Project 5753 multiple failures at start

Moderators: Site Moderators, FAHC Science Team

Post Reply
davidcoton
Posts: 1102
Joined: Wed Nov 05, 2008 3:19 pm
Location: Cambridge, UK

Project 5753 multiple failures at start

Post by davidcoton »

Code: Select all

[12:51:35] 
[12:51:35] Folding@home Core Shutdown: FINISHED_UNIT
[12:51:38] CoreStatus = 64 (100)
[12:51:38] Sending work to server
[12:51:38] Project: 5015 (Run 9, Clone 155, Gen 340)
[12:51:38] - Read packet limit of 540015616... Set to 524286976.


[12:51:38] + Attempting to send results [December 9 12:51:38 UTC]
[12:54:34] + Results successfully sent
[12:54:34] Thank you for your contribution to Folding@Home.
[12:54:34] + Number of Units Completed: 36

[12:54:38] - Preparing to get new work unit...
[12:54:38] + Attempting to get work packet
[12:54:38] - Connecting to assignment server
[12:54:39] - Successful: assigned to (171.67.108.11).
[12:54:39] + News From Folding@Home: GPU folding beta
[12:54:39] Loaded queue successfully.
[12:54:42] + Closed connections
[12:54:42] 
[12:54:42] + Processing work unit
[12:54:42] Core required: FahCore_11.exe
[12:54:42] Core found.
[12:54:42] Working on queue slot 06 [December 9 12:54:42 UTC]
[12:54:42] + Working ...
[12:54:42] 
[12:54:42] *------------------------------*
[12:54:42] Folding@Home GPU Core - Beta
[12:54:42] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[12:54:42] 
[12:54:42] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[12:54:42] Build host: amoeba
[12:54:42] Board Type: Nvidia
[12:54:42] Core      : 
[12:54:42] Preparing to commence simulation
[12:54:42] - Looking at optimizations...
[12:54:42] - Created dyn
[12:54:42] - Files status OK
[12:54:42] - Expanded 96771 -> 489240 (decompressed 505.5 percent)
[12:54:42] Called DecompressByteArray: compressed_data_size=96771 data_size=489240, decompressed_data_size=489240 diff=0
[12:54:42] - Digital signature verified
[12:54:42] 
[12:54:42] Project: 5753 (Run 8, Clone 231, Gen 1)
[12:54:42] 
[12:54:42] Assembly optimizations on if available.
[12:54:42] Entering M.D.
[12:54:51] Working on Protein
[12:54:52] mdrun_gpu returned 
[12:54:52] Going to send back what have done -- stepsTotalG=0
[12:54:52] Work fraction=0.0000 steps=0.
[12:54:56] logfile size=0 infoLength=0 edr=0 trr=25
[12:54:56] - Writing 637 bytes of core data to disk...
[12:54:56] Done: 125 -> 124 (compressed to 99.2 percent)
[12:54:56]   ... Done.
[12:54:57] 
[12:54:57] Folding@home Core Shutdown: UNSTABLE_MACHINE
[12:55:01] CoreStatus = 7A (122)
[12:55:01] Sending work to server
[12:55:01] Project: 5753 (Run 8, Clone 231, Gen 1)
[12:55:01] - Read packet limit of 540015616... Set to 524286976.


