Web control can use some touch up.

Moderators: Site Moderators, FAHC Science Team

Post Reply
Sandman192
Posts: 62
Joined: Fri Mar 07, 2008 12:40 am
Hardware configuration: SW: Windows 10 Professional 64-bit - Video Drivers v516.01
HW: ASUS - 1 EVGA GeForce 1080Ti 11GB RAM - 1 GeForce EVGA 980 4GB RAM - CPU i7-5930K 3.5GHz boost to 4GHz, 32GB of RAM

FAH v7.6.21

Web control can use some touch up.

Post by Sandman192 »

Can we do with out the Bus: Device: in Web Control. Hard to tell what GPU in the tabs. Exp: GPU:1:0 GPU102 [GEF and that's it.
And just have it say GPU 0 NVIDIA (1080Ti) - GPU 1 NVIDIA (980), APU 3x (AMD) CPU AMD (Ryzen 7 7700X). Somethin along those lines if you can make it shooter would be ok.
So much of it is cut off and how about widening the page. Even at 4K there's so much of the screen is not used from right to left and gets cut off at the bottom.
The Advance Controls shows all the details.

F@H v7.6.21
Joe_H
Site Admin
Posts: 7886
Joined: Tue Apr 21, 2009 4:41 pm
Hardware configuration: Mac Pro 2.8 quad 12 GB smp4
MacBook Pro 2.9 i7 8 GB smp2
Location: W. MA

Re: Web control can use some touch up.

Post by Joe_H »

Work on the v7 client is done, all development work is going towards the v8 client. You can try out the public beta of v8.3.5 - https://foldingathome.org/beta/. It only has a web based control, no FAHControl.
Image

iMac 2.8 i7 12 GB smp8, Mac Pro 2.8 quad 12 GB smp6
MacBook Pro 2.9 i7 8 GB smp3
calxalot
Site Moderator
Posts: 919
Joined: Sat Dec 08, 2007 1:33 am
Location: San Francisco, CA
Contact:

Re: Web control can use some touch up.

Post by calxalot »

Post Reply