GeForce RTX 3080 and 3090 support enabled !

Post requests to add new GPUs to the official whitelist here.

Moderators: Site Moderators, FAHC Science Team

Gnomuz
Posts: 31
Joined: Sat Nov 21, 2020 5:07 pm

Re: GeForce RTX 3080 and 3090 support enabled !

Post by Gnomuz »

Bastiaan_NL wrote:On my cards I see the following with P13428 on Windows:

40 seconds tpf on a 3090 with 6.4 million ppd
52 seconds tpf on a 2080ti with 4.5 million ppd
64 seconds tpf on a 2080 super with 3.3 million ppd

So if your 3060ti is at 3.1 million ppd with 190W, that sounds pretty good to me considering that it's brand new (drivers etc).
I now have 30 relevant finished WUs on Linux with the 3060 Ti since Saturday afternoon, all from p13428 (filtering out the first WU and the ones which were paused for circa 15 min by the daily backup) :
  • Average TPF is 1'06", average PPD 3,120k, with a standard dev of 5K PPD (0,16%)
    Average GPU Power draw is 189W (16,5k PPD/W)
    No failed units
So, it's rock stable, and as you say, it should improve over time with optimized drivers and perhaps a bit of power limiting. For the moment, I think this GPU offers great value for money, compared with the previous gen at least !
Image

Nvidia RTX 3060 Ti & GTX 1660 Super - AMD Ryzen 7 5800X - MSI MEG X570 Unify - 16 GB RAM - Ubuntu 20.04.2 LTS - Nvidia drivers 460.56
HaloJones
Posts: 920
Joined: Thu Jul 24, 2008 10:16 am

Re: GeForce RTX 3080 and 3090 support enabled !

Post by HaloJones »

Now if only I could actually buy one!
single 1070

Image
Duce H_K_
Posts: 113
Joined: Mon Nov 09, 2015 3:52 pm
Hardware configuration: MoBo•Gigabye X99 UD4-CF F24
CPU•<UPD 20.05.2023>Xeon V3 2680 V4 14c28t 35Mb L3
RAM•DDR4 Hynix 2133 CL14 4*16 DualRank Quad channel
HDD•ST1000DM003 Sata3 NCQ
GFX•GT220
PSU•Chieftec GPS750C 80+ Gold after repair
Cooling•Air 2xDeepCool UF120

Internet•200Mbit/s FTTB↓ white dynamic, ERTH, router RB951G-2HnD

Other•Redmi 7A <runs WUProp :-/>
Location: Russia
Contact:

Re: GeForce RTX 3080 and 3090 support enabled !

Post by Duce H_K_ »

I dreamed for so long about being able to purchase my first PC. And it finally it happened. This kind of feeding of the egregor might be useful here
I also want to change my old 1070 to RTX3k series
   510 290 819 pts earned in Folding@home project
Kjetil
Posts: 178
Joined: Sat Apr 14, 2012 5:56 pm
Location: Stavanger Norway

Re: GeForce RTX 3080 and 3090 support enabled !

Post by Kjetil »

HaloJones wrote:Now if only I could actually buy one!
Have 5 3090 on folding. And 9 2080Ti.
HaloJones
Posts: 920
Joined: Thu Jul 24, 2008 10:16 am

Re: GeForce RTX 3080 and 3090 support enabled !

Post by HaloJones »

Kjetil wrote:
HaloJones wrote:Now if only I could actually buy one!
Have 5 3090 on folding. And 9 2080Ti.
Card hog :lol:
single 1070

Image
Burlingtonian
Posts: 82
Joined: Sun Apr 05, 2020 12:36 pm
Hardware configuration: 2 iMacs and 1 dedicated Windows 10 Pro rig with 1 RTX 2070 Super and 1 RTX 2060 KO
Location: Burlington, Ontario. Canada

Re: GeForce RTX 3080 and 3090 support enabled !

Post by Burlingtonian »

HaloJones wrote:Now if only I could actually buy one!
Yesterday my local computer supplier finally secured a single MSI 3080 card but at a 35% premium over MSRP, so I declined. Hopefully pricing will stabilize in 2021 once there is an adequate supply.
Image
Joe_H
Site Admin
Posts: 7854
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: GeForce RTX 3080 and 3090 support enabled !

Post by Joe_H »

I follow the PCMR reddit a bit, and there have been a few posts from people who have managed to get one of these for MSRP. So it is possible, and I wouldn't shop at any retailer that does charge a premium over that price anyways.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
gunnarre
Posts: 567
Joined: Sun May 24, 2020 7:23 pm
Location: Norway

Re: GeForce RTX 3080 and 3090 support enabled !

Post by gunnarre »

It sometimes doesn't depend on the retailer, but the add-in-board partner. For example, if a board partner like Asus, Gigabyte or MSI receive GPUs which can be overclocked, then they can sell those as a 3080 OC (factory overclocked) version, and earn more money on it, rather than selling it at MSRP without the factory overclock. In practice, a non-"OC" card might boost just as high as the OC card, but that's one way for the board partners to make more money without violating MSRP agreements with the GPU designer on the base model.

Some retailers mark the cards up even further than the AIB partner's MSRP, and frankly as long as supply is so low, that is perhaps preferable to the the scalper lottery at launch.