[12:55:01] + Attempting to send results [December 9 12:55:01 UTC]
[12:55:02] + Results successfully sent
[12:55:02] Thank you for your contribution to Folding@Home.
[12:55:06] - Preparing to get new work unit...
[12:55:06] + Attempting to get work packet
[12:55:06] - Connecting to assignment server
[12:55:07] - Successful: assigned to (171.67.108.11).
[12:55:07] + News From Folding@Home: GPU folding beta
[12:55:07] Loaded queue successfully.
[12:55:10] + Closed connections
[12:55:15] 
[12:55:15] + Processing work unit
[12:55:15] Core required: FahCore_11.exe
[12:55:15] Core found.
[12:55:15] Working on queue slot 07 [December 9 12:55:15 UTC]
[12:55:15] + Working ...
[12:55:15] 
[12:55:15] *------------------------------*
[12:55:15] Folding@Home GPU Core - Beta
[12:55:15] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[12:55:15] 
[12:55:15] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[12:55:15] Build host: amoeba
[12:55:15] Board Type: Nvidia
[12:55:15] Core      : 
[12:55:15] Preparing to commence simulation
[12:55:15] - Looking at optimizations...
[12:55:15] - Created dyn
[12:55:15] - Files status OK
[12:55:15] - Expanded 91476 -> 489240 (decompressed 534.8 percent)
[12:55:15] Called DecompressByteArray: compressed_data_size=91476 data_size=489240, decompressed_data_size=489240 diff=0
[12:55:15] - Digital signature verified
[12:55:15] 
[12:55:15] Project: 5753 (Run 11, Clone 230, Gen 0)
[12:55:15] 
[12:55:15] Assembly optimizations on if available.
[12:55:15] Entering M.D.
[12:55:22] Working on Protein
[12:55:22] mdrun_gpu returned 
[12:55:22] Going to send back what have done -- stepsTotalG=0
[12:55:22] Work fraction=0.0000 steps=0.
[12:55:27] logfile size=0 infoLength=0 edr=0 trr=25
[12:55:27] - Writing 637 bytes of core data to disk...
[12:55:27] Done: 125 -> 124 (compressed to 99.2 percent)
[12:55:27]   ... Done.
[12:55:30] 
[12:55:30] Folding@home Core Shutdown: UNSTABLE_MACHINE
[12:55:33] CoreStatus = 7A (122)
[12:55:33] Sending work to server
[12:55:33] Project: 5753 (Run 11, Clone 230, Gen 0)
[12:55:33] - Read packet limit of 540015616... Set to 524286976.


[12:55:33] + Attempting to send results [December 9 12:55:33 UTC]
[12:55:34] + Results successfully sent
[12:55:34] Thank you for your contribution to Folding@Home.
[12:55:38] - Preparing to get new work unit...
[12:55:38] + Attempting to get work packet
[12:55:38] - Connecting to assignment server
[12:55:39] - Successful: assigned to (171.67.108.11).
[12:55:39] + News From Folding@Home: GPU folding beta
[12:55:39] Loaded queue successfully.
[12:55:42] + Closed connections
[12:55:47] 
[12:55:47] + Processing work unit
[12:55:47] Core required: FahCore_11.exe
[12:55:47] Core found.
[12:55:47] Working on queue slot 08 [December 9 12:55:47 UTC]
[12:55:47] + Working ...
[12:55:47] 
[12:55:47] *------------------------------*
[12:55:47] Folding@Home GPU Core - Beta
[12:55:47] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[12:55:47] 
[12:55:47] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[12:55:47] Build host: amoeba
[12:55:47] Board Type: Nvidia
[12:55:47] Core      : 
[12:55:47] Preparing to commence simulation
[12:55:47] - Looking at optimizations...
[12:55:47] - Created dyn
[12:55:47] - Files status OK
[12:55:47] - Expanded 92328 -> 489240 (decompressed 529.8 percent)
[12:55:47] Called DecompressByteArray: compressed_data_size=92328 data_size=489240, decompressed_data_size=489240 diff=0
[12:55:47] - Digital signature verified
[12:55:47] 
[12:55:47] Project: 5753 (Run 9, Clone 231, Gen 0)
[12:55:47] 
[12:55:47] Assembly optimizations on if available.
[12:55:47] Entering M.D.
[12:55:54] Working on Protein
[12:55:54] mdrun_gpu returned 
[12:55:54] Going to send back what have done -- stepsTotalG=0
[12:55:54] Work fraction=0.0000 steps=0.
[12:55:58] logfile size=0 infoLength=0 edr=0 trr=25
[12:55:58] - Writing 637 bytes of core data to disk...
[12:55:58] Done: 125 -> 124 (compressed to 99.2 percent)
[12:55:58]   ... Done.
[12:56:05] 
[12:56:05] Folding@home Core Shutdown: UNSTABLE_MACHINE
[12:56:09] CoreStatus = 7A (122)
[12:56:09] Sending work to server
[12:56:09] Project: 5753 (Run 9, Clone 231, Gen 0)
[12:56:09] - Read packet limit of 540015616... Set to 524286976.


