FaH won't start folding

[Cwazywazy]

So, I recently installed a Geforce 8800GTS in my second PCI-E slot mainly for PhysX. My main GPU is a 650ti. I tried to fold on it but apparently the 8800 isn't supported anymore but it also made my other GPU and my CPU stop folding too. I took out the card and completely reinstalled FAH. That worked, but I wanted to play some Mafia II so I put the card back in for a while but now I have it out again and even though I completely reinstalled FAH again (Twice) it won't work at all. The CPU and GPU say they are running but they won't move off of 0% and the PPD is stuck at "Unknown".

The errors log says this:
*********************** Log Started 2014-02-22T07:10:25Z ***********************
07:11:17:WARNING:Exception: 8:127.0.0.1: Send error: 10053: An established connection was aborted by the software in your host machine.

That's the same error I was getting when I had my 8800 in. I've tried running FAH as administrator. I've already asked for help on the forum I fold for, but that was no help so I'm hoping you guys can help me?

Also, I tried using an older version of FAH earlier to try and fold on my 8800 but that wouldn't work either.

[P5-133XL]

Need more information. Could you please post the log, including the system and config portions.

The warning you are seeing is entirely cosmetic. It just means you closed the browser-based web control.

[PantherX]

Welcome to the F@H Forum Cwazywazy,

Please note that your GPU, GeForce 8800 GTS is indeed on the whitelist of V7 (viewtopic.php?f=83&t=21205) so it should be recognized by it. However, since you are having a Kepler GPU in the same system, the automatic configuration might be incorrect. If that happens, it can be fixed with a manual configuration. Once correctly configured, your 8800 GTS will be assigned FahCore_11 WUs but please note that they can be expected to end at some point in the future (http://folding.stanford.edu/home/remind ... -core78-2/).

For manual configuration of the GPUs, you can read how I did it (viewtopic.php?p=241145#p241145) but if you want additional details, can provide it too.

[Cwazywazy]

Welcome to the F@H Forum Cwazywazy,

Please note that your GPU, GeForce 8800 GTS is indeed on the whitelist of V7 (viewtopic.php?f=83&t=21205) so it should be recognized by it. However, since you are having a Kepler GPU in the same system, the automatic configuration might be incorrect. If that happens, it can be fixed with a manual configuration. Once correctly configured, your 8800 GTS will be assigned FahCore_11 WUs but please note that they can be expected to end at some point in the future (http://folding.stanford.edu/home/remind ... -core78-2/).

For manual configuration of the GPUs, you can read how I did it (viewtopic.php?p=241145#p241145) but if you want additional details, can provide it too.

Hmm. I'll try it and get back to you.