i need program to gtx560 for folding
Moderators: Site Moderators, FAHC Science Team
i need program to gtx560 for folding
where can i download it ?
-
toTOW
- Site Moderator
- Posts: 6309
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: i need program to gtx560 for folding
GPU clients are on the High Speed clients page : http://folding.stanford.edu/English/DownloadWinOther
You can also try the v7 unified client if you like : viewtopic.php?f=67&t=20978
You can also try the v7 unified client if you like : viewtopic.php?f=67&t=20978
Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.
-
Fahrenheit451
- Posts: 90
- Joined: Sun Sep 19, 2010 9:25 am
- Hardware configuration: System 1:
CPU: Intel Core 2 Duo E6850, 3000 MHz (9 x 333)
Mainboard: Gigabyte P35-DS3P v1.1
RAM: 2 GB (2x1024 MB DDR2 Dual-Channel, DRAM frequency 400 MHz)
OS: Windows Vista Ultimate, 32 bit, Service Pack 2
HD: Samsung HD501LJ (500 GB)
PSU: BeQuiet Straight Power E8 CM 580W
Case: CoolerMaster Cosmos 1000
GPU: NVIDIA GeForce 8800 GTS 512, XFX Pine Group
GFX driver version: 285.62
The card runs at stock speed: GPU 648 MHz, Memory 972 Mhz, Shader 1620 MHz
System 2:
CPU: Intel i7 2600 (Sandy Bridge) @ 3400 MHz (4C/8T)
Mainboard: Asus P8H67-M-Pro
RAM: 8GB (2x4 GB DDR3, 1333 MHz, Kingston)
OS: Windows 7 Ultimate, 64bit
HD: Samsung HD103SJ (1TB)
PSU: BeQuiet Straight Power E8 CM 580 W
Case: Corsair Obsidian 800D with H100 water cooling
GPU: i7 2600 IGP (not for folding) / Gigabyte GTX 560 Ti OC 1GB - Location: Bonn, Germany
Re: i need program to gtx560 for folding
If you want to fold with a gtx 560 and FAH client V7 (I didn't tested it with v6) you will need probably the old 285.62 WHQL driver from nvidia. Current drivers like it to crash 
-
7im
- Posts: 10189
- Joined: Thu Nov 29, 2007 4:30 pm
- Hardware configuration: Intel i7-4770K @ 4.5 GHz, 16 GB DDR3-2133 Corsair Vengence (black/red), EVGA GTX 760 @ 1200 MHz, on an Asus Maximus VI Hero MB (black/red), in a blacked out Antec P280 Tower, with a Xigmatek Night Hawk (black) HSF, Seasonic 760w Platinum (black case, sleeves, wires), 4 SilenX 120mm Case fans with silicon fan gaskets and silicon mounts (all black), a 512GB Samsung SSD (black), and a 2TB Black Western Digital HD (silver/black).
- Location: Arizona
- Contact:
Re: i need program to gtx560 for folding
Current drivers have a problem with the power saving mode if it turns off the monitor. It crashes if used. Don't use it. 
How to provide enough information to get helpful support
Tell me and I forget. Teach me and I remember. Involve me and I learn.
Tell me and I forget. Teach me and I remember. Involve me and I learn.
-
MtM
- Posts: 1579
- Joined: Fri Jun 27, 2008 2:20 pm
- Hardware configuration: Q6600 - 8gb - p5q deluxe - gtx275 - hd4350 ( not folding ) win7 x64 - smp:4 - gpu slot
E6600 - 4gb - p5wdh deluxe - 9600gt - 9600gso - win7 x64 - smp:2 - 2 gpu slots
E2160 - 2gb - ?? - onboard gpu - win7 x32 - 2 uniprocessor slots
T5450 - 4gb - ?? - 8600M GT 512 ( DDR2 ) - win7 x64 - smp:2 - gpu slot - Location: The Netherlands
- Contact:
Re: i need program to gtx560 for folding
I saw this yesterday but didn't reply since I was really tired and afraid to make a stupid comment, but are you sure the problem with power saving is tied to V7 alone and not to V6? I am not sure either way but it's not logical to assume the fahcore's behave differently between the two clients so I'm leaning towards saying V6 has the same issues.Fahrenheit451 wrote:If you want to fold with a gtx 560 and FAH client V7 (I didn't tested it with v6) you will need probably the old 285.62 WHQL driver from nvidia. Current drivers like it to crash
I do agree that in lots of cases older driver are better then newer one's
-
toTOW
- Site Moderator
- Posts: 6309
- Joined: Sun Dec 02, 2007 10:38 am
- Location: Bordeaux, France
- Contact:
Re: i need program to gtx560 for folding
It's a driver issue ... so you'll see similar behavior with v7, v6 or even BOINC clients.
Folding@Home beta tester since 2002. Folding Forum moderator since July 2008.