[12:56:09] + Attempting to send results [December 9 12:56:09 UTC]
[12:56:10] + Results successfully sent
[12:56:10] Thank you for your contribution to Folding@Home.
[12:56:14] - Preparing to get new work unit...
[12:56:14] + Attempting to get work packet
[12:56:14] - Connecting to assignment server
[12:56:15] - Successful: assigned to (171.67.108.11).
[12:56:15] + News From Folding@Home: GPU folding beta
[12:56:15] Loaded queue successfully.
[12:56:18] + Closed connections
[12:56:23] 
[12:56:23] + Processing work unit
[12:56:23] Core required: FahCore_11.exe
[12:56:23] Core found.
[12:56:23] Working on queue slot 09 [December 9 12:56:23 UTC]
[12:56:23] + Working ...
[12:56:23] 
[12:56:23] *------------------------------*
[12:56:23] Folding@Home GPU Core - Beta
[12:56:23] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[12:56:23] 
[12:56:23] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[12:56:23] Build host: amoeba
[12:56:23] Board Type: Nvidia
[12:56:23] Core      : 
[12:56:23] Preparing to commence simulation
[12:56:23] - Looking at optimizations...
[12:56:23] - Created dyn
[12:56:23] - Files status OK
[12:56:23] - Expanded 92198 -> 489240 (decompressed 530.6 percent)
[12:56:23] Called DecompressByteArray: compressed_data_size=92198 data_size=489240, decompressed_data_size=489240 diff=0
[12:56:23] - Digital signature verified
[12:56:23] 
[12:56:23] Project: 5753 (Run 6, Clone 232, Gen 0)
[12:56:23] 
[12:56:23] Assembly optimizations on if available.
[12:56:23] Entering M.D.
[12:56:30] Working on Protein
[12:56:31] mdrun_gpu returned 
[12:56:31] Going to send back what have done -- stepsTotalG=0
[12:56:31] Work fraction=0.0000 steps=0.
[12:56:35] logfile size=0 infoLength=0 edr=0 trr=25
[12:56:35] - Writing 637 bytes of core data to disk...
[12:56:35] Done: 125 -> 124 (compressed to 99.2 percent)
[12:56:35]   ... Done.
[12:56:39] 
[12:56:39] Folding@home Core Shutdown: UNSTABLE_MACHINE
[12:56:43] CoreStatus = 7A (122)
[12:56:43] Sending work to server
[12:56:43] Project: 5753 (Run 6, Clone 232, Gen 0)
[12:56:43] - Read packet limit of 540015616... Set to 524286976.


[12:56:43] + Attempting to send results [December 9 12:56:43 UTC]
[12:56:44] + Results successfully sent
[12:56:44] Thank you for your contribution to Folding@Home.
[12:56:48] - Preparing to get new work unit...
[12:56:48] + Attempting to get work packet
[12:56:48] - Connecting to assignment server
[12:56:49] - Successful: assigned to (171.67.108.11).
[12:56:49] + News From Folding@Home: GPU folding beta
[12:56:49] Loaded queue successfully.
[12:56:52] + Closed connections
[12:56:57] 
[12:56:57] + Processing work unit
[12:56:57] Core required: FahCore_11.exe
[12:56:57] Core found.
[12:56:57] Working on queue slot 00 [December 9 12:56:57 UTC]
[12:56:57] + Working ...
[12:56:57] 
[12:56:57] *------------------------------*
[12:56:57] Folding@Home GPU Core - Beta
[12:56:57] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[12:56:57] 
[12:56:57] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[12:56:57] Build host: amoeba
[12:56:57] Board Type: Nvidia
[12:56:57] Core      : 
[12:56:57] Preparing to commence simulation
[12:56:57] - Looking at optimizations...
[12:56:57] - Created dyn
[12:56:57] - Files status OK
[12:56:57] - Expanded 91176 -> 489240 (decompressed 536.5 percent)
[12:56:57] Called DecompressByteArray: compressed_data_size=91176 data_size=489240, decompressed_data_size=489240 diff=0
[12:56:57] - Digital signature verified
[12:56:57] 
[12:56:57] Project: 5753 (Run 13, Clone 232, Gen 0)
[12:56:57] 
[12:56:57] Assembly optimizations on if available.
[12:56:57] Entering M.D.
[12:57:04] Working on Protein
[12:57:05] mdrun_gpu returned 
[12:57:05] Going to send back what have done -- stepsTotalG=0
[12:57:05] Work fraction=0.0000 steps=0.
[12:57:09] logfile size=0 infoLength=0 edr=0 trr=25
[12:57:09] - Writing 637 bytes of core data to disk...
[12:57:09] Done: 125 -> 123 (compressed to 98.4 percent)
[12:57:09]   ... Done.
[12:57:16] 
[12:57:16] Folding@home Core Shutdown: UNSTABLE_MACHINE
[12:57:19] CoreStatus = 7A (122)
[12:57:19] Sending work to server
[12:57:19] Project: 5753 (Run 13, Clone 232, Gen 0)
[12:57:19] - Read packet limit of 540015616... Set to 524286976.


