Old version download?

Moderators: Site Moderators, FAHC Science Team

Re: Old version download?

Postby JimboPalmer » Sun May 10, 2020 11:59 pm

Kililea wrote:Apparently I'm not allowed to post files (while being asked to) and the gaslighting approach in these forums is tiring. I give up, too much effort while being told I'm not seeing what I'm seeing. I'll keep going by what the client says is happening on the off chance it's accurate and assume if it's not then it doesn't matter anyway.


Our attempts to get the logs are so we can see what the computer is seeing, so as not to gaslight you. Here is a series of directions about how to post a log for various OSs you may have.

viewtopic.php?f=24&t=26036

If I had to guess, and at this point that is all anyone can do, sometimes you had a PassKey and sometime you didn't. That would resemble your situation. However, it sounded like you over wrote the version that was slow, so hounding you about the log for that version seemed counter productive, and I didn't.

The older version make you happier, that is most important. So long as you don't start claiming the new version is slower to others, I see no issue with you being happy.
Tsar of all the Rushers
I tried to remain childlike, all I achieved was childish.
A friend to those who want no friends
JimboPalmer
 
Posts: 2073
Joined: Mon Feb 16, 2009 5:12 am
Location: Greenwood MS USA

Re: Old version download?

Postby Neil-B » Mon May 11, 2020 12:08 am

Really sorry if you felt people were gaslighting you ... that was never my intention and I am sure it was not what other people intended ... all we were doing is explaining how the client software and the cores are programmes to work and that what you are seeing should not be happening/possible or at least not for the reasons you believe they are.

In the signature block for bruce above there is a link to guidance on how to post logs ... and honestly people will want to see them to try and understand what is causing the effect you are seeing ... it is something that hasn't been reported before and which is anomalous and so people will want to help but need the client logs to diagnose this ... people have been asking for the logs not because they disbelieve what you are witnessing but because they want to work out what is causing this effect.
1: 2x Xeon E5-2697v3@2.60GHz, 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent, Quadro K420 1GB, FAH 7.6.21
2: Xeon E3-1505Mv5@2.80GHz, 32GB DDR4, NVME, Win10 Pro, Quadro M1000M 2GB, FAH 7.6.21
3: i7-960@3.20GHz, 12GB DDR3, SSD, Win10 Pro, GTX 750Ti 2GB, FAH 7.6.21
Neil-B
 
Posts: 1504
Joined: Sun Mar 22, 2020 6:52 pm
Location: UK

Re: Old version download?

Postby JimboPalmer » Mon May 11, 2020 12:16 am

As a retired programmer, (not for F@H) I always built debug logs into my software. Hearing what the user thought the computer was doing and reading what the computer thought the human was doing, greatly shortened response time to fix the error.

(I don't speak French but supported sites in Quebec, having logs really helped. F@H logs are often at least partially in other languages, but still help solve the volunteer's problem)
JimboPalmer
 
Posts: 2073
Joined: Mon Feb 16, 2009 5:12 am
Location: Greenwood MS USA

Re: Old version download?

Postby Joe_H » Mon May 11, 2020 1:05 am

Kililea wrote:Apparently I'm not allowed to post files (while being asked to) and the gaslighting approach in these forums is tiring. I give up, too much effort while being told I'm not seeing what I'm seeing. I'll keep going by what the client says is happening on the off chance it's accurate and assume if it's not then it doesn't matter anyway.


There is nothing stopping you from posting files here, there is a limit to the size of text files though. But the information needed can easily be shown with extracts from files that large.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
Joe_H
Site Admin
 
Posts: 6696
Joined: Tue Apr 21, 2009 5:41 pm
Location: W. MA

Re: Old version download?

Postby bruce » Tue Jun 02, 2020 6:08 am

ajm wrote:This morning, I swapped GPUs on my machines and a 1050ti landed in a PC running FAH 7.6.13. During over three minutes, at the first job allocated to that 1050ti, its PPD was around 2.2M (10-12 times its possible output). :shock: :D

They are right, Kililea, the version of the client doesn't affect the processing speed, at all. This software has nothing to do with it. But at the beginning of the folding, the estimated PPD can go all over the place.


Please ignore the PPD during (more than) the first 3 minutes of processing. As I said previously, that's not long enough for FAH to measure enough progress over enough time span to make a reasonable projection of progress.

Since you say you swapped GPUs and machines, did you confirm that the PCIe bus is the same speed?
bruce
 
Posts: 20152
Joined: Thu Nov 29, 2007 11:13 pm
Location: So. Cal.

Re: Old version download?

Postby ajm » Tue Jun 02, 2020 6:19 am

Honestly, I can't remember exactly. I have had a lot of hardware changes, voluntary and not, in the course of last month. There might have been a change of PCIe speed, from 16x to 8x, though.
ajm
 
Posts: 641
Joined: Sat Mar 21, 2020 6:22 am
Location: Lucerne, Switzerland

Previous

Return to V7.5.1 Public Release Windows/Linux/MacOS X

Who is online

Users browsing this forum: No registered users and 3 guests

cron