Can't upload to 128.252.203.9

Moderators: Site Moderators, FAHC Science Team

Post Reply
Jondar
Posts: 1
Joined: Fri Apr 10, 2020 12:41 am

Can't upload to 128.252.203.9

Post by Jondar »

Unable to upload to this server for most of the day...

Code: Select all

00:32:05:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:13824 run:540 clone:3 gen:16 core:0xa7 unit:0x0000001480fccb095c9248b7db34c5ae
00:32:05:WU01:FS00:Uploading 11.28MiB to 128.252.203.9
00:32:05:WU01:FS00:Connecting to 128.252.203.9:8080
00:32:11:WU01:FS00:Upload 44.33%
00:32:17:WU01:FS00:Upload complete
00:32:17:WU01:FS00:Server responded PLEASE_WAIT (464)
00:32:17:WARNING:WU01:FS00:Failed to send results, will try again later
00:34:42:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:13824 run:540 clone:3 gen:16 core:0xa7 unit:0x0000001480fccb095c9248b7db34c5ae
00:34:42:WU01:FS00:Uploading 11.28MiB to 128.252.203.9
00:34:42:WU01:FS00:Connecting to 128.252.203.9:8080
00:34:48:WU01:FS00:Upload 8.31%
00:35:07:WU01:FS00:Upload 47.10%
00:35:36:WU01:FS00:Upload 65.39%
00:35:45:WU01:FS00:Upload 78.13%
00:35:48:WU01:FS00:Upload complete
00:35:48:WU01:FS00:Server responded PLEASE_WAIT (464)
00:35:48:WARNING:WU01:FS00:Failed to send results, will try again later
00:37:59:WU00:FS00:0xa7:Completed 142500 out of 250000 steps (57%)
00:38:57:WU01:FS00:Sending unit results: id:01 state:SEND error:NO_ERROR project:13824 run:540 clone:3 gen:16 core:0xa7 unit:0x0000001480fccb095c9248b7db34c5ae
00:38:57:WU01:FS00:Uploading 11.28MiB to 128.252.203.9
00:38:57:WU01:FS00:Connecting to 128.252.203.9:8080
00:39:18:WARNING:WU01:FS00:WorkServer connection failed on port 8080 trying 80
00:39:18:WU01:FS00:Connecting to 128.252.203.9:80
00:39:18:WU01:FS00:Upload 0.55%
00:40:13:WU01:FS00:Upload 3.32%
00:40:23:WU01:FS00:Upload 7.20%
00:40:29:WU01:FS00:Upload 10.53%
00:40:36:WU01:FS00:Upload 12.75%
00:40:45:WU01:FS00:Upload 15.52%
00:41:02:WU01:FS00:Upload 19.39%
00:41:27:WU01:FS00:Upload 27.71%
00:41:35:WU01:FS00:Upload 32.14%
00:41:41:WU01:FS00:Upload 44.89%
00:41:48:WU01:FS00:Upload 57.63%
00:41:56:WU01:FS00:Upload 60.40%
00:42:03:WU01:FS00:Upload 66.50%
00:42:11:WU01:FS00:Upload 69.82%
00:42:25:WU01:FS00:Upload 70.38%
00:42:31:WU01:FS00:Upload 77.02%
00:42:37:WU01:FS00:Upload 84.78%
00:42:46:WU01:FS00:Upload 85.89%
00:42:52:WU01:FS00:Upload 89.22%
00:43:01:WU01:FS00:Upload 89.77%
00:43:07:WU01:FS00:Upload 95.87%
00:43:14:WU01:FS00:Upload 99.19%
00:43:18:WU01:FS00:Upload complete
00:43:18:WU01:FS00:Server responded PLEASE_WAIT (464)
00:43:18:WARNING:WU01:FS00:Failed to send results, will try again later
00:44:31:WU00:FS00:0xa7:Completed 145000 out of 250000 steps (58%)
Mod Edit: Added Code Tags - PantherX
PantherX
Site Moderator
Posts: 7020
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:

Re: Can't upload to 128.252.203.9

Post by PantherX »

Welcome to the F@H Forum Jondar,

The F@H Servers are under a massive load. The F@H Team is aware of it and hopefully, the issue will be resolved soon.
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
GrandAdmiralThrawn
Posts: 7
Joined: Wed Apr 01, 2020 4:54 pm

Re: Can't upload to 128.252.203.9

Post by GrandAdmiralThrawn »

I've just into the same issue. With that, the client is stuck in a bandwidth-wasting upload loop since one or two days. Is this really a server load issue? Just asking, because it's been a month. If the server is not accepting WUs at all, then maybe it's a configuration issue instead? Not sure, as I have no knowledge about how a F@H server actually works, and what error code 464 really means.

Anyway, I have just reported this issue to the server's operator. Let's see what he'll have to say. If it's really just the load, we can't do anything but wait I guess.
PantherX
Site Moderator
Posts: 7020
Joined: Wed Dec 23, 2009 9:33 am
Hardware configuration: V7.6.21 -> Multi-purpose 24/7
Windows 10 64-bit
CPU:2/3/4/6 -> Intel i7-6700K
GPU:1 -> Nvidia GTX 1080 Ti
§
Retired:
2x Nvidia GTX 1070
Nvidia GTX 675M
Nvidia GTX 660 Ti
Nvidia GTX 650 SC
Nvidia GTX 260 896 MB SOC
Nvidia 9600GT 1 GB OC
Nvidia 9500M GS
Nvidia 8800GTS 320 MB

Intel Core i7-860
Intel Core i7-3840QM
Intel i3-3240
Intel Core 2 Duo E8200
Intel Core 2 Duo E6550
Intel Core 2 Duo T8300
Intel Pentium E5500
Intel Pentium E5400
Location: Land Of The Long White Cloud
Contact:

Re: Can't upload to 128.252.203.9

Post by PantherX »

It is a mix. Once the issue is identified, it is resolved and then it reappears. The cycle has been going on for a bit longer than we expected to: viewtopic.php?p=332416#p332416

While it is a different server, they share the same location so those servers would be impacted which could indicate an underlying issue in the infrastructure of the lab (this can potentially lie with the Internal IT of that University which may be governed by a different set of rules).
ETA:
Now ↞ Very Soon ↔ Soon ↔ Soon-ish ↔ Not Soon ↠ End Of Time

Welcome To The F@H Support Forum Ӂ Troubleshooting Bad WUs Ӂ Troubleshooting Server Connectivity Issues
Post Reply