[12:57:19] + Attempting to send results [December 9 12:57:19 UTC]
[12:57:20] + Results successfully sent
[12:57:20] Thank you for your contribution to Folding@Home.
[12:57:24] EUE limit exceeded. Pausing 24 hours.
Running on GeForce 8400, Vista Home Premium.
Five units of the same project in a row, all failed very near the start. Note log starts with completion of previous (successful) unit.

Is this a problem unit, or has my h/w failed? (No sign of unusual high temp)

David
Image
sortofageek
Site Admin
Posts: 3111
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: Project 5753 multiple failures at start

Post by sortofageek »

Hi davidcoton (team 0),
Your WU (P5753 R8 C231 G1) was added to the stats database on 2008-12-09 06:48:56 for 0 points of credit.
It is difficult to tell if it is a problem WU or not. At this point, yours is the only report in the database of an attempt to return it.
Ivoshiee
Site Moderator
Posts: 822
Joined: Sun Dec 02, 2007 12:05 am
Location: Estonia

Re: Project 5753 multiple failures at start

Post by Ivoshiee »

The work files are somehow reported too short (sum 300 bytes). You should add up verbosity level, maybe it will show more info.
anko1
Posts: 438
Joined: Mon Dec 03, 2007 1:31 am
Hardware configuration: Old Faithful CPU: Windows Graphical 5.03; Intel Pentium 4 Processor 540
(3.2GHz) HT;Windows XP
Big Red: Windows SMP Console 6.29; Windows GPU console 6.20r1; Intel Q9450 2.66G; ASUS P5Q 775 P45; [BFG 9800GTX+ old graphics card] NVidia GeForce 8800 GTX [as of 5/9/09]; Windows XP Pro SP3
Lenovo Think Pad: Windows 6.29 w/ SMP; Windows GPU Console 6.20r1 systray; Intel QX9300; NVIDIA Quadro FX-3700M; Windows XP Professional
Location: SF Peninsula

Re: Project 5753 multiple failures at start

Post by anko1 »

I have an EUE on this project also (and vervbosity 9 - hope it helps): Project: 5753 (Run 12, Clone 154, Gen 2)

Code: Select all

[07:22:12] + Closed connections
[07:22:12] 
[07:22:12] + Processing work unit
[07:22:12] Core required: FahCore_11.exe
[07:22:12] Core found.
[07:22:12] Working on queue slot 01 [December 10 07:22:12 UTC]
[07:22:12] + Working ...
[07:22:12] - Calling '.\FahCore_11.exe -dir work/ -suffix 01 -priority 96 -nocpulock -checkpoint 15 -verbose -lifeline 4968 -version 620'

