Problem with WU - Project 3061 (Run 2, Clone 5, Gen 7)

Moderators: Site Moderators, FAHC Science Team

Post Reply
klasseng
Posts: 125
Joined: Thu Dec 27, 2007 6:08 am
Hardware configuration: System #1, Quad GPU:
Motherboard: Asus Rampage IV Extreme
CPU: 6 Core Intel i7 (3930K)
GPU: 4 X NVIDIA GForce GTS 450
OS: WIndows 7 Home Premium, 64-bit
RAM: 16GB

System #2:
MacPro 2,1 (Early 2007)
Dual Quad-Core Intel Xeon 3GHz (X5365)
9GB Memory
OS: Mac OS X 10.7.5
GPU: N/A
Location: Canada

Problem with WU - Project 3061 (Run 2, Clone 5, Gen 7)

Post by klasseng »

Project 3061 (Run 2, Clone 5, Gen 7)

This WU will run to 24% and then crash out:
[08:35:32] Completed 1200000 out of 5000000 steps (24 percent)
[08:35:32]
[08:35:32] Writing local files
[08:35:32] Completed 1200000 out of 5000000 steps (24 percent)
[08:35:32] Extra SSE boost OK.
[08:50:32] Timered checkpoint triggered.
[08:53:53] Warning: long 1-4 interactions
[08:53:55]
[08:53:55] Folding@home Core Shutdown: INTERRUPTED
[08:53:59] CoreStatus = 0 (0)
[08:53:59] Client-core communications error: ERROR 0x0
[08:53:59] Deleting current work unit & continuing...
It was happening on my 8 core (2 X quad core) MacPro.
Mac OS X 10.4.11
fah6
I restarted the WU and it crashed again. I moved the WU to a Core Duo Mac Mini. Same result.

If someone wants more info, there's a zip file of all the working files at:
http://www.medianorthpro.com/fah/3061.zip 6.3MB
Last edited by 7im on Fri Dec 28, 2007 4:38 am, edited 1 time in total.
Reason: Mod title with WU data
peace,
Grant
gwildperson
Posts: 450
Joined: Tue Dec 04, 2007 8:36 pm

Re: Problem with Project 3061

Post by gwildperson »

klasseng wrote:Warning: long 1-4 interactions
The message long 1-4 interactions is generally associated with protein atoms that are positioned incorrectly and cannot be simulated. Some WUs will inevitably reach conditions like this and if it's because of your hardware, it's probably not going to repeat exactly. If it's because of the configuration itself, the WUs with this error should be rare and should be ignored. We all get a few like that.
klasseng
Posts: 125
Joined: Thu Dec 27, 2007 6:08 am
Hardware configuration: System #1, Quad GPU:
Motherboard: Asus Rampage IV Extreme
CPU: 6 Core Intel i7 (3930K)
GPU: 4 X NVIDIA GForce GTS 450
OS: WIndows 7 Home Premium, 64-bit
RAM: 16GB

System #2:
MacPro 2,1 (Early 2007)
Dual Quad-Core Intel Xeon 3GHz (X5365)
9GB Memory
OS: Mac OS X 10.7.5
GPU: N/A
Location: Canada

Re: Problem with Project 3061

Post by klasseng »

So we don't need to report these?

peace,
Grant
peace,
Grant
gwildperson
Posts: 450
Joined: Tue Dec 04, 2007 8:36 pm

Re: Problem with Project 3061

Post by gwildperson »

klasseng wrote:So we don't need to report these?
I didn't say that ....

It's a good idea to report anything that says Deleting current work unit & continuing... but don't be surprised if you process the same WU 3 or 4 times before getting something new.
7im
Posts: 10189
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Problem with Project 3061

Post by 7im »

Did this work unit stop in the same place each time? or differnt % completed?
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
klasseng
Posts: 125
Joined: Thu Dec 27, 2007 6:08 am
Hardware configuration: System #1, Quad GPU:
Motherboard: Asus Rampage IV Extreme
CPU: 6 Core Intel i7 (3930K)
GPU: 4 X NVIDIA GForce GTS 450
OS: WIndows 7 Home Premium, 64-bit
RAM: 16GB

System #2:
MacPro 2,1 (Early 2007)
Dual Quad-Core Intel Xeon 3GHz (X5365)
9GB Memory
OS: Mac OS X 10.7.5
GPU: N/A
Location: Canada

Re: Problem with Project 3061

Post by klasseng »

same % - three times, 2X on one machine, 1X on the second
peace,
Grant
7im
Posts: 10189
Joined: Thu Nov 29, 2007 4:30 pm
Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
Location: Arizona
Contact:

Re: Problem with Project 3061

Post by 7im »

It's most likely a bad work unit, by your description of the symptoms. And no one else has completed this WU either, so that's my diagnosis. Move on to the next WU. Thanks for the report.
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Post Reply