Given that the price per performance was one of the main selling points of this line of cards, the above-MSRP cards sort of negate the card's value.
Image
Online: GTX 1660 Super, GTX 1080, GTX 1050 Ti 4G OC, RX580 + occasional CPU folding in the cold.
Offline: Radeon HD 7770, GTX 960, GTX 950
bruce
Posts: 20910
Joined: Thu Nov 29, 2007 10:13 pm
Location: So. Cal.

Re: GeForce RTX 3080 and 3090 support enabled !

Post by bruce »

New posts split from this topic into a new topic: Subject: i have a problem with folding at home and my RTX 3090.
toTOW
Site Moderator
Posts: 6293
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: GeForce RTX 3080 and 3090 support enabled !

Post by toTOW »

0x220a / GA102 [GeForce RTX 3080 12GB] has just been added to the list of supported GPUs.
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
mchaker
Posts: 7
Joined: Mon Jan 17, 2022 3:30 pm
Hardware configuration: System: NUC (VM)
CPU: Intel Core i7-1165G7
RAM: 64 GB host (8 GB VM)
GPU1: AMD Radeon RX 5500 XT (via Thunderbolt3)
GPU2: NVIDIA TITAN Xp (via Thunderbolt3)
-----
System: GPU-GARDEN
CPU: AMD EPYC 7402
RAM: 128 GB DDR4
GPU1: NVIDIA Tesla M40
GPU2: NVIDIA Tesla M40
GPU3: NVIDIA Tesla M40
GPU4: NVIDIA Tesla M40
GPU5: NVIDIA Tesla P40
GPU6: NVIDIA Tesla P40
GPU7: NVIDIA Tesla P100
GPU8: NVIDIA Tesla P100
GPU9: NVIDIA Tesla P100
GPU10: NVIDIA Tesla P100
GPU11: NVIDIA GeForce RTX 3070
GPU12: NVIDIA GeForce RTX 3070 Ti
Location: between outer and cyberspace
Contact:

Re: GeForce RTX 3080 and 3090 support enabled !

Post by mchaker »

@toTOW what about the 3090 Ti?

I just started folding with it and it's taking an oddly long time to fold a small work unit.
Neil-B
Posts: 2027
Joined: Sun Mar 22, 2020 5:52 pm
Hardware configuration: 1: 2x Xeon E5-2697v3@2.60GHz, 512GB DDR4 LRDIMM, SSD Raid, Win10 Ent 20H2, Quadro K420 1GB, FAH 7.6.21
2: Xeon E3-1505Mv5@2.80GHz, 32GB DDR4, NVME, Win10 Pro 20H2, Quadro M1000M 2GB, FAH 7.6.21 (actually have two of these)
3: i7-960@3.20GHz, 12GB DDR3, SSD, Win10 Pro 20H2, GTX 750Ti 2GB, GTX 1080Ti 11GB, FAH 7.6.21
Location: UK

Re: GeForce RTX 3080 and 3090 support enabled !

Post by Neil-B »

Small atom count wu's can massively underperform on rtx30 series and even more so on the top end of those - would is ongoing in testing and re assignments to try and make sure those that really don't ... if you want a feel for how it could work try setting Alz for the cause - I believe this currently has some projects fairly large atom count wu's in play - whether they are big enough to really work a 3090Ti I am not sure.
2x Xeon E5-2697v3, 512GB DDR4 LRDIMM, SSD Raid, W10-Ent, Quadro K420
Xeon E3-1505Mv5, 32GB DDR4, NVME, W10-Pro, Quadro M1000M
i7-960, 12GB DDR3, SSD, W10-Pro, GTX1080Ti
i9-10850K, 64GB DDR4, NVME, W11-Pro, RTX3070

(Green/Bold = Active)
MeeLee
Posts: 1375
Joined: Tue Feb 19, 2019 10:16 pm

Re: GeForce RTX 3080 and 3090 support enabled !

Post by MeeLee »

There's still no way to set more than 1 project running on a GPU in the client?
The 3080 and up have roughly 4 times more shaders, and 2 to 2,5x the TMU, ROPs, SM count, RT cores, and Cache per SM.
The only thing that's roughly the same (less than 15% extra) on the 2060 and 3080, is the tensor cores.
Joe_H
Site Admin
Posts: 7854
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: GeForce RTX 3080 and 3090 support enabled !

Post by Joe_H »

MeeLee wrote: Sat Apr 09, 2022 2:52 pm There's still no way to set more than 1 project running on a GPU in the client?
That will require new features in the folding client software, possibly new features in the folding core or a new core, and possibly even changes to the server code. Right now they are concentrating on creating a new version 8 client, whether that will include the necessary features remains to be seen.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
toTOW
Site Moderator
Posts: 6293
Joined: Sun Dec 02, 2007 10:38 am
Location: Bordeaux, France
Contact:

Re: GeForce RTX 3080 and 3090 support enabled !

Post by toTOW »

mchaker wrote: Fri Apr 08, 2022 9:47 am @toTOW what about the 3090 Ti?

I just started folding with it and it's taking an oddly long time to fold a small work unit.
0x2203 / GA102 [GeForce RTX 3090 Ti] is in the list of supported GPUs. I got a request for it on Discord ...
Image

Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
Post Reply