[07:22:12] 
[07:22:12] *------------------------------*
[07:22:12] Folding@Home GPU Core - Beta
[07:22:12] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[07:22:12] 
[07:22:12] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[07:22:12] Build host: amoeba
[07:22:12] Board Type: Nvidia
[07:22:12] Core      : 
[07:22:12] Preparing to commence simulation
[07:22:12] - Looking at optimizations...
[07:22:12] - Created dyn
[07:22:12] - Files status OK
[07:22:12] - Expanded 96632 -> 489240 (decompressed 506.2 percent)
[07:22:12] Called DecompressByteArray: compressed_data_size=96632 data_size=489240, decompressed_data_size=489240 diff=0
[07:22:12] - Digital signature verified
[07:22:12] 
[07:22:12] Project: 5753 (Run 12, Clone 154, Gen 2)
[07:22:12] 
[07:22:12] Assembly optimizations on if available.
[07:22:12] Entering M.D.
[07:22:19] Working on Protein
[07:22:19] Run: exception thrown during GuardedRun
[07:22:19] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[07:22:19] Going to send back what have done -- stepsTotalG=0
[07:22:19] Work fraction=0.0000 steps=0.
[07:22:23] logfile size=8969 infoLength=8969 edr=0 trr=23
[07:22:23] - Writing 9505 bytes of core data to disk...
[07:22:23] Done: 8993 -> 3226 (compressed to 35.8 percent)
[07:22:23]   ... Done.
[07:22:23] 
[07:22:23] Folding@home Core Shutdown: UNSTABLE_MACHINE
[07:22:26] CoreStatus = 7A (122)
[07:22:26] Sending work to server
[07:22:26] Project: 5753 (Run 12, Clone 154, Gen 2)
[07:22:26] - Read packet limit of 540015616... Set to 524286976.


[07:22:26] + Attempting to send results [December 10 07:22:26 UTC]
[07:22:26] - Reading file work/wuresults_01.dat from core
[07:22:26]   (Read 3738 bytes from disk)
[07:22:26] Connecting to http://171.67.108.11:8080/
[07:22:26] Posted data.
[07:22:26] Initial: 0000; Conversation time very short, giving reduced weight in bandwidth avg
[07:22:26] - Uploaded at ~9 kB/s
[07:22:26] - Averaged speed for that direction ~34 kB/s
[07:22:26] + Results successfully sent
[07:22:26] Thank you for your contribution to Folding@Home.
Also: Project: 5753 (Run 0, Clone 165, Gen 1)

Code: Select all

[07:22:32] + Closed connections
[07:22:37] 
[07:22:37] + Processing work unit
[07:22:37] Core required: FahCore_11.exe
[07:22:37] Core found.
[07:22:37] Working on queue slot 02 [December 10 07:22:37 UTC]
[07:22:37] + Working ...
[07:22:37] - Calling '.\FahCore_11.exe -dir work/ -suffix 02 -priority 96 -nocpulock -checkpoint 15 -verbose -lifeline 4968 -version 620'

[07:22:37] 
[07:22:37] *------------------------------*
[07:22:37] Folding@Home GPU Core - Beta
[07:22:37] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[07:22:37] 
[07:22:37] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[07:22:37] Build host: amoeba
[07:22:37] Board Type: Nvidia
[07:22:37] Core      : 
[07:22:37] Preparing to commence simulation
[07:22:37] - Looking at optimizations...
[07:22:37] - Created dyn
[07:22:37] - Files status OK
[07:22:38] - Expanded 96581 -> 489240 (decompressed 506.5 percent)
[07:22:38] Called DecompressByteArray: compressed_data_size=96581 data_size=489240, decompressed_data_size=489240 diff=0
[07:22:38] - Digital signature verified
[07:22:38] 
[07:22:38] Project: 5753 (Run 0, Clone 165, Gen 1)
[07:22:38] 
[07:22:38] Assembly optimizations on if available.
[07:22:38] Entering M.D.
[07:22:44] Working on Protein
[07:22:49] Run: exception thrown during GuardedRun
[07:22:49] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[07:22:49] Going to send back what have done -- stepsTotalG=0
[07:22:49] Work fraction=0.0000 steps=0.
[07:22:53] logfile size=8970 infoLength=8970 edr=0 trr=23
[07:22:53] - Writing 9506 bytes of core data to disk...
[07:22:53] Done: 8994 -> 3221 (compressed to 35.8 percent)
[07:22:53]   ... Done.
[07:22:53] 
[07:22:53] Folding@home Core Shutdown: UNSTABLE_MACHINE
[07:22:55] CoreStatus = 7A (122)
[07:22:55] Sending work to server
[07:22:55] Project: 5753 (Run 0, Clone 165, Gen 1)
[07:22:55] - Read packet limit of 540015616... Set to 524286976.


