GPU, tmax must be < 110 and twait >= 900
06:33:01:FS00:Paused
06:33:01:FS01:Paused
06:33:01:FS01:Shutting core down
06:33:01:WU00:FS01:0x21:WARNING:Console control signal 1 on PID 12608
06:33:01:WU00:FS01:0x21:Exiting, please wait. . .
06:33:02:WU00:FS01:FahCore returned: INTERRUPTED (102 = 0x66)
06:33:19:Saving configuration to config.xml

One other thing. The little circles that are on the web control page (the circles with the arrows inside that spin next to the scroll bar) are now yellow, not green.

Can anyone tell me what might be going on?

Thanks much
DanTerzian
 
Posts: 10
Joined: Sat Mar 15, 2014 7:51 pm

Re: Folding pauses randomly

Postby bruce » Fri Mar 30, 2018 8:45 am

Post the first few pages of your log per the link below.

The messages

06:33:01:FS01:Shutting core down
06:33:01:WU00:FS01:0x21:WARNING:Console control signal 1 on PID 12608
06:33:01:WU00:FS01:0x21:Exiting, please wait. . .
06:33:02:WU00:FS01:FahCore returned: INTERRUPTED (102 = 0x66)
06:33:19:Saving configuration to config.xml

indicate that FAHClient was responding to control signal 1, which is a request from another task for FAH to pause.

Is your client configured to run only when your system is idle?
bruce
 
Posts: 20009
Joined: Thu Nov 29, 2007 11:13 pm
Location: So. Cal.

Re: Folding pauses randomly

Postby arnaud » Thu May 31, 2018 12:23 am

Hello,

For several weeks, I also have this error.
Previously, everything worked normally.

23:21:47:WU00:FS00:0xa4:- Digital signature verified
23:21:47:WU00:FS00:0xa4:
23:21:47:WU00:FS00:0xa4:Project: 9035 (Run 886, Clone 0, Gen 1200)
23:21:47:WU00:FS00:0xa4:
23:21:47:WU00:FS00:0xa4:Entering M.D.
23:21:47:WU01:FS01:0x21:*********************** Log Started 2018-05-30T23:21:47Z ***********************
23:21:47:WU01:FS01:0x21:Project: 11713 (Run 19, Clone 159, Gen 84)
23:21:47:WU01:FS01:0x21:Unit: 0x000000748ca304e75adf7aff358e1531
23:21:47:WU01:FS01:0x21:CPU: 0x00000000000000000000000000000000
23:21:47:WU01:FS01:0x21:Machine: 1
23:21:47:WU01:FS01:0x21:Reading tar file core.xml
23:21:47:WU01:FS01:0x21:Reading tar file integrator.xml
23:21:47:WU01:FS01:0x21:Reading tar file state.xml
23:21:47:WU01:FS01:0x21:Reading tar file system.xml
23:21:47:WU01:FS01:0x21:Digital signatures verified
23:21:47:WU01:FS01:0x21:Folding@home GPU Core21 Folding@home Core
23:21:47:WU01:FS01:0x21:Version 0.0.18
23:21:48:WU01:FS01:FahCore returned: INTERRUPTED (102 = 0x66)
23:21:54:WU00:FS00:FahCore returned: INTERRUPTED (102 = 0x66)

Thanks much
arnaud
 
Posts: 1
Joined: Thu May 31, 2018 12:19 am

Re: Folding pauses randomly

Postby toTOW » Sat Jun 02, 2018 6:30 pm

With so little information about your system and how you set up the client, we won't be able to help. See link in bruce's signature to provide more details.
Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.

FAH-Addict : latest news, tests and reviews about Folding@Home project.

Image
User avatar
toTOW
Site Moderator
 
Posts: 5648
Joined: Sun Dec 02, 2007 11:38 am
Location: Bordeaux, France


Return to V7.4.4 Public Release Windows/Linux/MacOS X (deprecated)

Who is online

Users browsing this forum: No registered users and 2 guests

cron