[07:22:55] + Attempting to send results [December 10 07:22:55 UTC]
[07:22:55] - Reading file work/wuresults_02.dat from core
[07:22:55]   (Read 3733 bytes from disk)
[07:22:55] Connecting to http://171.67.108.11:8080/
[07:22:56] Posted data.
[07:22:56] Initial: 0000; - Uploaded at ~4 kB/s
[07:22:56] - Averaged speed for that direction ~28 kB/s
[07:22:56] + Results successfully sent
[07:22:56] Thank you for your contribution to Folding@Home.
And Project: 5753 (Run 3, Clone 182, Gen 1)

Code: Select all

[07:23:01] + Closed connections
[07:23:06] 
[07:23:06] + Processing work unit
[07:23:06] Core required: FahCore_11.exe
[07:23:06] Core found.
[07:23:06] Working on queue slot 03 [December 10 07:23:06 UTC]
[07:23:06] + Working ...
[07:23:06] - Calling '.\FahCore_11.exe -dir work/ -suffix 03 -priority 96 -nocpulock -checkpoint 15 -verbose -lifeline 4968 -version 620'

[07:23:06] 
[07:23:06] *------------------------------*
[07:23:06] Folding@Home GPU Core - Beta
[07:23:06] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[07:23:06] 
[07:23:06] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[07:23:06] Build host: amoeba
[07:23:06] Board Type: Nvidia
[07:23:06] Core      : 
[07:23:06] Preparing to commence simulation
[07:23:06] - Looking at optimizations...
[07:23:06] - Created dyn
[07:23:06] - Files status OK
[07:23:06] - Expanded 96745 -> 489240 (decompressed 505.7 percent)
[07:23:06] Called DecompressByteArray: compressed_data_size=96745 data_size=489240, decompressed_data_size=489240 diff=0
[07:23:06] - Digital signature verified
[07:23:06] 
[07:23:06] Project: 5753 (Run 3, Clone 182, Gen 1)
[07:23:06] 
[07:23:06] Assembly optimizations on if available.
[07:23:06] Entering M.D.
[07:23:13] Working on Protein
[07:23:14] Run: exception thrown during GuardedRun
[07:23:14] Run: exception thrown in GuardedRun -- Gromacs cannot continue further.
[07:23:14] Going to send back what have done -- stepsTotalG=0
[07:23:14] Work fraction=0.0000 steps=0.
[07:23:18] logfile size=7395 infoLength=7395 edr=0 trr=23
[07:23:18] - Writing 7931 bytes of core data to disk...
[07:23:18] Done: 7419 -> 2756 (compressed to 37.1 percent)
[07:23:18]   ... Done.
[07:23:18] 
[07:23:18] Folding@home Core Shutdown: UNSTABLE_MACHINE
[07:23:21] CoreStatus = 7A (122)
[07:23:21] Sending work to server
[07:23:21] Project: 5753 (Run 3, Clone 182, Gen 1)
[07:23:21] - Read packet limit of 540015616... Set to 524286976.


[07:23:21] + Attempting to send results [December 10 07:23:21 UTC]
[07:23:21] - Reading file work/wuresults_03.dat from core
[07:23:21]   (Read 3268 bytes from disk)
[07:23:21] Connecting to http://171.67.108.11:8080/
[07:23:21] Posted data.
[07:23:21] Initial: 0000; Conversation time very short, giving reduced weight in bandwidth avg
[07:23:21] - Uploaded at ~8 kB/s
[07:23:21] - Averaged speed for that direction ~26 kB/s
[07:23:21] + Results successfully sent
[07:23:21] Thank you for your contribution to Folding@Home.
Edit: maybe it really is me. I also found similar EUEs for
Project: 5754 (Run 7, Clone 55, Gen 11)
Project: 5754 (Run 1, Clone 148, Gen 3)

Also I show 13 5753s in my stats and 6 5754s. However, the fact that I really haven't had problems to speak of until now and didn't do anything different to my machine puzzles me.

Further edit: I'm now working on Project: 5761 (Run 3, Clone 107, Gen 28), and it's currently up to 17% [knock on wood].

Editing again. :-) I've now completed 3 GPU units w/o trouble, though none of them are 5753 or 5754.
sortofageek
Site Admin
Posts: 3111
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: Project 5753 multiple failures at start

Post by sortofageek »

Hi anko1. :)

Too soon to tell, but there is no evidence it is you.


Project: 5753 (Run 12, Clone 154, Gen 2)
Two have returned this one for 0 points

Project: 5753 (Run 0, Clone 165, Gen 1)
Only you have returned it. 0 points

Project: 5753 (Run 3, Clone 182, Gen 1)
Only you have returned it. 0 points

Project: 5754 (Run 7, Clone 55, Gen 11)
Only you have returned it. 0 points

Project: 5754 (Run 1, Clone 148, Gen 3)
Two have returned this one for 0 points

Project: 5761 (Run 3, Clone 107, Gen 28),
Only you have returned it. 0 points (oops)

Correction on that last one:
Hi anko1 (team 47815),
Your WU (P5761 R3 C107 G28) was added to the stats database on 2008-12-10 12:47:04 for 384 points of credit.
anko1
Posts: 438
Joined: Mon Dec 03, 2007 1:31 am
Hardware configuration: Old Faithful CPU: Windows Graphical 5.03; Intel Pentium 4 Processor 540
(3.2GHz) HT;Windows XP
Big Red: Windows SMP Console 6.29; Windows GPU console 6.20r1; Intel Q9450 2.66G; ASUS P5Q 775 P45; [BFG 9800GTX+ old graphics card] NVidia GeForce 8800 GTX [as of 5/9/09]; Windows XP Pro SP3
Lenovo Think Pad: Windows 6.29 w/ SMP; Windows GPU Console 6.20r1 systray; Intel QX9300; NVIDIA Quadro FX-3700M; Windows XP Professional
Location: SF Peninsula

Re: Project 5753 multiple failures at start

Post by anko1 »

Thanks for checking and the reassurance, sortofageek. :-)

Edit: I may be confused by times and my unit came in after you checked (though I thought you said it showed I finished it, or at least I implied that), but my log shows a successful completion of Project: 5761 (Run 3, Clone 107, Gen 28):

Code: Select all

[17:00:30] + Closed connections
[17:00:30] 
[17:00:30] + Processing work unit
[17:00:30] Core required: FahCore_11.exe
[17:00:30] Core found.
[17:00:30] Working on queue slot 06 [December 10 17:00:30 UTC]
[17:00:30] + Working ...
[17:00:30] - Calling '.\FahCore_11.exe -dir work/ -suffix 06 -priority 96 -nocpulock -checkpoint 15 -verbose -lifeline 4940 -version 620'

[17:00:31] 
[17:00:31] *------------------------------*
[17:00:31] Folding@Home GPU Core - Beta
[17:00:31] Version 1.19 (Mon Nov 3 09:34:13 PST 2008)
[17:00:31] 
[17:00:31] Compiler  : Microsoft (R) 32-bit C/C++ Optimizing Compiler Version 14.00.50727.762 for 80x86 
[17:00:31] Build host: amoeba
[17:00:31] Board Type: Nvidia
[17:00:31] Core      : 
[17:00:31] Preparing to commence simulation
[17:00:31] - Looking at optimizations...
[17:00:31] - Created dyn
[17:00:31] - Files status OK
[17:00:31] - Expanded 68544 -> 357580 (decompressed 521.6 percent)
[17:00:31] Called DecompressByteArray: compressed_data_size=68544 data_size=357580, decompressed_data_size=357580 diff=0
[17:00:31] - Digital signature verified
[17:00:31] 
[17:00:31] Project: 5761 (Run 3, Clone 107, Gen 28)
[17:00:31] 
[17:00:31] Assembly optimizations on if available.
[17:00:31] Entering M.D.
[17:00:38] Working on Protein
[17:00:40] Client config found, loading data.
[17:00:40] Starting GUI Server
[17:02:03] Completed 1%
      {snip}      
[19:49:39] Completed 99%
[19:51:30] Completed 100%
[19:51:30] Successful run
[19:51:30] DynamicWrapper: Finished Work Unit: sleep=10000
[19:51:40] Reserved 78760 bytes for xtc file; Cosm status=0
[19:51:40] Allocated 78760 bytes for xtc file
[19:51:40] - Reading up to 78760 from "work/wudata_06.xtc": Read 78760
[19:51:40] Read 78760 bytes from xtc file; available packet space=786351704
[19:51:40] xtc file hash check passed.
[19:51:40] Reserved 23472 23472 786351704 bytes for arc file=<work/wudata_06.trr> Cosm status=0
[19:51:40] Allocated 23472 bytes for arc file
[19:51:40] - Reading up to 23472 from "work/wudata_06.trr": Read 23472
[19:51:40] Read 23472 bytes from arc file; available packet space=786328232
[19:51:40] trr file hash check passed.
[19:51:40] Allocated 560 bytes for edr file
[19:51:40] Read bedfile
[19:51:40] edr file hash check passed.
[19:51:40] Allocated 30978 bytes for logfile
[19:51:41] Read logfile
[19:51:41] GuardedRun: success in DynamicWrapper
[19:51:41] GuardedRun: done
[19:51:41] Run: GuardedRun completed.
[19:51:42] - Writing 134282 bytes of core data to disk...
[19:51:42] Done: 133770 -> 110861 (compressed to 82.8 percent)
[19:51:42]   ... Done.
[19:51:42] - Shutting down core 
[19:51:42] 
[19:51:42] Folding@home Core Shutdown: FINISHED_UNIT
[19:51:45] CoreStatus = 64 (100)
[19:51:45] Unit 6 finished with 96 percent of time to deadline remaining.
[19:51:45] Updated performance fraction: 0.947375
[19:51:45] Sending work to server
[19:51:45] Project: 5761 (Run 3, Clone 107, Gen 28)
[19:51:45] - Read packet limit of 540015616... Set to 524286976.


[19:51:45] + Attempting to send results [December 10 19:51:45 UTC]
[19:51:45] - Reading file work/wuresults_06.dat from core
[19:51:45]   (Read 111373 bytes from disk)
[19:51:45] Connecting to http://171.64.65.106:8080/
[19:51:47] Posted data.
[19:51:47] Initial: 0000; - Uploaded at ~36 kB/s
[19:51:48] - Averaged speed for that direction ~23 kB/s
[19:51:48] + Results successfully sent
[19:51:48] Thank you for your contribution to Folding@Home.
[19:51:48] + Number of Units Completed: 161
sortofageek
Site Admin
Posts: 3111
Joined: Fri Nov 30, 2007 8:06 pm
Location: Team Helix
Contact:

Re: Project 5753 multiple failures at start

Post by sortofageek »

My error, eyes must have been fading. :e?:

I checked again and that one is good, yes. :)

Hi anko1 (team 47815),
Your WU (P5761 R3 C107 G28) was added to the stats database on 2008-12-10 12:47:04 for 384 points of credit.
anko1
Posts: 438
Joined: Mon Dec 03, 2007 1:31 am
Hardware configuration: Old Faithful CPU: Windows Graphical 5.03; Intel Pentium 4 Processor 540
(3.2GHz) HT;Windows XP
Big Red: Windows SMP Console 6.29; Windows GPU console 6.20r1; Intel Q9450 2.66G; ASUS P5Q 775 P45; [BFG 9800GTX+ old graphics card] NVidia GeForce 8800 GTX [as of 5/9/09]; Windows XP Pro SP3
Lenovo Think Pad: Windows 6.29 w/ SMP; Windows GPU Console 6.20r1 systray; Intel QX9300; NVIDIA Quadro FX-3700M; Windows XP Professional
Location: SF Peninsula

Re: Project 5753 multiple failures at start

Post by anko1 »

Well, it was almost midnight here, so at least that or later for you! Thanks for rechecking for me. :-)
Post Reply